• 3901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro Coated Motor
  
• 4 Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Adjustable Switch
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

• Smooth double action
  
• Self primes and operates dry without damage
  
• Easy, smooth hands free operation
  
• Ease of installation- Multi-directional inlet and outlet hose connections
  
• 3 mounting options (including thru bulkhead)
  
• Left and right oriented foot lever versions available
  
• Also ideally used to prime Whale In-Line Booster pumps
  
• Pumps fresh and salt water 15 ltrs (4 US gals) per minute

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Single-Fixture 12 VDC
  
• Self-Priming
  
• Run Dry Capability
  
• 30 PSI Shut-Off Pressure
  
• Long Life Pressure Switch

• New Compact 3 chamber design for greater pumping efficiency
  
• includes Pumpgard Intake Strainer, Pressure Nozzle, Port Fittings and 25' of hose coil
  
• Corrosion resistant
  
• Sealed motor
  
• ISO 8846 MARINE (Ignition Protection Standards)

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Whisper quiet operation
  
• Five-chamber construction
  
• Smooth flowing
  
• Self-priming
  
• Easy, low cost maintenance
  
• Quick-connect hose
  
• Integrated pressure switch
  
• Long service life
  
• Connection: 1/2" NPT / hose 3/4". 3/4" GHT, Hose 3/4" GHT
  
• Bulkhead fitting - Inlet 3/4" hose, outlet 3/4" GHT

• Move more water and oxygen into livewell tanks to keep fish active
  
• Cooler-running motors, premium materials, watertight seals and waterproof wiring
  
• Cartridges are replaceable and interchangeable between bilge and aerator pumps

• Up to 14 ltrs (3.7 US gals) per minute
  
• Will run dry without damage and pump a mixture of air and water
  
• Specially designed to pump waste water
  
• Large single diaphragm
  
• Virtually non-choke valves
  
• No filter required
  
• Self-priming up to 3 m (10 ft)
  
• Easy to install in confined spaces
  
• Double outlet valve ensuring continuous flow
  
• Multi directional head
  
• Can be mounted almost anywhere
  
• Low power consumption

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Ideal where space is limited
  
• Angled spout and adjustable height provide various options for installation
  
• Extended spout makes for easy filling of containers
  
• Capacity 8 ltrs (2.2 US gals) per minute
  
• Narrow mounting base allows installation for use between two sinks
  
• Delivers a smooth flow on each stroke
  
• Useful as a back-up pump or for a simple freshwater supply pump
  
• Suitable for fresh water and saltwater

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Move more water and oxygen into livewell tanks to keep fish active
  
• Cooler-running motors, premium materials, watertight seals and waterproof wiring
  
• Cartridges are replaceable and interchangeable between bilge and aerator pumps

• Compact 3 chamber design for greater pumping efficiency
  
• Model 32605 includes Pumpgard Intake Strainer and Port Fittings
  
• Corrosion resistant
  
• Sealed motor
  
• ISO 8846 MARINE (Ignition Protection Standards)

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Whisper quiet operation
  
• Five-chamber construction
  
• Self-priming
  
• Easy, low cost maintenance
  
• Quick-connect hose or threaded connectors available
  
• Inline strainer and trigger nozzle included as standard
  
• Long service life
  
• Capacity:20 l/min - 5.2 GPM
  
• Pressure Cut Off: 5 bar - 70 psi
  
• Fuse Size: 20 A
  
• Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb,
  
• Motor: WD 5.2 - 185 W, 12/24V DC
  
• Body: PA/PPA
  
• Valves: Nitrile
  
• Diaphragm: Santoprene

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• 2901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro Coated Motor
  
• 4 Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Adjustable Switch
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

• New 6.0 GPM (22.7 lpm) product offering! Jabsco now offers a complete range of 3-7 GPM washdown pumps
  
• Sealed switch and co-injected molded diaphragm, eliminate leak paths, extending the life of the pumps by up to 50%
  
• Ergonomically designed spray nozzle, provides powerful and accurate fire power with every shot
  
• Jabsco's robust electric diaphragm pump design, proven with over 7 million units in service
  
• Quick Disconnect Ports, allow for ease of installation in hard to reach places
  
• PumpGard Strainer, prevents over 99% of the finest particles from clogging the pump
  
• Improved Noise Dampening Rubber Feet, significantly minimizes vibration when mounted against hard surfaces
  
• IPX6 rated

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Impeller: Jabsco Nitrile compound
  
• Macerator: Stainless Steel Cutter reduces particle size to 1/8" maximum. New 4 blade design
  
• Seal: Lip Type

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Smooth flow
  
• Dry running capability
  
• Soft noise absorbing mounts
  
• Snap-fit port fittings
  
• Built-in bypass - less pulsation
  
• Reduces need for accumulator tank
  
• Corrosion resistant materials
  
• CSA listed
  
• ISO 8846 MARINE (ignition protection)
  
• CE

WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Self-Priming
  
• Runs Dry Without Damage
  
• Smooth Flow
  
• Four Piston, Diaphragm Sealed
  
• Powerful Motor
  
• Snap-In Swivel Ports
  
• Meets USCG & ISO 8846 Ignition Protection Standards

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

SeaLand® T Series Waste Discharge Pump - 12V

For premium tank discharge performance, SeaLand T series pumps provides unsurpassed quality and reliability. Unlike impeller-type macerator pumps, the bellow-style T pump can run dry without threat of damage. Drawing only 6 amps at 12V DC.

In waters where overboard discharge of a waste holding tank is permitted, the T pump integrates with Dometic Tank Discharge (DTD) control systems* for completely automated holding tank discharge.

*Purchased separately

Features:

• Produces 300 gph (1136 lph) flow rate
• Runs dry without harm (prevents motor burn-up)
• Self-priming to 10 feet (3.3 m) of water
• Draws only 6 amps at 12V DC
• 1 year warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Mastercraft Ballast Pump - 12V

The Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together and your surfing and wakeboarding again.

Features:

• Same electrical connection as original OEM
• Same mounting as the OEM unit, no need to drill more holes
• The leader for flexible Impeller Ballast Pumps

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aqua Jet WPS 4.0 GPM 12V NPT - 2.8 Bar

Features:

• 5-chamber Aqua Jet WPS pumps provide a reliable "heart" for small boat and RV water pressure systems
• Lower noise and water pulsation
• 4.0 GPM Capacity

• Whisper quiet operation
  
• Five-chamber construction
  
• Self-priming
  
• Easy, low cost maintenance
  
• Quick-connect hose or threaded connectors available
  
• Inline strainer and trigger nozzle included as standard
  
• Long service life
  
• Capacity:13 l/min - 3.5 GPM
  
• Pressure Cut Off: 5 bar - 70 psi
  
• Fuse Size: 15 A
  
• Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb,
  
• Motor: WD 3.5 - 120 W, 12/24V DC
  
• Body: PA/PPA
  
• Valves: Nitrile
  
• Diaphragm: Santoprene

VFLO 5.0 GPM (19 LPM) Water Pressure Pumps

Flow rate: 19.0 Litres/min (5.0 gallons/min)

Self-priming from dry up to 3m (10ft)

• DiMOND technology provides consistent water pressure
• Up to 50% less power consumption
• Learns the boat's water pressure system to improve pump performance
  
  Universal Use (Metric or US Customary Units)
  
  42755-0092 - V-Flo 5.0 Water Pressure Pump Specifications
  
  Body Materials Glass Filled Polypropylene
  Diaphragm Santoprene
  Valves EPDM
  Port Type 1/2" (13mm) Hose barb or Thread
  Voltage 12/24 (Vdc)
  Motor Type Permanent magnet, double ball bearing armature. Electronic speed control built into rear endball.
  Flow Rate5 (gpm) 19 (lpm)
  Sensor Pressure 40 (psi) 2.75 (bar)
  Voltage 12 (Vdc)
  
  JABSCO's V-FLO variable flow, constant pressure water pumps now feature the revolutionary new DiMOND technology designed to automatically diagnose and monitor all aspects of your pump?s performance to prevent system failure.
  
  DiMOND incorporates 10 specific modules designed to Monitor, Protect and Prevent - allowing you to evaluate and respond to the problem before the pump or your boat are damaged. The DiMOND technology automatically runs diagnostics to detect common failures such as run dry,plumbing leaks, over current, under current, low voltage and over voltage. If the diagnostic discovers a problem, the pump will stop, identify the root cause, and provide the data you need to solve the problem.
  
  V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow neededto perform a variety of onboard delivery tasks. Since the pump is constantly monitoring water flow and electrical current, it automatically adjusts itself as needed, ensuring that your systems are operating at peak efficiency.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Sealed switch and co-injected molded diaphragm, eliminates leak paths, extending the life of the pumps by up to 50%
  
• Jabsco's robust electric diaphragm pump design, proven with over 7 million units in service
  
• Automatic pressure switch, tested over 4 millions cycles without failure
  
• Quick disconnect ports, allow for ease of installation in hard to reach places
  
• Improved noise dampening rubber feet, significantly minimize vibration when mounted against hard surfaces
  
• IPX6 rated

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• 5901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro
  
• Coated Motor
  
• Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Adjustable Switch & By-Pass
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

• Connections: for 13mm (1/2") bore hose or Hep20 push-fit connectors CW193
  
• Dimensions: 220mm long, 105mm wide, 113mm high
  
• Fuse Size: 15 amp
  
• Output: 13 litres/minute (2.9 gallons/minute) open flow
  
• Weight: 2.5(kgs)
  
• PRESSURE SWITCH - cuts in at 1.4bar (20psi) - cuts out at 2.8bar (40psi)
  
• Efficient, high-flow, self-priming pump serving 4 or more outlets
  
• Multi-diaphragm design self primes to 1.5m vertical lift, can run dry without damage
  
• Supplied with snap-in ports for hose or Hep20 connectors
  
• Quiet running
  
• Motor protected by automatic thermal overload cut-out

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

PAR-Max 4

WaterPressure System Pump

The PAR-MAX Automatic Water System Pump is designed for self-contained boats and RV’s with multiple fixture water systems. The system operates automatically. When a fixture is opened, the pump instantly begins operation to provide a smooth constant flow from tank to faucet. Closing the faucet automatically discontinues pump operation.

FEATURES

• Self-Priming to 10 ft. (3 m)
• Runs Dry Without Damage
• Smooth Flow
• Four Piston, Diaphragm Pump
• Powerful Motor with Thermal Overload Protection
• Snap-in Ports
• Pressure Switch with Rubber Boot
• Meets USCG Regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection)
• Meets EN 50081-1 Electro-magnetic Compatibility

SPECIFICATIONS

• Pump Body – Glass Filled Polypropylene
• Pump Design – Multi-Chamber Diaphragm
• Suction Lift – Self Priming to 10 ft. (3 m)
• Ports – 1/2" (13 mm) Hose & 1/2" (13 mm) Threaded (QEST Type)
• Motor – Permanent Magnet
• GPM-LPM - 4.3/16.3
• Volts - 12v
• Nominal Cut-In - 10 psi
• Nominal Cut-Out - 25 psi
• Amp Draw @ 10 psi - 6 amp
• Fuse/Breaker - 10 Amp
• Shipping Weight –  6.0 lb (2.8 kg) 31620-Series

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Smooth flow
  
• Dry running capability
  
• Soft noise absorbing mounts
  
• Snap-fit port fittings
  
• Built-in bypass - less pulsation
  
• Reduces need for accumulator tank
  
• Corrosion resistant materials
  
• CSA listed
  
• ISO 8846 MARINE (ignition protection)
  
• CE

WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Sealed switch and co-injected molded diaphragm, eliminate leak paths, extending the life of the pumps by up to 50%
  
• Ergonomically designed spray nozzle, provides powerful and accurate fire power with every shot
  
• Jabsco's robust electric diaphragm pump design, proven with over 7 million units in service
  
• Quick Disconnect Ports, allow for ease of installation in hard to reach places
  
• PumpGard Strainer, prevents over 99% of the finest particles from clogging the pump
  
• Improved Noise Dampening Rubber Feet, significantly minimizes vibration when mounted against hard surfaces
  
• IPX6 rated

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.