Ice Chest Aerator Kit
Converts any good sized ice chest (Esky) into your own portable live bait tank. The Ice Chest Aerator will keepyour live bait alive, or catch fresh, even during the heat of the day. Includes a sturdy First Mate pump, hose, spraybar, press on clamp, battery clamps and clear-cut instructions. Since there are no holes to drill the chest canalways be returned to its original purpose |
Impeller Removal Tool
1-9/16" to 2-9/16" (40mm - 65mm) Features:
|
Stainless Impeller Puller - Large Investment Cast 316 Stainless Steel.
|
Compact Impeller Removal Tool up to 2-1/4" Features:
|
Impeller Removal Tool
2-9/16" to 4-5/8" (65mm - 118mm) Features:
|
Aerator Head
Overall length 12-3/4", 3/4" thru-hull, one shut off valve Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications. |
Aerator Head One Shut Off Valve |
Grey Waste Tanks with Intelligent Control Robust compact tanks with multi-port options to suit your installation. Whale’s Largest Range of Multi-Port Grey Waste Tanks Ever! Simple system - Allows you to manage all grey waste on board through one thru-hull fitting.
|
Stainless Impeller Puller - Small Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump. Available in 2 sizes. |
Aerator Head
Overall length 6-3/4", 3/4" thru-hull, shut off valve Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications. |
Aerator Head - 9" Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications. |
Aerator Head - 14-1/2" Overall length 14-1/2", 3/4" thru hull one end, two shut-off valves, with mounting brackets, open tee with 3/4" barb. |
Aerator Head - 9" Overall Length Spray head assemblies can be custom made to required fit, size and flow capacity. |
Aerator Head - 9-3/4" Spray Bar with Shut Off Valve Overall length 9-3/4", 3/4" thru-hull, one shut off valve Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications. |
The SeaSense Bilge Pump Plumbing Kit is a complete kit. The bilge pump kit includes a plastic bilge hose, plastic thru-hull fitting and two stainless steel clamps. This bilge pump is intended for use above waterline only and the size is 1 1/8 inch in diameter and 6 feet long.
|
This item can NOT be shipped to these states CA
4" DEEP WELL JET KIT Cast iron 4" double pipe injector kit Fits Flotec models FP4332, FP4322 and FP4312 Includes all interchangeable nozzles For depths over 25 ft. and up to 110 ft. Mounts at 5 ft. off bottom of well Complete installation instructions FP4800P2 4 IN. DEEP WELL JET KIT |
12023006 2 IN. X100 FT. SUCT HOSE
|
Aerator Head
Overall length 10-1/2", 3/4" barb, shut off valve w/bracket Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications. |
Stainless Steel Quick-Release Hose Deck Mount Fitting & Hose Adapter Stainless Steel Deck Mount Fitting, 1/2" NPT Female Inlet, 3/4" GHT Male Hose Adapter. The Quick Release Connector provides the perfect installation solution for your HoseCoil washdown or garden style hose. The Quick Release installs easily on your boat and allows you to stow your hose out of the way. Never trip on a hose again! This clever design will allow you to flush mount the Quick Release into your cockpit or bulkhead.
|
AquaT Conversion Kit - 12V
Converts manual toilets to electric toilets 12V |
This item can NOT be shipped to these states CA
SHALLOW WELL JET KIT Converts FP4300 series deep well Jet Pump - for shallow well applications up to 25 ft. Corrosion-resistant clamp-on jet kit FP4875P2 SHALLOW WELL JET KIT |
This item can NOT be shipped to these states CA
DRILL PUMP & HOSE KIT Pumps to 216 GPH Attaches to min. 1,200 RPM electric drill Ideal for emergency pumping Drains aquariums & waterbeds Includes 30" hose & connections Also includes oil changing kit FPDMP21HCP2 DRLPUMP OILCHG KIT |
This item can NOT be shipped to these states CA
4" DEEP WELL JET KIT Cast iron 4" double pipe injector kit Fits Flotec models FP4332, FP4322 and FP4312 Includes all interchangeable nozzles For depths over 25 ft. and up to 110 ft. Mounts at 5 ft. off bottom of well Complete installation instructions FP4800P2 4 IN. DEEP WELL JET KIT |
This item can NOT be shipped to these states CA
3-WIRE SUBMERSIBLE CABLE 12 gauge wire - 150 ft. length 3-wire kit with ground Special water well jacket Includes connectors For deep well submersible pumps FP86P2 150 FT. 3-WIRE WELL WIRE |
#12 weight one quart bottles of Black Gold Vacuum Pump Oil. Black Gold Vacuum Pump Oil is the gold standard in vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed, meaning it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. In extreme temperatures, the oil will be more resistant to contaminants. We still recommend, however, that the oil be changed after every evacuation for maximum performance and pump efficiency.
|
Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed.
GAUZE 60.
Pipe Lgth. Ins.=30
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This item can NOT be shipped to these states CA
SEWAGE BASIN COVER Made of heavy-duty composite material Fits FPW 73-15 sewage basin Includes seal kit PW198-3 FPW7317P2 SEWAGE BASIN CVR KIT DESC:Basin Cover |
For transferring from one container to another, or draining oils and other fluids. Hand-operated, self-priming. For farm, home, automotive, and factory use. Heavy-duty steel construction with durable Viton o-rings. 8' vinyl hose (0.50"ID x 0.63"OD) to han
dle up to 90-wt. fluids. Features a double check valve. 1-gallon/8 strokes.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
| Boiler drain | Pressure gauge | Pressure switch PS02-3050 | Nipple | Relief valve | Lead free
|
| Long pattern | Not approved for LP gas
|
| Accommodates the fluid sensor for the Pro Series sump pump systems | Runs the pumps longer...for more hours per charge | Remain viable for more years in standby operation | Compatible with all PHCC Pro Series backup products | Battery is empty-sealed dry
|
4" submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging
impellers and provides full flow performance without the risk of corrosion.
230V - 12 GPM
H.P. =1/2
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |