Shut-off valve operates below the frost line. Hydrant cannot freeze because when it is closed, all water in the stand pipe drains out of a hole in the valve which is set in the ground below the frost line. Pistol type handle. Hand wheel designed to lock t
he flow of water at rate desired. Solid brass rod through brass packing nut will not rust and cut into rubber O-rings. Solid brass links and connector. 1 piece molded Buna 'N plunger can be easily adjusted or replaced without removing hydrant.
LEAD FREE
Not available in california and Louisiana
Bury Depth Ft.=4OA Length=78-1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| Double Check Valve Type with Atmospheric Vent | Especially Made For Use On Laboratory Faucets with Gooseneck Spout | Size 3/8" Npt
|
WATER TEST GAUGE
Use to test water pressure to check for leaks
0-300 psi gauge with 3/4" hose threads
Carded
13-1901 WATER TEST GAUGE
|
FINE THREAD SELF-DRAINING BACKFLOW PREVENTER
Backflow preventer is self draining vacuum -
breaker with fine thread
Replacement part for Arrowhead brand -
490BPF and 480 Series
Fine thread on female end, garden hose -
thread on male end
051771 SELFDRN BKFLO PREVENTER
|
Installs easily between standard shower arm and head. Push button control easily adjusts spray force from full to a trickle, great for saving while lathering, shampooing, etc. Made in USA
Finish=Chrome
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
HOSEBIB LOCK-KEYED ALIKE}Fits all 3/4" hose bibs|No tools required
|
FLIP-UP DRAIN EMITTER
Directs water flow to appropriate areas
Flapper design won't get stuck in open position
Install in horizontal or vertical configuration
Adjust height to accommodate special needs
Extend with standard 3" sewer & drain pipe
Fits 3"-4" corrugated pipe, 4" PVC pipe
3"-4" polyethylene sewer & drain pipe
TT-155 FLIP-UP DRAIN EMMITTER
|
GAS TEST GAUGE
Plumbing tool used to check for leaks
3/4" female pipe thread x air valve fitting
Gauge reads to 30 psi
Carded
13-1903 GAS TEST GAUGE
|
RV WATER PRESSURE REGULATOR
Stop damage to your RV water hose, pump -
or internal lines from inconsistent water -
pressure in campgrounds
Reduces water pressure to a safe consistent-
40-50 PSI operational pressure
Brass hose is 2010 compliant
Helps prolong equipment life
Carded
40055 BRS WATER PRES REGULATOR
|
REINFORCED NYLON MALE ADAPTER
Glass fiber reinforced nylon
Barb fitting inlet & outlet with captive -
blue nut
Max 230 PSI & 140 degree Fahrenheit
Use with ID sized Polyethelene pipe, clear & -
braided vinyl, garden & washdown hose
88005256 1/2 X 1 MALE ADAPTER
SIZE:1/2" x 1"
COLOR:Blue/Black
|
REINFORCED NYLON MALE ADAPTER
Glass fiber reinforced nylon
Barb fitting inlet & outlet with captive -
blue nut
Max 230 PSI & 140 degree Fahrenheit
Use with ID sized Polyethelene pipe, clear & -
braided vinyl, garden & washdown hose
88005253 1 X 1 MALE ADAPTER
SIZE:1" x 1"
COLOR:Blue/Black
|
REINFORCED NYLON FEMALE ADAPTER
Glass fiber reinforced nylon
Barb fittin inlet & outlet with Captive -
Blue nut
Max 230 PSI & 140 degree Fahrenheit
Use with ID sized Polyethelene pipe, clear & -
braided vinyl, garden & washdown hose
88005259 3/4X3/4 FML ADAPTER
SIZE:3/4" x 3/4"
COLOR:Blue/Black
|
DIFFENTIAL FLOAT TANK VALVE
Diaphragm style design
Full flow performance
East to service
Color: Black & Blue
88005647 3/4 WATER TANK VALVE
SIZE:3/4"
SERIES:RA
|
IN LINE AIR FLOW REGULATOR
Used to control air flow from full flow to -
complete shutoff
1/4" female NPT to 1/4" male NPT
0-160 PSI pressure gauge (1/8"-27 male NPT)
6-5492 AIR FLOW REGULATOR
|
REINFORCED NYLON CHECK VALVE
Glass fiber reinforced nylon
Install at any angle
Full flow performance
Use with ID sized Polyethelene pipe, clear & -
braided vinyl, garden & washdown hose
88005312 2 IN NPT CK VALVE
SIZE:2"
COLOR:Blue/Black
|
TRU-FLATE AT HAND REGULATOR
Allows custom pressure settings for various -
tools and applications
To set desired pressure, turn the regulator up -
to the max 140 PSI and adjust downward to the -
required pressure each time you change setting
Adjusts while in use - no need to stop working
Inlet & outlet ports: 1/4" FNPT
Operating outlet pressure: 40-140 PSI
41145 IN LINE REGULATOR
COLOR:Black
|
KRYLON FARM & IMPLEMENT PINT REDUCER
Formulated to reduce Krylon(R) Farm & -
Implement paint and primer enamels to the -
optimum spray consistency while maintaining -
VOC compliance for all VOC regulated areas -
of the USA.
2045 PINT REDUCER
SIZE:Pint
|
REINFORCED NYLON FOOT VALVE
Glass fiber reinforced nylon
Install at any angle
Full flow performance
Use with ID sized Polyethelene pipe, clear & -
braided vinyl, garden & washdown hose
88005304 1 NPT FOOT VALVE
SIZE:1"
COLOR:Black
|
| Designed for the protection of the potable water supply in accordance with national plumbing codes | For low hazard cross connections and continuous pressure applications | Can be installed horizontally or vertically | Ball type testcocks | Quarter-turn, full port, resilient seated, bronze ball valve shut-offs | Supply pressure to 175 psi | Water temperature 180´M,6[Deg]ªF | Tested and certified under the following standards for double check valve assemblies: ASSE #1015, AWWA #C506 | Designed and complies with FCCCHR of USC manual, section 10, lAPMO listed
|
| Reduces high inlet pressure to a lower outlet pressure | Spring range 25 to 75 psi factory set at 50 psi | Pressure rated 300 psi, max. temp. 180° | Bronze body | Built in by-pass | Stainless steel strainer | Nylon reinforced Buna-N diaphragm | Balanced piston design, may be installed in any position | All internal parts corrosion resistant | Serviceable in-line | MIP inlet x threaded union outlet | Listed ASSE-1003, city of Los Angeles | LEAD FREE
|
| Reduces high inlet pressure to a lower outlet pressure | Spring range 25 to 75 psi factory set at 50 psi | Pressure rated 300 psi, max. temp. 180° | Bronze body | Built in by-pass | Stainless steel strainer | Nylon reinforced Buna-N diaphragm | Balanced piston design, may be installed in any position | All internal parts corrosion resistant | Serviceable in-line | MIP inlet x threaded union outlet | Listed ASSE-1003, city of Los Angeles | LEAD FREE
|
| Suitable for residential commercial industrial irrigation marine and fire protection applications | Prevents the reverse flow of water gases or other substances into the distribution system of the potable water supply | Pressure differential relief valve between two independent spring-loaded "Y" type center guided check valves complete with two full port ball valves and four ball valve test cocks | Noryl replaceable seats and silicone rubber check discs | Entire unit serviceable in-line | Temperature range 33°F to 180°F | Maximum pressure 175 psi | Listed ASSE 1013" AWWA
|
| Suitable for residential commercial industrial irrigation marine and fire protection applications | Prevents the reverse flow of water gases or other substances into the distribution system of the potable water supply | Pressure differential relief valve between two independent spring-loaded "Y" type center guided check valves complete with two full port ball valves and four ball valve test cocks | Noryl replaceable seats and silicone rubber check discs | Entire unit serviceable in-line | Temperature range 33°F to 180°F | Maximum pressure 175 psi | Listed ASSE 1013" AWWA
|
| Suitable For Supply Pressure To 400PSI | Factory Set At 50PSI, Adjustable From 15 To 75PSI | Maximum Temp 140°F @ 100PSI | Integral Stainless Strainer | Built In Bypass | May Be Installed In Any Position | Model NR3XLDULU | Lead Free
|
| Suitable For Supply Pressure To 400PSI | Factory Set At 50PSI, Adjustable From 15 To 75PSI | Maximum Temp 140°F @ 100PSI | Integral Stainless Strainer | Built In Bypass | May Be Installed In Any Position |Compliant for Lead Free legislation | Model NR3XL | Lead Free
|
| Adjustment Range 10-25 Lbs. Set At 15PSI | Features High Capacity Performance | Max. Temp. 212°F, Max. Pressure 100PSI | Heavy Constructed Iron Body | Unique Simplified Servicing Accessibility
|
| Combination Backflow Preventer (#261023) and Feed Water Pressure Regulator #484001 (#1156F) In One, Pre-Assembled Unit
|
| Designed for protection of the potable water supply in accordance with national plumbing codes and water utilities authority requirements | For high hazard cross connections in plumbing systems of containment at the service entrance | Ball type testcocks | Two in-line, independent check valves with an intermediate relief valve | Quarter-turn, full port, resilient seated, bronze ball valve shut-offs and renewable seats | Supply pressure to 175 psi | Water temperature to 180°F | Tested and certified for ASSE #1013; AWWA #C506; designed and complies with FCCCHR of USC manual, section #10, lAPMO listed
|
| 1/4" IPS | 2" Face
|
| Continuous Pressure Type with Atmospheric Vent For Exposed Serviceable Installations
|
| Continuous pressure type backflow preventer with threaded atmospheric vent drain | Consists of 2 independently operated spring-loaded check valves with intermediate atmospheric vent | Bronze body construction | Integral stainless steel screen, corrosion resistant internal parts | Temperature range 33°F - 210°F, maximum pressure 175 psi
|
| Suitable for residential commercial industrial irrigation marine and fire protection applications | Prevents the reverse flow of water gases or other substances into the distribution system of the potable water supply | Pressure differential relief valve between two independent spring-loaded "Y" type center guided check valves complete with two full port ball valves and four ball valve test cocks | Noryl replaceable seats and silicone rubber check discs | Entire unit serviceable in-line | Temperature range 33°F to 180°F | Maximum pressure 175 psi | Listed ASSE 1013" AWWA |Compliant for Lead Free legislation
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |