Antenna to radio adapter cable for select 2002-Up Chrysler Dodge Ford and Jeep Vehicles. Snap-lock to aftermarket radio. The Metra 40-CR10 adapter lets you connect an aftermarket receiver to the factory antenna cable. It offers a male Motorola plug on one end and a snap-lock female antenna jack on the other.

Feature:

• To Chrysler factory antenna with snap-lock to aftermarket radio
• Used for Am and FM reception when replacing the OEM radio
• Fits into factory plug
• Adapter is 7-in. in length

The 36-inch Hot Rod CB Antenna is rated at 100-watts and made in the USA. 3|8 inch - 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long-lasting antenna.

Feature:

• 36-inch overall length 100-watts rated
• Traditional sleek style that reduces wind drag load
• Black double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

A universal design works with all satellite radio services and has a double sided adhesive pad for mounting and a 21 foot cable. Frequency: 2320.0 to 2345.0MHz. Satellite Gain: 5dB ice Typical. Terrestrial Gain: -1dB ice Typical. Noise Figure: 1.0dB Max. Current consumption: 45mA Typical/55ma maximum. Supply voltage: 4.7 Volts Typical. Operating temperature: -40¦F to 220¦F.

Feature:

• Universal Design Works with All Satellite Radio Services
• Double Sided Adhesive Pad for Mounting
• 21' Cable (174 Cable)
• Frequency: 2320.0 to 2345.0MHz
• Satellite Gain: 5dB ic Typical
• Terrestrial Gain: -1dB ic Typical
• Noise Figure: 1.0dB Max
• Current Consumption: 45mA Typical/55ma Maximum
• Supply Voltage: 4.7 Volts Typical

This open helical coil antenna gives wide bandwidth from 26MHz to 30MHz and efficient cooling. The tunable 48 inch tapered stainless steel whip with anodized aluminum construction is lightweight and corrosion resistant. Great SWR match and tuning outside of normal CB bands. Chrome plated brass ferrules and stainless steel stud for strong mounting.

Feature:

• Open helical coil gives wide bandwidth (26 to 30MHz) and efficient cooling
• Tunable 0.200 inch x 48 inch tapered stainless steel whip
• Great SWR match and tuning outside of normal CB bands
• Anodized aluminum construction light-weight corrosion resistant
• Chrome Plated Brass Ferrules and Stainless Steel Stud for Strong Mounting

12-Volt Plug adapter fits into your 12V power port with a convenient swivel plug. It features a USB port that powers or charges electronic devices two ports to power 12-Volt accessories at the same time and a LED power indicator.

Feature:

• 12-Volt plug adapter with swivel plug
• LED power indicator
• USB port powers and charges electronic devices
• Heavy-duty ABS construction
• LED Power Indicator
• Heavy Duty ABS Construction
• Power Two 12-Volt Accessories and 1 USB Device at the Same Time
• All Powered Devices should Not Exceed 10 Amps

The 48-inch Hot Rod CB Antenna is rated at 150-watts and made in the USA. 3|8 inch x 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long lasting antenna.

Feature:

• 48-inches in overall length 150-watts rated
• Traditional sleek style that reduces wind drag load
• Orange double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

Energizer FM transmitter streams music & calls via your Bluetooth devices. Play your music from your SD/MMC card & USB flash drive streams wirelessly via 3.5mm auxiliary input. Universal USB charging ports allows you to charge your devices and plug in your USB flash drives. Allows you to answer and end your calls via Bluetooth hands-free.

Feature:

• FM Transmitter Streams Music & Calls Via Your Bluetooth Devices
• Plays Your Music from Your SD/MMC Card & USB Flash Drive
• Streams Wirelessly via 3.5mm Auxiliary Input
• Universal USB Charging Ports
• Allows You to Charge Your Devices and Plug In Your USB Flash Drives
• Hands-Free Allows You to Answer and End Your Calls via Bluetooth

The 36-inch Hot Rod CB Antenna is rated at 100-watts and made in the USA. 3|8 inch - 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long-lasting antenna.

Feature:

• 36-inch overall length 100-watts rated
• Traditional sleek style that reduces wind drag load
• White double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

Universal locking top mount antenna for 1in. |25mm| hole for select 1978 to 1996 Mazda vehicles features a 37in. |94cm| 4 section retractable mast and 48in. |122cm| cable. Requires 9.50in. |23cm| under fender.

Feature:

• Universal Locking Top Mount for 1 .in (25mm) Hole
• 37 .in (94cm) 4-Section Retractable Mast
• 48 .in (122cm) Cable
• Requires 9-1/2 .in (23cm) Under Fender

Antenna to Radio Adapter Cable for select 2002 and up Chrysler Dodge Ford and Jeep vehicles with snap lock factory antennas allows you to install an aftermarket radio and connect to the factory installed antenna.

Feature:

• Antenna Adapter for Select 2002-Up Chrysler Vehicles

The 36-inch Hot Rod CB Antenna is rated at 100-watts and made in the USA. 3|8 inch - 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long-lasting antenna.

Feature:

• 36-inches in overall length 100-watts rated
• Traditional sleek style that reduces wind drag load
• Orange double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

This 3-foot top-loaded coil 2500-watt replacement whip antenna has a black fade-resistant polyethylene jacket and heavy-duty 16-gauge wire. It handles up to 2500 watts and has a frequency range of 26MHz-30MHz. Also featuring a weather-band ready tunable PowerPlus tip and non-corrosive chrome-plated stainless steel hardware with brass ferrule. It can be used as a single or co-phase for dual antennas. Designed for CB and 10-meter radios.

Feature:

• Black fade resistant polyethylene jacket replacement whip
• Handles up to 2500 watts
• Heavy-duty 16-gauge wire
• Can be used as a single or co-phase for dual antennas
• Weather-Band Ready
• Tunable PowerPlus Tip
• Top Loaded Coil
• Non-Corrosive Chrome Plated Stainless Steel Hardware and Brass Ferrule
• Fits All 3/8 .in Threaded Mounts

This antenna adapter lets you connect an aftermarket receiver to the factory antenna cable in select 2007 to 2009 Audi Mercedes and VW vehicles. The adapter has a male Motorola connector|turn on lead on one end and a European dual Fakra antenna connector on other end.

Feature:

• Antenna Adapter with Dual FAKRA connector
• 2007 to 2009 Audi|Mercedes|VW
• Easy to install takes only minutes
• Makes your new aftermarket radio functional

The 3-foot Superflex 1000-watt fiberglass antenna whip has 180-degree whip action capability and a Superflex quarter-inch fiberglass rod. The whip is tunable with a top loaded coil 1/4 wavelength design and Mil-Spec polyolefin sheath. It can be used as a single or co-phased antenna. Designed for CB and 10-meter radios.

Feature:

• 180 degree whip action capability
• Superflex quarter-inch fiberglass rod
• Designed for CB and 10 Meter Radios
• Frequency Range 26-30MHz
• Designed for CB and 10 Meter Radios
• 1/4 Wave Length Design
• Fits All 3/8 .in x 24 Threaded Mounts
• Chrome Plated Whip Adapter
• Mil-Spec Polyolefin Sheath

This 18 foot super mini-8 CB antenna cable has a removable FME style connector. For more custom installation a smaller hole will need to be drilled. 95% shielded design protects from loss of signal for increased performance. Molded ends protect from moisture dust and corrosion.

Feature:

• Removable FME style connector
• Weatherproof
• 95% shielded design protects from loss of signal for increased performance
• Molded ends for moisture dust and corrosion protection
• Weatherproof Boot

The 4-foot Superflex 1500-watt fiberglass antenna whip has 180-degree whip action capability and a Superflex quarter-inch fiberglass rod. The whip is tunable with a top loaded coil 1/4 wavelength design and Mil-Spec polyolefin sheath. It can be used as a single or co-phased antenna. Designed for CB and 10-meter radios.

Feature:

• 180 degree whip action capability
• Superflex quarter-inch fiberglass rod
• Designed for CB and 10 Meter Radios
• Frequency Range 26-30MHz
• Designed for CB and 10 Meter Radios
• 1/4 Wave Length Design
• Fits All 3/8 .in x 24 Threaded Mounts
• Chrome Plated Whip Adapter
• Mil-Spec Polyolefin Sheath

The 49(TM) Plus Series trucker antenna has 6000 Watts of power handling and a frequency Range of 26MHz-30MHz. This antenna is Weather-Band Ready and the PowerPlus Tip has Maximum Range and Clarity. A Tunable 17-7 Stainless Steel Whip is Fade Resistant with an Ultrasonic Sealed Weather Proof Lexan(R) Shell. Full 5 Year Guarantee. Designed for CB 10 and 11 Meter Radios.

Feature:

• 6000 Watts Power Handling
• 26MHz - 30MHz Frequency Range
• 10 and 11 Meter Ready
• Weather-Band Ready
• 49 .in Tunable 17-7 Stainless Steel Whip
• PowerPlus Tip for Maximum Range and Clarity
• Center Loaded 8-Gauge Copper Performance Coil Unsurpassed Power Handling
• Fade Resistant Ultrasonic Sealed Weather Proof Lexan(R) Shell
• Full 5 Year Guarantee

The 49-inch Plus Series trucker antenna has 6000-watts of power handling and a frequency range of 26MHz-30MHz. This antenna is weather-band ready. The PowerPlus tip has maximum range and clarity. A tunable 17-7 stainless steel whip is fade-resistant with an ultrasonic sealed weatherproof Lexan(R) shell. Designed for CB 10 and 11 Meter Radios.

Feature:

• 6000-watts power handling
• 26MHz - 30MHz frequency range
• 49-inch tunable 17-7 stainless steel whip
• Fade resistant ultrasonic sealed weatherproof Lexan(R) shell
• 49 .in Tunable 17-7 Stainless Steel Whip
• PowerPlus Tip for Maximum Range and Clarity
• Center Loaded 8-Gauge Copper Performance Coil Unsurpassed Power Handling
• Fade Resistant Ultrasonic Sealed Weather Proof Lexan(R) Shell
• Full 5 Year Guarantee

The 48-inch Hot Rod CB Antenna is rated at 150-wWatts and made in the USA. 3|8 inch x 24 chromed brass ferrule threaded base accepts all standard antenna mounts. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible long lasting antenna.

Feature:

• 48-inches in overall length 150-watts rated
• Traditional sleek style that reduces wind drag load
• White double quarter wave fiberglass CB antenna whip
• Threaded base accepts all standard antenna mounts
• Traditional Sleek Style that Reduces Wind Drag Load
• Individually Pre-Tuned Unique Top Cap Design for Maximum Performance
• Exclusive Double Helical Winding
• Winding Sealed Inside Fiberglass for Long Life and Durability
• Custom Fiberglass Formula for a Flexible Long Lasting Antenna

This 4-foot top-loaded coil 2500-watt replacement whip antenna has a black fade-resistant polyethylene jacket and heavy-duty 16-gauge wire. It handles up to 2500 watts and has a frequency range of 26MHz-30MHz. Also featuring a weather-band ready tunable PowerPlus tip and non-corrosive chrome-plated stainless steel hardware with brass ferrule. It can be used as a single or co-phase for dual antennas. Designed for CB and 10-meter radios.

Feature:

• Black fade resistant polyethylene jacket replacement whip
• Handles up to 2500 watts
• Can be used as a single antenna or co-phase for dual antennas
• Frequency range: 26-30MHz
• Weather-Band Ready
• Tunable PowerPlus Tip
• Top Loaded Coil
• Non-Corrosive Chrome Plated Stainless Steel Hardware and Brass Ferrule
• Fits All 3/8 .in Threaded Mounts

Universal antenna extension cable extends antenna 48in. |4 ft.| includes impedance matching capacitors.

Feature:

• 48 .in (122cm) Antenna Extension Cable with Impedance Matching Capacitors
• Compatible with most vehicles
• Extends antenna 4 feet
• Durable and long lasting Made from premium quality materials

For select 2002-up Volkswagen and BMW vehicles. Powered antenna and newer FACRA style connector to aftermarket radio. Adapter is 7 inches in length.

Feature:

• Powered Antenna and Newer .in FACRA .in Style Connector to Aftermarket Ra
• 2002-Up VW BMW European Vehicles
• 7 inches long
• Black

This Metra 40-NI12 antenna adapter is constructed from copper polypropylene and steel materials and enables you to securely adapt an aftermarket antenna to your compatible 2007 or later Nissan vehicle's OEM radio.

Feature:

• Factory Antenna Cable to Aftermarket Radio
• 2007 and later Nissan
• OEM female plug on one end and Motorola male plug blue wire on other end
• Copper polypropylene and steel material construction

One Pro™ Premium Satellite Antenna

One antenna, all providers: Enjoy the KING One Pro™ advantage. With the introduction of next level satellite antenna technology, the KING One Pro fully automated premium satellite TV antenna gives you the freedom to take your favorite TV programming – on DIRECTV®, DISH® or Bell™ (Canada) satellites – with you on the road, to the great outdoors, or anywhere you go. (Requires compatible receiver and does not provide service while moving.) It’s the only antenna on the market that automatically configures for U.S. satellite service without the use of DIP switches – taking all the guesswork out of getting started. Ideal for RVers, sporting and outdoor enthusiasts, tailgaters, long haul truckers or anyone with an active mobile lifestyle. The KING One Pro is highly portable, easy-to-use, and includes our ultramodern clear cover – Always know where your antenna is pointing. It’s simply better, by design.

Modern design and premium features

At KING, we’re always looking for ways to better serve our customers. With the KING One Pro, we are introducing an enhanced industrial design and our ultramodern, clear cover – Always know where your antenna is pointing. You’ll love the sleek new look and enjoy the maximized signal strength that comes with this design. Trees blocking your line of sight to the satellite? One Pro lets you know. The clear cover allows you to see exactly where your dish is pointing to simplify troubleshooting and ensure you’re receiving the best signal. KING One Pro’s electronics and software means the fully automatic setup is faster and simpler than ever before. KING One pro supports multiple TV viewing*, so you can stay current on more than one show or live event. The One Pro allows you to take your DIRECTV®, DISH® or Bell™ satellite TV service with you wherever you go, so don’t leave the world behind on your next adventure.

Portable and lightweight

The KING One Pro uses next level satellite antenna technology to bring you crystal clear, live TV in just minutes. Weighing only eight pounds, the KING One Pro is compact and the built-in carrying handle makes it easy to transport. For a more permanent setup, you also have the option of easily mounting the antenna to the roof of your RV with the integrated mounting feet (no additional mounting brackets required).  It’s never been easier to stay connected and get digital satellite TV service anywhere you go.

WHO is it for? WHAT does it do?

The KING One Pro is a fully automatic premium portable or roof-mountable satellite TV antenna for DIRECTV®, DISH® or Bell™ programming. Ideal for RVers, sporting and outdoor enthusiasts, tailgaters, long haul truckers or anyone with an active mobile lifestyle, the KING One Pro is highly portable and easy-to-use. Those looking for a more permanent setup can easily mount the antenna to the roof of their RV. Portable and compact (weighing in at only 8 lbs.), KING One Pro offers a fast, easy and reliable connection to your favorite channels.

You’ll never have to miss the big game, breaking news reports, or your favorite show while out and about. Like all of KING’s mobile satellite TV antennas, the KING One Pro is great for camping, RVing, hunting, fishing, or at your backyard barbeque, second home, cabin, or ice fishing house.

How it works:

The KING One Pro automatically configures itself when connected to a compatible receiver using the provided coax cable and in-line power inserter. Within minutes of powering, the KING One Pro premium satellite TV antenna will automatically locate the satellite signal and you will be able to watch crystal clear TV. The KING One Pro is powered over the coax using a small in