• Nickel-plated motor can for corrosion resistance
  
• Stiffening ribs to reduce housing distortion
  
• Motor cap to seal wires and motor for water resistance
  
• Five-blade fan maximize airflow and efficiency
  
• Tabs in intake and exhaust hold ventilation hose/clamp firmly in place
  
• Low amp draw motor for longer blower and battery life
  
• Built-in mounting feet allow easy vertical or horizontal install

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Efficient high-volume air flow
  
• Quiet operation
  
• Low amp draw
  
• Slip-on inlet and outlet ducting connections
  
• Sealed motor shaft for moisture protection
  
• Corrosion resistant nickel-plated motor housing
  
• IMCI (CE)
  
• USCG 183.410 Compliant: Ignition protected

• Approvals: CE
  
• Dimensions (H x W x D): 76 x 127 x 81 (mm)
  
• ElectricalCharacteristics: 2.9 Amp
  
• Flow Rate (US gallons & litres): 135 CFM @ Open Flow
  
• Fuse Size: 4 (amp)
  
• Product Inlet Fitting: 3" (76 mm) Ducting
  
• Product Outlet Fitting: 3" (76 mm) Ducting
  
• Voltage: 13.6 (Vdc)

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Flexmounting for 360° adjustable outlet
  
• Slip-on inlet and outlet ducting connection
  
• Low current draw
  
• Dimensionally stable quiet running Delrin rotors
  
• Corrosion resistant materials throughout
  
• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)
  
• ISO 9097 MARINE (Electric Fans)

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads.
  
• Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers
  
• Five blade, quiet, highly efficient, and reliable operation will provide years of long life
  
• Compact and with mounting feet makes it easy to install on any flat surface

• Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads.
  
• Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers
  
• Five blade, quiet, highly efficient, and reliable operation will provide years of long life
  
• Compact and with mounting feet makes it easy to install on any flat surface

• Tough Reinforced Plastic Housing
  
• Mount to any Flat surface
  
• Slip-On Inlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A. Type Accepted
  
• Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
  
• Complies with Complies with ISO 9097 MARINE

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Tough Reinforced Plastic Housing
  
• Universal flexmount bracket permits outlet to face any direction
  
• Slip-On Inlet and Outlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A. Type Accepted
  
• Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
  
• Complies with Complies with ISO 9097 MARINE

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Efficient high-volume air flow
  
• Quiet operation
  
• Low amp draw
  
• Slip-on inlet and outlet ducting connections
  
• Sealed motor shaft for moisture protection
  
• Corrosion resistant nickel-plated motor housing
  
• IMCI (CE)
  
• USCG 183.410 Compliant: Ignition protected

• Approvals: CE
  
• Dimensions (H x W x D): 102 x 152 x 106 (mm)
  
• ElectricalCharacteristics: 4.3 Amp
  
• Flow Rate (US gallons & litres): 235 CFM @ Open Flow
  
• Fuse Size: 7 (amp)
  
• Product Inlet Fitting: 4" (102 mm) Ducting
  
• Product Outlet Fitting: 4" (102 mm) Ducting
  
• Voltage: 13.6 (Vdc)

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Air Blower 1000 Inline 165 - 12V

7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 165mm length.

Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance. For continous duty. 7A fuse.

Features:

• Weight: 1.2 kg/2 lbs
• Dimensions: 165/6.5L x 220/8.7H x 178/7W mm/in 
• Type: 7" In-Line
• Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)

3" Blower Flange Mounted - 12V

Features:

• 3" ducts
• 12V
• 100 percent factory tested

Marine Air Blower 500 Flange - 12V

4″ flange mounted marine ventilation 12V radial blower with capacity 500 m3 per h, 324 CFM. Inlet 100mm, outlet 103mm.

Body in hermoplastic PA6 high durable white Nylon with integrated blower motor. 12A fuse.

Interchangeable with Johnson Pump 80-47417-01.

Features:

• Weight: 2.4 kg/ 5 lbs
• Dimensions: 290/11.4L x 257/10.12H x 150/5.9W mm/in 
• 4" Flange
• CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)

Marine Air Blower 750 Flange - 12V

6″ flange mounted marine ventilation 12V radial blower with capacity 750 m3 per h, 441 CFM. Inlet 150mm, outlet 103mm.

Body in hermoplastic PA6 high durable white Nylon with integrated blower motor. 10A fuse.

Interchangeable with Johnson Pump 80-47418-01.

Features:

• Weight: 2.7 kg/5 lbs
• Dimensions: 290/11.4L x 257/10.12H x 170/6.69W mm/in 
• 6" Flange
• CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)

• Tough Reinforced Plastic Housing
  
• Continuous duty motor with thermal overload
  
• Mount to any surface
  
• Slip-On Inlet and Outlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Corrosion-Resistant Materials Throughout

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Tough Reinforced Plastic Housing
  
• Mount to any surface
  
• Slip-On Inlet and Outlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A. Type Accepted
  
• Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
  
• Complies with ISO 9097 MARINE

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Tough Reinforced Plastic Housing
  
• Mounts to any flat surface
  
• Slip-on Inlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low-Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A Type Accepted
  
• Meets USCG Regulations 183.410 and ISO 8846 MARINE for ignition protection
  
• Complies with ISO 9097 MARINE VARIATIONS

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Tough Reinforced Plastic Housing
  
• Universal Flexmount Bracket permits outlet to face any direction
  
• Slip-On Inlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low-Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A Type Accepted
  
• Meets USCG Regulations 183.410 and ISO 8846 MARINE for ignition protection
  
• Complies with ISO 9097 MARINE VARIATIONS

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• 5,000 hr motor life for the heaviest of applications
  
• Continuous duty
  
• Efficient high volume air flow
  
• Outlet flange mounts directly on bulkhead
  
• Slip on inlet ducting connection
  
• Low current draw
  
• Corrosion resistant materials throughout
  
• Dimensionally stable quiet running Delrin rotors
  
• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)
  
• ISO 9097 MARINE (Electric Fans)

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Extended Life 5,000 Hour Motor
  
• Tough Reinforced Thermoset Plastic Housing
  
• Mounts to Any Flat Surface
  
• Slip-On Inlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low-Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A Type Accepted
  
• Meets USCG Electrical Regulations to Title 33
  
• Chapter I, Part 183
  
• Subpart I and ISO 8846 for Ignition Protection
  
• Complies with ISO 9097 Marine
  
• CE Conforms with EN 5008-1 for Supression of Electro-magnetic interference

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Tough Reinforced Plastic Housing
  
• Universal flexmount bracket permits outlet to face any direction
  
• Slip-On Inlet and Outlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A Type Accepted

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Extended Life Induction Motor
  
• Tough Reinforced Thermoset Plastic Housing
  
• Continuous duty motor with thermal overload protection
  
• Flexmount universal bracket permits outlet to face any direction
  
• Slip-On Inlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low-Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• 5,000 hr motor life for teh heaviest of applications.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Extended Life 5,000 Hour Motor
  
• Tough Reinforced Thermoset Plastic Housing
  
• Mounts To Any Flat Surface
  
• Slip-On Inlet Ducting Connection
  
• Efficient High Volume Air Flow
  
• Low-Current Draw
  
• Corrosion-Resistant Materials Throughout
  
• N.M.M.A. Type Accepted
  
• Meets USCG Electrical Regulations of Title 33
  
• Chapter I, Part 183
  
• Subpart I and IS0 8846 for Ignition Protection
  
• Complies with ISO 9097 Marine
  
• CE Conforms with EN 5008-1 for Supression of Electro-magnetic interference

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• 6 Blade Nylon Fan
  
• Heavy Duty Fan Housing
  
• Compact Design
  
• Extended Barbs for ease of Installation
  
• Sealed Motor & Wires for Corrosion Resistance
  
• Sealed Motor Shaft for Moisture Protection & Long Life
  
• Slotted Baseplate for Easy Mounting
  
• CE Listed
  
• 3 Year Warranty

• 6 Blade Nylon Fan
  
• Heavy Duty Fan Housing
  
• Compact Design
  
• Extended Barbs for ease of Installation
  
• Sealed Motor & Wires for Corrosion Resistance
  
• Sealed Motor Shaft for Moisture Protection & Long Life
  
• Slotted Baseplate for Easy Mounting
  
• CE Listed
  
• 3 Year Warranty

Air Blower 1000 In-Line 250 - 12V

7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 250mm length.

Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance. For continous duty. 7A fuse.

Interchangeable with Vetus Vent17812A.

Features:

• Weight: 1.4 kg/3 lbs
• Dimensions: 250/9.8L x 220/8.7H x 178/7W mm/in 
• Type: 7" In-Line
• Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)

• Fits models Sahara, Patriarch, Settler, Sawman, FX 3000, Sawyer, and all wood stoves manufactured prior to 2001.
• Dimensions: 6.5" W x 9.5" L x 7" H

• Fits all Drolet wood stoves manufactured after 2001, with the exception of the Hunter, Sahara, Escape 1800, Classic EPA, Patriarch, Settler, FX 3000, Sawman, Sawyer, Logwood and Wonderwood.
• Dimensions: 8" W x 11" L x 5" H