Handheld slot punch punches name badges, security cards or any other identifying documents that need to be hung on a lanyard. Slot hole measures 15mm in length and 4mm in width. For a reliable performance, durable slot punch is made with an all-metal construction with chrome plating.
|
Two-hole metal punch features an innovative, stylish two-tone design and plastic paper gauge. Use to punch 1/4" holes in up to 60 sheets of 20 lb. paper. Rubber base protects worksurface.
|
Replacement punch kit features precision-ground Samurai Steel and hollow-core punch head for Carl Extra Heavy-duty Three-hole Punch with a 150-sheet capacity.
|
Replacement punch head kit supplies Carl Manufacturing's Extra Heavy-duty Three-Hole Punch. This set includes three 11/32" punch heads and six drill disks.
|
The Wheeler Engineering Delta Series AR Bolt Catch Install Punch Kit starts bolt catch roll pins easily with the starter punch and finishes installation flush with the finishing punch. It is flat on one side for proper alignment and is rubber overmolded to protect the firearm.
|
1/4" NUMER 8 PILOT PUNCH
Rounded end that fits snugly within roll pin
1.6 oz
5.5 x .44 x .44
Standard SAE Measurement
25007 1/4 IN. #8 PILOT PUNCH
|
LINE UP PUNCH
Used to align the holes through which rivets, pins or bolts will be inserted, but not for driving the hardware
Black oxide finish is available for rust protection
Made in the USA
43902 1/8 IN. X8 LINE UP PUNCH
SIZE:1/8"x8"
|
PRICK PUNCH
Used tp scribe lines in metal before cutting or riveting
Sharp angle of the punch is specifically designed to scribe lines in metal & the tool is covered in black oxide finish to help prevent rust
Made in the USA
73001 5/16X4-1/2 IN. PRICK PUNCH
SIZE:5/16"x4-1/2"
|
SHORT PIN PUNCH SET
Alloy steel construction is durable & sturdy
Rust-preventative coating that ensures prolonged use
Best used to remove loosened pins & keys without damaging
89032 3PC SHORT PIN PUNCH SET
|
PIN PUNCH
1-piece design
Steel construction
Blast finish
Used to drive out & remove already loosened pins & keys
Meets/Exceeds ASME
71105 3/8X6 IN. PIN PUNCH
SIZE:3/8"x6"
|
SOLID PUNCH
Used for loosening seized or tight pins or keys
Or knocking out rivets
Used in conjunction with pin punches
Covered w/ a black oxide finish to protect from rusting
Made in the USA
70301 3/8X6-1/2 IN. SOLID PUNCH
SIZE:1/8"
|
LINE-UP PUNCH
Used to align holes through which rivets, pins or bolts will be inserted, but not for driving the hardware
Black oxide finish is available for rust protection
Made in the USA
72010 1/8X8 IN. LINE UP PUNCH
SIZE:1/8"
|
SOLID PUNCH
Used for loosening seized or tight pins or keys or knocking out rivets
Used in conjunction w/ pin punches
Covered in black oxide to protect from rusting
Made in the USA
70003 1/4X5 IN. SOLID PUNCH
SIZE:1/4"x5"
|
3PC PUNCH SET
74001 5/16" reg ec center punch
43502 7/32" x 5" prick punch
24008 7/16" center punch 1/4" pt
89082 3PC PUNCH SET
|
CENTER PUNCH
Used for piercing, marking or starting drills in metal & other materials
Points differ to achieve the mose appropriate hole size
Not meant for scribing lines in metal
Black oxide finish is added to protect from rust
Made in the USA
74003 1/2X6 IN. CENTER PUNCH
SIZE:1/2"x6"
|
SOLID PUNCH
For loosening frozen or tight pins & keys, or knocking out rivets
Once loosened, follow up w/ a pin punch to drive the pin or key out
Made in the USA
70001 1/8X5 SOLID PUNCH
SIZE:1/8"
|
SOLID PUNCH
Used for loosening seized or tight pins or keys or knocking out rivets
Used in conjunction with pin punches
Punches are covered w/ a black oxide finish to protect from rusting
Made in the USA
70002 3/16 IN. X5 SOLID PUNCH
SIZE:3/16"
|
PRICK PUNCH
Used to scribe lines in metal before cutting or riveting
Sharp angle of the punch is specifically designed to scribe lines in metal, & tools is covered in black oxide finish to help prevent rust
Made in the USA
73002 3/8X5 IN. PRICK PUNCH
SIZE:3/8"x5"
|
BRASS DRIFT PUNCH
Used instead of steel punches in non-marring -
applications & to constrain sparking
Consumable brass is designed not to mar steel
Made in the USA
25076 1/2 IN. BRASS DRIFT PUNCH
SIZE:1/2"
|
LINE-UP PUNCH
Used to align holes through which rivets, pins & bolts will be inserted, but not for driving the hardware
Black oxide finish is available for rust protection
Made in the USA
72011 5/32 IN. X9 IN. LINE UP PUNCH
SIZE:5/32"
|
SOLID PUNCH
Used for loosening seized or tight pins or keys or knocking out rivets
Used in conjuction w/ pin punches
Black oxide finish to protect from rusting
Made in the USA
70004 1/16X5 IN. SOLID PUNCH
SIZE:1/16"x5"
|
SCRATCH AWL
Used in auto & electrical work in tight spaces
Scribing lines, o-ring & cotter pin removal & breaking radiator connections
Shank larger for heavy-duty applications
Made in USA
46502 1/4 IN. X5-1/2 IN. SCRATCH AWL
SIZE:1/4x5-1/2"
|
SOLID PUNCH
Used for loosening seized or tight pins or keys or knocking out rivets
Used in conjunction w/ pin punches
Covered w/ black oxide finish to protect from rusting
Made in the USA
70000 3/32X5 IN. SOLID PUNCH
SIZE:3/32x5"
|
SCRATCH AWL
For scribing, starting holes & aligning holes in woods and other soft materials
3" short shaft is designed for precision work
Shank constructed w/ chrome vanadium steel for strength & durability
Fluted handle design provides multiple grip points to apply torque from various angles
Tough impact resistant acetate handle to standup to everyday use
73690 3 IN. SCRATCH AWL
|
Three-hole Heavy-duty Punch features three adjustable hole positions and soft pad grip. Use to drill 9/32" holes in up to 40 sheets of 20 lb. paper. Hole punch also features a paper guide.
|
- Terminates and cuts wire in a single punch
- Adjustable impact strength from high to low - Can be fitted with a wide variety of replacement blades - Ergonomic handle design for comfortable and secure - Includes a 110 blade with wire pick and spludger - Spare blade storage in the handle |
WILDE 8PC PUNCH CHISEL SET
Contains: 3/8", 5/8" & 3/4" cold chisels, -
3/8" center punch, 1/8" & 3/16" pin punch -
& 3/16" & 1/4" long taper punch
K 8.NP/CC 8PC PUNCH CHISEL SET
SIZE:8 pc
|
This item can NOT be shipped to these states CA
SPRING TOOL COMBINATION HAMMERLESS NAIL SET Hammerless, double-ended nail set and starter Start nails and brads without hitting fingers 3500 LBS of impact striking force Great in tight spaces Does not damage the wood or trim Fixes problems when nail gun fails to drive brad below the surface of the wood 32R42-1 COMBO NAIL SET SIZE:2/32" & 2/32" |
PLASTIC SCRATCH AWL
Drop forged 3" steel blade goes through handle
Shock resistant durable plastic handle
SC3C PLASTIC SCRATCH AWL
|
HANDYMAN NAIL SET
3 nails included: 1/32", 2/32" & 3/32"
58-230 HANDYMAN NAIL SET
SIZE:3 Pc Set
3 Piece set of above 3 sizes
|
This item can NOT be shipped to these states CA
KNURLED BRASS DRIFT PUNCH Used instead of steel punches in non-marring applications and to constrain sparking Consumable brass is designed not to mar steel Made in the USA 25075 3/4 IN. BRASS DRIFT PUNCH SIZE:3/4" |
This item can NOT be shipped to these states CA
SPRING TOOL COMBINATION HAMMERLESS NAIL SET Hammerless, double-ended nail set and starter Start nails and brads without hitting fingers 3500 LBS of impact striking force Great in tight spaces Does not damage the wood or trim Fixes problems when nail gun fails to drive brad below the surface of the wood 32R12-1 COMBINATION NAIL SET SIZE:1/32 & 2/32" |
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |