The basic function of a pan is to prevent water damage.

The PanStand is much more.

1. The rugged construction does not crack, bend, or break, during routine maintenance.
   • A six gallon reservoir provides superior protection in low risk installations.
   • PanStand can be secured to floor or wall and connected to conventional (80 gph) PVC gravity drain.
   • 200 gph sensor activated pump drains into the washer standpipe using patented crescent adaptor. This greatly reduces construction costs.
2. PanStand reduces maintenance time, manpower requirements, worker injury and floor damage.
   • Eliminates the need to lift any machine out of the pan, or off the pedestal.
   • Air-flotation lifts pan and washer, dryer, or stack on a cushion of air using ordinary shop vac.
   • When secured to the floor or wall, equipment slides on and off to elevated rails.
3. The Sensor Activated Pump Reduces construction costs, particularly in renovation and re-use projects.
   • Eliminates separate condensate drain.
   • Occupies less floor space and will fit in 25" x 25" closet.
   • Lessens the space needed for servicing.
   • Allows more efficient use of space.
4. The laundry room is often the dirtiest room in the home.
   • PanStand's flat outer edge prevents dirt build up under the washer.
   • Machines set precisely on top with little exposed surfaces.
   • Vertical sides allow easy cleaning of floor beside the equipment.
5. Life cycle costs are reduced.
   • Rugged construction.
   • Universal design works with any brand of style equipment.
   • Can be used with top or front-load washers and vented or ventless dryers.

• PanStand combine a 5" Pedestal with a high capcity washer safety pan.
• Constructed on Non-conductive, non-staining, high impact, recycle polypropylene in Textured Black Finish with Air-flotation
• The 4 +" deep reservoir contains up to 6 gallons of liquid.
• Specifically designed for 24" laundry product.
• PanStand Air-flotation works with separates or stacked laundry systems up to 400lbs.
• Reduces noise and vibration movement
• Appliances sit on the side rails and not in a pan eliminating lifting the appliance
• Takes up less space than ordinary washer safety pans.
• Two simple installation options Air-flotation or Permanent
• Made in the USA

Sensor activated pump kit contains 120v/6OHz 35w Pump, 7 ft. Line Cord with 3 prong plug

6 ft. Hose with5/8" Pump Connection and Exclusive Crescent Adapter

Pump Dimensions 4"H x 5"W x 2 3/4"D

Pump is installed in the rear of the PanStand. Attach the 5/8" connection to the pump

The crescent adapter wraps around the washer discharge hose eliminating installing a separate drain line

Permanent Installation
If connecting to a PVC drain it is recommended to installing permanently using 4 self drilling screws (such as drywall screws) through the bosses on the inside corners of the reservoir area angling them slightly towards the corner. Sturdy construction of the PanStand allows one man to hand truck the appliance on to the side rails without damage to the PanStand.

Activating Air-Flotation Feature
Air-flotation feature is activated by removing the plug from the 11/4" front access hole and connecting the hose to blower output on the shop-vac and inserting into the access hole.

PanStand works with all major brands of 24" laundry. The Air-flotation feature allows a countertop to be installed 1/2" above the appliance. The 5" height and air flotation allows easy flotation in and out of tight installations.