Self-Sealing Bathtub Overflow Cover Tool is a sanitary soultion to block outlet before plunging
Pack of 5 |
Tubing Cutters are used to cut Heating PEX and Heating PEX-AL-PEX tubing straight and burr-free. This basic tubing cutter is used to cut up to 1 in. diameter PEX and PEX-AL-PEX tubing. The all metal construction makes this basic tubing cutter superior to others constructed of plastic.
|
PEX POCKET CRIMPER
Crimps 3/8, 1/2 & 3/4" copper rings
Fits in your tool box
Meets ASTM F1807 Spec for crimping PEX
Includes tool, pouch, gauge & instructions
07100 PEX POCKET CRIMPER
|
SCREW-FEED TUBING CUTTER
Traditional style heavy-duty, mid-range cutter
Cuts & deburrs copper, aluminum & mild steel
Durable, epoxy powder-coated finish
Corrosion resistant for long life
35236 SCREW FEED TUBING CUTTER
SIZE:1-1/8"
|
SINK DRAIN WRENCH
For kitchen, bath & laundry use
Use on strainers, p-traps, wing nuts & tub drain
Also has a handy 3/8" square socket drive
03845 SINK DRAIN WRENCH
|
TUB DRAIN TOOL
Turn difficult, time consuming repair into aneasy "tap & removal"
Removes most stubborn "frozen" tub drains
Knurled teeth "bite" into the drain for a secure hold & removal
Use w/ 1/2" drive ratchet or wrench n Hardenedsteel for durability
Plated for corrosion resistance
05255 1.5 IN. TUB DRAIN TOOL
|
UNIVERSAL FAUCET NUT WRENCH
Fits metal lock nuts, coupling nuts, PVC locknuts, most metal & plastic toilet supply nuts
Accurately machined from a one-piece highquality aluminum locations - 1/4" tp 3/8" driveadapter included
03825 FAUCET NUT WRENCH
|
MINI TUBING CUTTER
Mini for confined areas on copper, aluminum &mild steel
Corrosion resistant, durable epoxy powder-coated finish
Large knurled knob & rollers for easy tightening
One-piece knob & screw
Heat-treated alloy steel cutting wheel
36000 1 IN. MINI TUBING CUTTER
SIZE:1"
|
SLEEVE PULLER
Truly rugged construction - arms resist flexingwhen placed under pressure
Bracket arms can adjust to fit both large& small faucet knobs & handles
03876 SLEEVE PULLER
|
MINI TUBING CUTTER
Mini for confined areas on copper, aluminum &mild steel
Corrosion resistant, durable epoxy powder-coated finish
Large knurled knob & rollers for easy tightening
One-piece knob & screw
Heat-treated alloy steel cutting wheel
35030 5/8 MINI TUBING CUTTER
SIZE:5/8"
|
RATCHETING PVC CUTTER
Value designed, one-hand cutter
Quick, clean cuts through the following;
Hose, plastic tubing, & PVC Sch40 pipe up to 1"
Cutting capacity to 1-5/16"
Die cast handles
Stainless steel blade
37110 ECON RATCHET PVC CUTTER
SIZE:1"
|
APOLLO ONE HAND PEX PINCH CLAMP FASTENING TOOL
Hardened steel construction ensures reliabilityand durability
Factory calibrated to ensure proper connectionsright out of the box
Contoured comfort grip handles
Tool disengages from pinch clamps only when acomplete & secure connection has been completed
Use w/ 3/8",1/2",3/4",1" SS pinch clamps
Use in tight spaces. Ratcheting design.
69PTBJ0010C PEX PINCH TOOL
SIZE:11.5"x8.5"x1.25"
COLOR:Black & Yellow
|
10" ELEMENT ANODE WRENCH
Allows for removal & replacement of both waterheater elements & anode rods
Dual hex heads
1-1/16" hex end fits all standard anode rods
1-1/2" hex end fits all standard screw-in waterheater elements
Measures 10" long
Constructed of durable zinc-plated steel
01-1655 10 IN. ELEM ANOD WRENCH
COLOR:Silver
|
FLAIR-IT EXPANDER TOOL
This tool is used to expand PEX pipe before the Flair-It fitting is inserted into the pipe
Works with both 1/2" and 3/4" PEX pipe
Helpful with installing all Flair-It fittings
Compatible with any brand or type of SDR-9 Pex Pipe - however this tool is only to be used with Flair-It Brand Fittings
18152 1/2-3/4 EXPANDER TOOL
|
Take advantage of the ATI Loop-Handle Cable Saw, made of Premium Stainless Steel Cable that will not rust. This is an economical and durable cable saw which is designed for cutting plastic piping (PVC, CPVC, ABS and other plastics). This handy saw is great for cutting in tight places or hard to reach areas. It comes packaged in a reusable pouch, for tangle free, easy storage, in your pocket or tool box making it a convenient tool on any job. This 48" cable saw will cut up to 8" Pipe and only needs 1/4" clearance.
|
TUB DRAIN REMOVER
Install/remove tub drains with/without crossbars
Tap for snug fit then turn w/wrench or screwdriver
Double ended to fit most tub drains
Durable cast construction
185 TUB DRAIN REMOVER
|
HEAVY DUTY TUBING CUTTER
Large capacity precision cast frame cutter
For heavy-duty & industrial applications
Twin hardened flare groove rollers
Double retractable tool steel reamer
Capacity: 1-/4" to 1-1/2" O.D.
125 HEAVY DUTY TUBING CUTTER
CAPACITY:1/4" - 1-1/2"
|
REPLACEMENT CUTTER WHEEL
Hardened alloy & tool-steel
Interchangeable with all General cutters
Cuts copper tubing
RW121/2 REPL CUTTER WHEEL
|
PEX RING REMOVAL TOOL
Fast and easy PEX crimp ring removal tool
Cuts PEX rings in seconds with no fitting damage - makes fitting reusable
Works on 1/2" to 1" PEX rings
Blow molded plastic comfort grips
69PTKD0009 CRMPRING REMOV TOOL
CAPACITY:1/2"-1"
|
MINI TUBING CUTTER
For copper, aluminum, brass, thin wall tubing1/8" to 7/8" capacity
Large beveled knob for greater torque
Hardened glared grooved rollers
Small swing radius at maximum working capacity
Use replacement wheel RW121/2
129X MINI TUBING CUTTER
CAPACITY:1/8"-7/8"
|
This item can NOT be shipped to these states CA
FAUCET SEAT WRENCH Six-step seat wrench 3 hex sizes one end 3 square sizes other end Hardened steel, bright-plated Carded T157 SIX-STEP SEAT WRENCH |
Take advantage of the ATI T-Handle Cable Saw, made of Premium Stainless Steel Cable that will not rust. This is an economical and durable cable saw which is designed for cutting plastic piping (PVC, CPVC, ABS and other plastics). This handy saw is great for cutting in tight places or hard to reach areas. It comes packaged in a reusable pouch, for tangle free, easy storage, in your pocket or tool box making it a convenient tool on any job. This 24" cable saw will cut up to 4" Pipe and only needs 1/4" clearance.
|
HEAVY DUTY ELEMENT WRENCH
Zinc plated element wrenches
Fits all screw-in elements & 1-1/2" nuts
Works with your screwdriver
Goes into offset where adjustable wrench can't
09943 4 IN. HVY DTY ELEMNT WRENCH
SIZE:4"
|
UNDERSINK DRAIN PLIERS
Fits all sink drain, slip trap & compression nuts
Also fits basin lock nuts
3-position slip joint works on 1-1/4, 1-1/2 & 2"
For 2" plastic & metal drains
Removable rubber jaws prevent damage
Jaws expand to 4"
Replaces jaw wrenches, slip nut & combowrenches
Corrosion resistant chrome-plated
189 UNDERSINK DRAIN PLIERS
|
RATCHING PIPE CUTTER
Use with PVC, CPVC, PEX, poly & vinyl tubing
Durable metal construction
Cuts up to 1-1/4" pipe
Ratcheting blade prevents blade from shifting on pipe
Spring loaded blade delivers quick & precise cut
Great for professional & do-it-yourselfers
Not for use with Schedule 80 PVC
69PTKC001 TUBING CUTTER
CAPACITY:up to 1-1/4"
|
LENOX TUBING CUTTER
Won't walk while cutting
Professional deburring
Will not damage cutting wheels
Change out wheels with only a screwdriver
Store extra cutting wheel in handle
21010TC118 TUBING CUTTER
CAPACITY:1/8 x 1-1/8"
|
Take advantage of the ATI Loop-Handle Cable Saw, made of Premium Stainless Steel Cable that will not rust. This is an economical and durable cable saw which is designed for cutting plastic piping (PVC, CPVC, ABS and other plastics). This handy saw is great for cutting in tight places or hard to reach areas. It comes packaged in a reusable pouch, for tangle free, easy storage, in your pocket or tool box making it a convenient tool on any job. This 24" cable saw will cut up to 4" Pipe and only needs 1/4" clearance.
|
|
PEX CINCH CLAMP FASTENING TOOL
Ratcheting action PEX clamp fastening tool
For fast and secure cinch clap installation
Ratchet clamp until PEX cinch clamp tool automatically releases to ensure cinch clamp is fully engaged
Always inspect & test before burying or normal use
Blow mold comfort grips
69PTKG1096 QUICKCINCH CLP TOOL
|
Take advantage of the ATI T-Handle Cable Saw, made of Premium Stainless Steel Cable that will not rust. This is an economical and durable cable saw which is designed for cutting plastic piping (PVC, CPVC, ABS and other plastics). This handy saw is great for cutting in tight places or hard to reach areas. It comes packaged in a reusable pouch, for tangle free, easy storage, in your pocket or tool box making it a convenient tool on any job. This 48" cable saw will cut up to 8" Pipe and only needs 1/4" clearance.
|
MIDGET TUBING CUTTER - GENERAL TOOLS
For use in hard-to-reach places
Small enough to use in appliances
Enclosed feed requires 1-1/4" clearance
Replaceable alloy steel cutter wheel
With two friction reducing steel rollers
Capacity: 1/8 - 5/8"
123R 5/8 IN. MICRO TUBING CUTTER
CAPACITY:1/8"-5/8"
|
FAUCET HANDLE PULLER
Standard faucet handle puller
Use for hard to remove faucet handles
Light duty
Carded
13-2701 HANDLE PULLER
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |