• Intermittent duty
  
• Self-primes up to 2.4m vertical lift
  
• Four-piston design delivers higher flow rates
  
• Quick-connect plug-in ports for easy installation
  
• Pressure-switch control to run the pump only as needed

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Move more water and oxygen into livewell tanks to keep fish active
  
• Cooler-running motors, premium materials, watertight seals and waterproof wiring
  
• Cartridges are replaceable and interchangeable between bilge and aerator pumps

• 2901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro Coated Motor
  
• 4 Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Adjustable Switch
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

DB Link BF106 Gold Barrel Connectors, 2 pk (Female/Female)

Shower Drain Box with 1100 GPH Pump - 12V

This compact, full-capacity shower drain system provides 1100 GPH (4164 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

Shower Drain Box with 1100 GPH Pump - 24V

This compact, full-capacity shower drain system provides 1100 GPH (4164 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

• Self-Priming
  
• Runs Dry Without Damage
  
• Smooth Flow
  
• Four Piston, Diaphragm Sealed
  
• Powerful Motor
  
• Snap-In Swivel Ports
  
• Meets USCG & ISO 8846 Ignition Protection Standards

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Ideal where space is limited
  
• Angled spout and adjustable height provide various options for installation
  
• Extended spout makes for easy filling of containers
  
• Capacity 8 ltrs (2.2 US gals) per minute
  
• Narrow mounting base allows installation for use between two sinks
  
• Delivers a smooth flow on each stroke
  
• Useful as a back-up pump or for a simple freshwater supply pump
  
• Suitable for fresh water and saltwater

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Ideal for installing between two sinks- swivelling outlet
  
• Fine flow control
  
• Easy operation - Light back & forth pump action
  
• Suitable for fresh water and saltwater
  
• 7 ltrs capacity (1.85 US gals) per minute

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shower Drain Box with 800 GPH Pump - 12V

This compact, full-capacity shower drain system provides 800 GPH (3028 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

Shower Drain Box with 800 GPH Pump - 24V

This compact, full-capacity shower drain system provides 800 GPH (3028 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• 4901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro
  
• Coated Motor
  
• Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Adjustable Switch & By-Pass
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

• Flexible installation
  
• No filter required
  
• Compact and simple design
  
• Dry running capability
  
• Connections for 38mm (1 1/2") ports
  
• Up to 19 lpm (5 US gpm) flow
  
• Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition
• Protection ISO 8849 MARINE Bilge Pump Standard
  
• Built to ISO 15083 Specification
  
• Meets BSEN 50081 (Electro Magnetic Compatibility)

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Ballast King Bronze DC Pump without Switch - 15 GPM

Wakeboard and Ski Boat Ballast Pump

Features:

• Flow rate: 15 US gallons/min (57 Litres/min)
• Self-priming from dry up to 1.2m (4ft)
• Adds approx 125lbs (56kgs) of ballast per minute
• Reversible to both fill and empty tanks
• Simple design means fewer wearing parts.
• ISO 8846 MARINE (Ignition protection).

Applications:

The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.

 Specifications:

• Body Materials: Bronze
• Impeller: Jabsco Neoprene compound
• Seal: Lip Type
• Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb 
• Voltage: 12 (Vdc)
• Amp Draw: 19 (amp)
• Fuse Size: 25 (amp)
• Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible 
• Duty Cycle: 30 Minutes Max
• Dimensions: 3 5/8 x 8 x 4 3/4 (inches)

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Low Pressure Cyclone Centrifugal Pump - 12V

Silent running. Single tool servicing. 2m (6 foot) suction lift when wet.

A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.

Features:

• Heavy duty robust design
• Stainless steel construction
• Long life DC motor
• Silent running
• Anti-clog impeller design
• Long life mechanical seal
• Single tool servicing 

Specifications:

• Pump Body: Stainless Steel
• Port Size: 3/4" pipe threads, available with NPTF threads
• Flow: 110 Liters/Minute (29.7 gallons/min.)
• Pressure: Up to 0.6 bar (8.7psi)
• Impeller: Stainless Steel Anti-Clog Impeller Design
• Shaft Seal: Mechanical
• Maximum Current: 9 Amp
• Fuse Size: 10 Amp
• Motor: Continuously rated
• Motor life 3500 hours
• ISO 8846 Marine and USCG Regulations for Ignition Protection
• ISO 8849 Marine Bilge Pump Standard

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Length: 16" (40.6cm)
  
• Diameter: 1-1/2" (38mm)
  
• Pumps: 10 oz./stroke
  
• Two intake tubes:
  
  • 36" (91.4cm) long x 1/2' (13mm)
    
  • 1/4" (7mm) x 36" (91.4cm) w/adptr
  
  
• Flexible hose for water discharge:
  
  • 1-1/4" (45mm) x 24" (61cm)
  
  
• Red discharge tube for oil:
  
  1-1/4" (45mm) x 10" (25mm)

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mastercraft Ballast Pump - 12V

The Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together and your surfing and wakeboarding again.

Features:

• Same electrical connection as original OEM
• Same mounting as the OEM unit, no need to drill more holes
• The leader for flexible Impeller Ballast Pumps

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Tough Nylon Construction
  
• Patented Water Cooled Motor
  
• Extended Motor Life
  
• 6' Tinned Wire
  
• Washdown Port
  
• Submersible
  
• Anti-Airlock
  
• ISO 8846/8849
  
• 2 Year Warranty
  
• CE Listed

• 5901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro
  
• Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

• 4901 Replacement
  
• Sealed Switch
  
• Sealed Motor
  
• Corrosion Resistant Electro
  
• Coated Motor
  
• Independent Chambers
  
• Built-In Check Valve
  
• Co-Molded Diaphragm
  
• Self-Priming up to 6 Feet
  
• Dry Run Capability
  
• Thermally Protected
  
• Ignition Protected, CE

Sliding Ceramic Plate Valve

• Two ceramic disk plates that slide on each other. Ultra strong ceramics insure reliability and long life, as well as water flow from a trickle to a steady stream.
  UL Approved
  
• Stringent toxicity, performance, and life testing.
  Simple Installation
  
• Complete with mounting hardware. Only 1 hole necessary for mounting
  360° Rotation in 3 directions
  
• Rotating spout allows a variety of uses. Cold only. Hot/Cold does not rotate down.
  Multiple Installation Possibilities
  
• Use with or without an electric pump. Mounts in any position.
  High Operating Temperatures
  
• Up to 176°F (80° C)
  High Operating Pressures
  
• Up to 87 PSI (6 Bar)
  Rugged ABS Plastic Design
  
• Built to withstand the real world
  Easy Operation
  
• "Twist-Of-The-Wrist" switch and valve operation
  Smooth Futuristic Design
  
• Sleek design