For table or radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. Cuts dadoes in everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super-smooth dado bottom and the flexibility of an
adjustable dado to handle undersized plywood. Anti-kickback design. Eliminated hub, added extra thick and stiff outside plate and gullet designed for max chip ejection to prevent chip buildup within stack. 3/32" thick chipper for adjusted cut widths in 1
/32" increments, doubles the number of slot widths available, and fits plywood 1/32" undersized from nominal width with less shimming. Shim set included for fine adjustments. Square tooth design, shorter and thicker, reduces drag in cuts an
d the materials guiding effects; also increases number of sharpenings obtainable. Includes four 1/8", one 3/32" and one 1/16" chipper; 1/8" kerf.
5/8" ROUND ARBOR
29/32" Max Cut - Carded
Dia In=8Teeth=24
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Use the Buffalo Tools DADO Blade to cut lumber, particle board, plywood, laminates and more. The 7.25 inch blade has 24 Tungsten carbide tipped teeth that can be re-sharpened to extend the life of the blade. 5/8 inch or 1 inch arbor
|
For the weekend woodworker to use on all table and radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. For underpowered saws because requires less power to feed. Negative hook angle makes flat bottom grooves and virtually s
plinter-free cuts. Anti-kickback design. Resharpenable set produces grooves from 1/4" to 13/16" in 1/16" increments. Includes 2 outside blades, four 2-wing 1/8" chippers and one 1/16" chipper; 1/8" kerf.
5/8" ROUND ARBOR
13/16" Max Cut - Carded
Dia In=8Teeth=12
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
CONTRACTOR SERIES FINISH SAW BLADE
Thin kerf circular finish saw blade for smooth-
cross cuts; has Blue Coat(TM) surface treatment
Resists heat build-up for longer blade life
Ideal for wet lumber
C3 micrograin carbide teeth resist wear
Fully hardened steel body with heat expansion -
slots and vents to prevent warping
Anti-kick back tooth design for added safety
10268 6-1/2 IN. 40T CONT BLADE
SIZE:6-1/2"-40 Tooth
ARBOR:5/8" Rd. Arbor
|
Thin kerf, 103", saw blade designed to cut through ferrous metals quickly and accurately leaving clean, burr free cuts. Used for cutting steel studs, steel pipe and steel sheet. For most mild steels under 1/8" thick. Used for crosscutting oak, pine, mala
mine, plywood and moulding. TCG tooth design, .090" plate, -2 degree hook angle, 1,800 max rpm.
1" ROUND ARBOR
Dia In=12Teeth=60
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Thin kerf, 103", saw blade designed to cut through ferrous metals quickly and accurately leaving clean, burr free cuts. Used for cutting steel studs, steel pipe and steel sheet. For most mild steels under 1/8" thick. Used for crosscutting oak, pine, mala
mine, plywood and moulding. TCG tooth design, .090" plate, -2 degree hook angle, 1,800 max rpm.
1" ROUND ARBOR
Dia In=14Teeth=72
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |