QUICK CHANGE COLLET NUT
For Moto Tools 245, 250 & Series 3 & later
For Tools 260, 270, 280 & Series 2 & later
For Freewheelers 275, 285, 370 & 380-
395, 595 & 850
MiniMite 750, MultiPro 770, Handpieces 235 & 237
For Moto Flex Tools 232 & 332
For Chainsavers Tools 241, 246, 277 & 8504
For Flexible Shaft Attachments 225 & 90199
4485 QUICK CHANGE COLLET NUT
DESC:Kit of 3 SizesCollet Nut Kit Contains one each of above collets
|
TYPE 27 METAL GRINDING WHEEL
Metal depressed center grinding wheel
Made with resin bond
Two-ply fiberglass reinforced wheel
Balanced design for long life & efficiency
5-4246 4.5 IN. METAL GRIND WHEEL
SIZE:4-1/2 x 1/8"
ARBOR:8-Jul
|
SKIL 4" X 36" BELT / DISC SANDER
Two-in-One sanding station with 4" x 36" -
belt sander and 6" disc sander
4.3 Amp - 3,450 RPM motor for performance
Stronger design belt drive and gear system
Cast aluminum table top comes fully assembled
Do bevel sanding from 0 to 45 degrees
Miter gauge for miter & compound sanding
Belt angle adjustment for sanding 0-90 degrees
3376-01 4X36 IN. BELT DISC SANDER
SIZE:4" x 36"
|
TYPE 27 H-P DPC METAL GRINDING DISC
High performance depressed center wheels
3 full sheets of fiberglass for durability
For heavy duty cutting and grinding of ferrous-
metals - steel-iron welds-edge grinding
A24R aluminum oxide grit- harder/premium grit
Size= wheel diameter x thickness x arbor hole size
Bulk pack
DW4419 4X1/4X5/8 GRINDNG WHEEL
SIZE:4" x 1/4"
ARBOR:5/8"
|
TUNGSTEN CARBIDE CUTTERS
Use for shaping, smoothing & material removal
Use on hardened steel & stainless steel
Also used on the following:
Cast iron, non-ferrous metals & plastics
Fired ceramics, hardwood & other hard materials
9903 TUNGSTEN CARBIDE CUTTER
SIZE:1/8"
POINT:Rounded
|
TYPE 27 METAL GRINDING WHEEL
Metal depressed center grinding wheel
Made with resin bond
Two-ply fiberglass reinforced wheel
Balanced design for long life & efficiency
5-4240 4 IN. METAL GRINDING WHEEL
SIZE:4 x 1/4"
ARBOR:8-May
|
TYPE 27 METAL GRINDING WHEEL
Metal depressed center grinding wheel
Made with resin bond
Two-ply fiberglass reinforced wheel
Balanced design for long life & efficiency
5-4245 4.5 IN. METAL GRIND WHEEL
SIZE:4-1/2 x 1/4"
ARBOR:8-Jul
|
TYPE 27 MASONRY GRINDING WHEEL
Made with silicone carbide
Fiberglass reinforcements for maximum strength
Designed not to load up
5-4231 4.5 IN. MASON GRIND WHEEL
SIZE:4-1/2 x 1/4"
ARBOR:8-Jul
|
BENCH GRINDING WHEEL
Aluminum oxide material
For metal grinding applications
Center hole 1"
Bushings included to fit other arbor-
sizes: 1/2 5/8 3/4 & 7/8"
88260-8 T66C 6X1X1 GRIND WHEEL
SIZE:6 x 1 x 1"
GRIT:Coarse
|
TYPE 27 CUTTING & GRINDING WHEELS
Depressed center wheel metal/stainless -
cutting and grinding wheel
A24N aluminum oxide grain - softer formulation
than A24R grit for fast cut or grind
Offers aggressive grinding & smoother operation
3 full sheets of fiberglass for durability -
and safety
7/8" arbor - maximum RPM 13,300
DWA4511 4-1/2 GRINDING WHEEL
SIZE:4-1/2"
THICKNESS:1/8"
|
BENCH GRINDING WHEEL
Aluminum oxide material
For metal grinding applications
Center hole 1"
Bushings included to fit other arbor-
sizes: 1/2 5/8 3/4 & 7/8"
88255-4 6X1X1 T66M GRIND WHEEL
SIZE:6 x 1 x 1"
GRIT:Medium
|
ROUND ALUMINUM OXIDE GRINDING STONE
Use on metals, castings, joints & rust
For general purpose grinding, -
sharpening & deburring
1/8" shank
8193 ALUM OXIDE GRINDING STONE
SIZE:5/8"
SHAPE:Round wheel
|
DRILL CUP WIRE BRUSH
Crimped wire cup brushes with 1/4" shank for -
use with electric / cordless drills
Maximum safe RPM speed: 4,500
Carded
76221 2-3/4 COARSE CUP BRUSH
SIZE:2-3/4"
DESC:Coarse
|
REPLACEMENT GRINDER FLANGE NUT SET
Fits most small angle grinders -
with 5/8" - 11 spindle
75099 GRINDER FLANGE NUT KIT
|
TYPE 27 HI-PERFORMANCE GRINDING WHEEL
High performance aluminum oxide grain for -
long life and high material removal
Smoother running wheel has aggressive -
cutting action - A24R grit
Has 3 full sheets of fiberglass for -
durability and safety
For H-D cutting & grinding on ferrous metals
Weld blending, pipe beveling & edge cutting
DW4999 7X1/4X5/8 GRINDNG WHEEL
SIZE:7" x 1/4"
ARBOR:5/8"-11
|
TYPE 1A ANGLE GRINDER METAL CUTTING WHEEL
Aluminum oxide grit & premium resin bond for -
professional cutting results using angle grinder
Extra thin thickness for fast clean cuts -
in all ferrous metals and stainless steel
Double fiberglass reinforced for safety -
and increased durability
5/8" arbor on 4" wheels - 7/8" on 4-1/2 & larger
SIZE= Diameter x Thickness - DESC= Pack & Grit
75523 4-1/2X.045 MTLGRND WHEEL
SIZE:4-1/2"x .045"
DESC:Bulk - A60T
|
5" - 8 HOLE SANDING DISC
8-hole Velcro hook & loop sanding discs
For random orbit sanders
Fits Skil, Bosch, B&D, DeWalt, Makita -
and Milwaukee
3723 5 IN. 120 HOOK & LOOP DISC
GRIT:120 Fine
QTY/PACK:5 Discs / Pack
|
TYPE 1A ANGLE GRINDER METAL CUTTING WHEEL
Aluminum oxide grit & premium resin bond for -
professional cutting results using angle grinder
Extra thin thickness for fast clean cuts -
in all ferrous metals and stainless steel
Double fiberglass reinforced for safety -
and increased durability
5/8" arbor on 4" wheels - 7/8" on 4-1/2 & larger
SIZE= Diameter x Thickness - DESC= Pack & Grit
75522 4-1/2X1/16 MTLGRND WHEEL
SIZE:4-1/2"x 1/16"
DESC:Bulk - A60T
|
5" - 8 HOLE SANDING DISC
8-hole Velcro hook & loop sanding discs
For random orbit sanders
Fits Skil, Bosch, B&D, DeWalt, Makita -
and Milwaukee
3724 5 IN. 80 HOOK & LOOP DISC
GRIT:80 Medium
QTY/PACK:5 Discs / Pack
|
TYPE 27 DEPRESED CENTER GRINDING WHEELS
Type 27 Metal - aluminum oxide grit and -
premium resin bond for professional results
For use on all types of ferrous metals
Fiberglass reinforced for safety and -
increased durability
A24R Spec.
For cutting and grinding applications
Size= wheel diameter / thickness
75544 4-1/2X1/4 MTLGRND WHEEL
SIZE:4-1/2" x 1/4"
ARBOR:7/8"
|
TYPE 27 RIGHT ANGLE METAL CUT OFF WHEEL
Type 27 aluminum oxide right angle cut-off-
blade for metal cutting applications
Unique thin design
For sheet metal, metal studs, angle iron -
and tubing
Size= blade diameter x thickness
42025 4.5X.045X5/8 GRIND WHEEL
SIZE:4-1/2" x .045
ARBOR:5/8/2011
|
TYPE 1A ANGLE GRINDER METAL CUTTING WHEEL
Aluminum oxide grit & premium resin bond for -
professional cutting results using angle grinder
Extra thin thickness for fast clean cuts -
in all ferrous metals and stainless steel
Double fiberglass reinforced for safety -
and increased durability
5/8" arbor on 4" wheels - 7/8" on 4-1/2 & larger
SIZE= Diameter x Thickness - DESC= Pack & Grit
75512 4X1/16 METAL GRIND WHEEL
SIZE:4"x 1/16"
DESC:Bulk - A36T
|
5" - 8 HOLE SANDING DISC
8-hole Velcro hook & loop sanding discs
For random orbit sanders
Fits Skil, Bosch, B&D, DeWalt, Makita -
and Milwaukee
3725 5 IN. 60 HOOK & LOOP DISC
GRIT:60 Coarse
QTY/PACK:5 Discs / Pack
|
MERIT FIBER ABRASIVE DISCS
Heavy-duty fiber backing disc offers -
strength, durability & tear resistance
Aluminum oxide grit for heavy stock -
removal to surface blending
For use with portable angle grinders
7/8" arbor hole
53310 4.5X7/8 50G FIBER DISC
SIZE:4-1/2" Diameter
DESC:50 Grit
|
5" - 8 HOLE SANDING DISC
8-hole Velcro hook & loop sanding discs
For random orbit sanders
Fits Skil, Bosch, B&D, DeWalt, Makita -
and Milwaukee
4142 5 IN. 80 HOOK & LOOP DISC
GRIT:80 Medium
QTY/PACK:15 Discs / Pack
|
5" - 8 HOLE SANDING DISC
8-hole Velcro hook & loop sanding discs
For random orbit sanders
Fits Skil, Bosch, B&D, DeWalt, Makita -
and Milwaukee
4140 5 IN. 220 HOOK & LOOP DISC
GRIT:220 Extra Fine
QTY/PACK:15 Discs / Pack
|
5" - 8 HOLE SANDING DISC
8-hole Velcro hook & loop sanding discs
For random orbit sanders
Fits Skil, Bosch, B&D, DeWalt, Makita -
and Milwaukee
4144 5 IN. 60 HOOK & LOOP DISC
GRIT:60 Coarse
QTY/PACK:15 Discs / Pack
|
5" - 8 HOLE SANDING DISC
8-hole Velcro hook & loop sanding discs
For random orbit sanders
Fits Skil, Bosch, B&D, DeWalt, Makita -
and Milwaukee
4141 5 IN. 120 HOOK & LOOP DISC
GRIT:120 Fine
QTY/PACK:15 Discs / Pack
|
TYPE 27 MASONRY/CONCRETE GRINDING WHEEL
Softer formulation for faster grinding -
in harder materials
3 full sheets of fiberglass for added -
durability and safety
C24R type abrasive grit
7/8" arbor
DWA4501C 4-1/2 IN. GRINDING WHEEL
SIZE:4-1/2" x 1/4"
|
GATOR BLADE METAL CUT-OFF BLADE
Use to cut, grind or sharpen almost anything
Gator Blade is for cutting metal
Fiberglass reinforced blade - Type 1
.045" thickness
5/8" arbor hole
For use with angle grinders
13,200 Max RPM
9611 4.5X.045X7/8 METAL WHEEL
SIZE:4-1/2" Diameter
|
TYPE 27 DEPRESED CENTER GRINDING WHEELS
Type 27 Metal - aluminum oxide grit and -
premium resin bond for professional results
For use on all types of ferrous metals
Fiberglass reinforced for safety and -
increased durability
A24R Spec.
For cutting and grinding applications
Size= wheel diameter / thickness
75545 4-1/2X1/4 MTLGRND WHEEL
SIZE:4-1/2" x 1/4"
ARBOR:5/8"-11
|
TYPE 27 DEPRESED CENTER GRINDING WHEELS
Type 27 Metal - aluminum oxide grit and -
premium resin bond for professional results
For use on all types of ferrous metals
Fiberglass reinforced for safety and -
increased durability
A24R Spec.
For cutting and grinding applications
Size= wheel diameter / thickness
75546 4-1/2X1/8 MTLGRND WHEEL
SIZE:4-1/2" x 1/8"
ARBOR:5/8"-11
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |