CHECK OUT OUR CLEARANCE ITEMS! HUGE SAVINGS!Click Here

 

ASSY-CLUTCH HOUSING ASSY-CLUTCH HOUSING
Online
$15.94 for EA
Mfr PN: POU-530010964
Stock: 9
  • Shipping Rate Weight: .63
  • Product Condition: New
Online
$15.94 for EA
Mfr PN: POU-530010964
Stock: 9

DRIVESHAFT HOUSING-EDGER (SVC/RP) DRIVESHAFT HOUSING-EDGER (SVC/RP)
Online
$20.74 for EA
Mfr PN: HOM-UP03921A
Stock: 5
  • Shipping Rate Weight: 2.5
  • Product Condition: New - Item is brand new, but may not have retail or original packaging.
Online
$20.74 for EA
Mfr PN: HOM-UP03921A
Stock: 5

RING WHEEL BRG RET RING WHEEL BRG RET
Online
$7.92 for Each
Retail $14.24
Mfr PN: 36797
Stock: 522
RING WHEEL BRG RET
Online
$7.92 for Each
Retail $14.24
Mfr PN: 36797
Stock: 522

Poison Spyder Customs Dana 44 Bombshell Differential Cover 42-11-044-PC Poison Spyder Customs Dana 44 Bombshell Differential Cover 42-11-044-PC
Online
$133.76 for Each
Retail $145.31
Mfr PN: 42-11-044-PC
Stock: 302
Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards. The Bombshell differential cover is cast from highly ductile nodular iron—the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick & up to 1" thick—cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface. Dana 44;Cast ductile nodular iron;Black powder coat;Steel;Thickest cast differential cover
Online
$133.76 for Each
Retail $145.31
Mfr PN: 42-11-044-PC
Stock: 302

Ford 8.8in. 4.88 Ratio Ford 8.8in. 4.88 Ratio
Online
$224.99 for Each
Retail $247.49
Mfr PN: 2-2013-488
Stock: 25
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available. For Use Will All Ratio Carriers 10 Year Warranty Computer Heat Treated 8620 Steel Manufactured To O.E. Specifications Double Shot Peened Double Lapped
Online
$224.99 for Each
Retail $247.49
Mfr PN: 2-2013-488
Stock: 25

AXLE BEARING D44 REAR AXLE BEARING D44 REAR
Online
$20.33 for Each
Retail $31.44
Mfr PN: 565903
Stock: 705
AXLE BEARING D44 REAR
Online
$20.33 for Each
Retail $31.44
Mfr PN: 565903
Stock: 705

Dana 30 XJ/YJ Front Reverse 4.88 Ratio Dana 30 XJ/YJ Front Reverse 4.88 Ratio
Online
$200.18 for Each
Retail $214.49
Mfr PN: 2-2032-488R
Stock: 0
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available. For Use In 84-99 Jeep XJ Cherokee Front For Use In 87-96 Jeep YJ Wrangler Front For Use With 3.73 And Up Carrier 10 Year Warranty Computer Heat Treated 8620 Steel Manufactured To O.E. Specifications Double Shot Peened Double Lapped
Online
$200.18 for Each
Retail $214.49
Mfr PN: 2-2032-488R
Stock: 0

Dana 44 30 Spline Lock Right Locker Dana 44 30 Spline Lock Right Locker
Online
$434.20 for Each
Retail $569.98
Mfr PN: 2410-LR
Stock: 0
Brute Force Devices For Rugged Applications,Best Value For Greatly Increased Traction,Complete Replacement Of Diff. Case Not Req.,Simple Installation,Ring And Pinion Setup Not Altered,Installs Easily In Front/Rear Or Both,Proven In Most Demanding Applications For Use With 30 Spline Axles For Open Differential Only No Need To Set Up Gears Reuses Existing Carrier Arrgesive Traction
Online
$434.20 for Each
Retail $569.98
Mfr PN: 2410-LR
Stock: 0

Super-Flex Assembly Super-Flex Assembly
Online
$40.99 for Each
Retail $45.55
Mfr PN: RE3792
Stock: 0
The Rubicon Express Super-Flex cartridge was originally designed to replace the heim joints used in our early suspension designs. The large size joint is designed to fit directly into the factory front or rear lower control arm mounting points on the XJ/MJ/ZJ/TJ/WJ chassis. This cartridge uses UHMW side races and a unique threaded adjuster nut which allows easy tightening and rebuilding if necessary. Rubicon Express ran their JeepSpeed race Cherokee for a complete season on one set of control arms with Super-Flex Joints, without a single failure. After removal at the end of the season, they felt as tight as the day they were installed. In contrast, factory rubber bushings need to be replaced EVERY RACE!
Online
$40.99 for Each
Retail $45.55
Mfr PN: RE3792
Stock: 0

DL-SP-1310-1330-1350- SLINGER DL-SP-1310-1330-1350- SLINGER
Online
$7.00 for Each
Retail $7.70
Mfr PN: 2-86-418
Stock: 2
SEAL
Online
$7.00 for Each
Retail $7.70
Mfr PN: 2-86-418
Stock: 2

D44 OUTER AXLE OIL SEAL D44 OUTER AXLE OIL SEAL
Online
$8.40 for Each
Retail $9.15
Mfr PN: 35239
Stock: 171
D44 OUTER AXLE OIL SEAL
Online
$8.40 for Each
Retail $9.15
Mfr PN: 35239
Stock: 171

AXLE SEAL D30 27SPL AXLE SEAL D30 27SPL
Online
$4.99 for Each
Retail $5.24
Mfr PN: 470160
Stock: 48
Online
$4.99 for Each
Retail $5.24
Mfr PN: 470160
Stock: 48

Super-Flex Assembly Super-Flex Assembly
Online
$35.99 for Each
Retail $40.69
Mfr PN: RE3791
Stock: 51
The Rubicon Express Super-Flex cartridge was originally designed to replace the heim joints used in our early suspension designs. The small size joint is designed to fit directly into the factory front or rear upper control arm mounting points on the XJ/MJ/ZJ/TJ/WJ chassis. This cartridge uses UHMW side races and a unique threaded adjuster nut which allows easy tightening and rebuilding if necessary. Rubicon Express ran their JeepSpeed race Cherokee for a complete season on one set of control arms with Super-Flex Joints, without a single failure. After removal at the end of the season, they felt as tight as the day they were installed. In contrast, factory rubber bushings need to be replaced EVERY RACE!
Online
$35.99 for Each
Retail $40.69
Mfr PN: RE3791
Stock: 51

Heavy Duty Transfer Case Mount Kit Heavy Duty Transfer Case Mount Kit
Online
$105.65 for Each
Retail $126.96
Mfr PN: 105100-1-KIT
Stock: 10
The Trail Gear's HD T case mount is stamped out of 1/4in. thick steel plate, and then welded on a jig to ensure the best fit possible.These T case mount kits are coated with a zinc for a finish that will last a lifetime.The bushings are polyurethane for long lasting performance and durability.
Online
$105.65 for Each
Retail $126.96
Mfr PN: 105100-1-KIT
Stock: 10

54MM AXLE SOCKET 54MM AXLE SOCKET
Online
$21.75 for Each
Retail $23.03
Mfr PN: 140157-1-KIT
Stock: 10
Do you need to tighten or replace your wheel bearings? Then your going to need Mile Marker's Spindle Nut Socket.
Online
$21.75 for Each
Retail $23.03
Mfr PN: 140157-1-KIT
Stock: 10

BULK HEAD KIT BULK HEAD KIT
Online
$24.22 for Each
Retail $25.84
Mfr PN: 170111
Stock: 10
BULK HEAD KIT
Online
$24.22 for Each
Retail $25.84
Mfr PN: 170111
Stock: 10

Driveshaft Bolt Driveshaft Bolt
Online
$9.05 for Each
Retail $9.33
Mfr PN: 6036415AA
Stock: 6
This is a OE Factory driveshaft bolt from Jeep. Use this to replace broken or stripped driveshaft bolts. Sold individually.
Online
$9.05 for Each
Retail $9.33
Mfr PN: 6036415AA
Stock: 6

Truss Upper Link Mounts Truss Upper Link Mounts
Online
$40.78 for Each
Retail $44.75
Mfr PN: BR1044
Stock: 0
These Link Mounts are designed to mount on a flat surface such as a truss. They are CNC cut and bent from 1/4" thick mild steel. The bend strengthens the mount so no additional reinforcement is needed. 2.63" inner width. Please note this requires welding and general fabrication.
Online
$40.78 for Each
Retail $44.75
Mfr PN: BR1044
Stock: 0

CREEPER JOINT KIT CREEPER JOINT KIT
Online
$120.94 for Each
Retail $140.59
Mfr PN: 110766-KIT
Stock: 0
These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball is made from 8620 tool steel and rides on high quality polyurethane bushings. Heavy-duty, hardened steel washers hold the joint together. Creeper Joints are super flexible and allow for up to 40 degrees of movement when used with spacers. A threaded grease fitting is provided on top for lubrication. The flex ball is drilled for cross lubrication flow from the shell to the link mount bolt. Each joint includes a jam nut! Creeper Joint 1.25 in. Thread 18 mm Shackle Mount Pair
Online
$120.94 for Each
Retail $140.59
Mfr PN: 110766-KIT
Stock: 0

Ford 8.8in. Early Master Installation Kit Ford 8.8in. Early Master Installation Kit
Online
$124.93 for Each
Retail $131.99
Mfr PN: 35-2013
Stock: 10
G2 Master kits include all the parts that are needed to properly install a ring and pinion. These G2 kits include hard to find parts like a proper shim kit, replacement pinion nut , crush sleeve, pinion seal, pinion bearings, carrier bearings, ring gear bolts, silicone sealer, locktite and gear marking compound. these are the parts that the auto parts store never seems to have or ever herd of. For Use In 2008 And Earlier Axles Pinion Nut Pinion Seal Timken Outer Pinion Bearing And Race Crush Sleeve Timken Inner Pinion Bearing And Race Pinion Shims Carrier Shims Carrier Bearings And Races Ring Gear Bolts Thread Locking Compound Gear Marking Compound Silicone Sealer
Online
$124.93 for Each
Retail $131.99
Mfr PN: 35-2013
Stock: 10

Dana 60 35 Spline 4.56 Up Air Locking Differential Dana 60 35 Spline 4.56 Up Air Locking Differential
Online
$1205.45 for Each
Retail $1770.94
Mfr PN: RD166
Stock: 4
The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain. ARB onboard air compressor required to activate Air Lockers. SOLD SEPARATELY. For Use With 35 Spline Axles For Use With 4.56 And Up Gears Air Activated Selectable Locker Converts From Open Differential To fully Locked Or Spool Simple Push Button Operation Requires Air Compressor SOLD SEPARATELY
Online
$1205.45 for Each
Retail $1770.94
Mfr PN: RD166
Stock: 4

GM 8.5in. 10 Bolt Front Axle Spindle GM 8.5in. 10 Bolt Front Axle Spindle
Online
$129.16 for Each
Retail $137.49
Mfr PN: 99-2021-1
Stock: 48
G2 has these high strength replacement spindles available for most popular applications. No more searching salvage yards only to find worn out spindles. GM 8.5in. 10 Bolt Front Axle Spindle By G2 Precision Machined From Forged Steel 6 Bolt Mounting Pattern For Use On 1977-1991 GM K5 And Suburban 1/2 &3/4 ton For Use On 1977-1987 GM 1/2 & 3/4 Ton Truck
Online
$129.16 for Each
Retail $137.49
Mfr PN: 99-2021-1
Stock: 48

Dana 30 Inner Axle Seal Dana 30 Inner Axle Seal
Online
$5.96 for Each
Retail $6.45
Mfr PN: 46470
Stock: 0
These seals are one of the most overlooked components in the from axle rebuilding process. These seals seal the housing to the axle shaft and prevent gear oil from running out your axle tubes.
Online
$5.96 for Each
Retail $6.45
Mfr PN: 46470
Stock: 0

Dana 30 TJ/WJ/XJ/ZJ Short 4.56 Ratio Dana 30 TJ/WJ/XJ/ZJ Short 4.56 Ratio
Online
$200.18 for Each
Retail $214.49
Mfr PN: 2-2031-456
Stock: 86
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available. For Use In 97-05 Jeep TJ Wrangler Front For Use In 99 -05 Jeep WJ Grand Cherokee Front For Use In 00-05 Jeep XJ Cherokee Front For Use In 96.5-98 Jeep ZJ Grand Cherokee Front For Use With 3.73 And Up Carrier 10 Year Warranty Computer Heat Treated 8620 Steel Manufactured To O.E. Specifications Double Shot Peened Double Lapped
Online
$200.18 for Each
Retail $214.49
Mfr PN: 2-2031-456
Stock: 86

Track Bar Bracket Front XJ/ZJ 4.5"-7.5" Track Bar Bracket Front XJ/ZJ 4.5"-7.5"
Online
$81.99 for Each
Retail $90.19
Mfr PN: RE1665
Stock: 118
Extra H.D.front track bar bracket for Cherokee and Grand Cherokee. This drop bracket is required for installation of RE1660.
Online
$81.99 for Each
Retail $90.19
Mfr PN: RE1665
Stock: 118

GM 8.5in. Master Installation Kit GM 8.5in. Master Installation Kit
Online
$126.99 for Each
Retail $140.79
Mfr PN: 35-2021
Stock: 5
G2 Master kits include all the parts that are needed to properly install a ring and pinion. These G2 kits include hard to find parts like a proper shim kit, replacement pinion nut , crush sleeve, pinion seal, pinion bearings, carrier bearings, ring gear bolts, silicone sealer, locktite and gear marking compound. these are the parts that the auto parts store never seems to have or ever herd of. For Use In 81-98 8.5in. Rear Axles Only Pinion Nut Pinion Seal Timken Outer Pinion Bearing And Race Crush Sleeve Timken Inner Pinion Bearing And Race Pinion Shims Carrier Shims Carrier Bearings And Races Ring Gear Bolts Thread Locking Compound Gear Marking Compound Silicone Sealer
Online
$126.99 for Each
Retail $140.79
Mfr PN: 35-2021
Stock: 5

HP Dana 30 Front Axle Truss HP Dana 30 Front Axle Truss
Online
$173.81 for Each
Retail $178.62
Mfr PN: XJ3001
Stock: 0
This heavy duty and light weight truss system is designed to take serious abuse and reinforce your front high pinion Dana 30 XJ axle. The 1/4" thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube. The precision cut and formed components of this setup ensure a hassle-free installation. Truss only- No bushings/joints/keyed tabs included. Key hole slots on top of truss where keyed tabs would go must be filled with weld. Use this only if you aren't connecting the passenger side UCA. This kit requires general welding and fabrication skills. Image is for illustrative purposes only.
Online
$173.81 for Each
Retail $178.62
Mfr PN: XJ3001
Stock: 0

MISALIGNMENT SPACERS MISALIGNMENT SPACERS
Online
$27.00 for Each
Retail $29.62
Mfr PN: 186009-KIT
Stock: 1
High misalignment spacers increase misalignment by continuing the spherical diameter of the ball and allowing the edge of the ball to rotate into the body of the rod end. This allows greater articulation, more suspension travel, and longer life of the rod end.
Online
$27.00 for Each
Retail $29.62
Mfr PN: 186009-KIT
Stock: 1

Dana 44 Front Axle Truss Dana 44 Front Axle Truss
Online
$174.24 for Each
Retail $178.62
Mfr PN: JK4401
Stock: 0
This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 44 JK axle. The 1/4" thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube (commonly found in "other" designs). The precision cut and formed components of this setup ensure a hassle-free installation. This kit requires general welding and fabrication skills including welding to the cast center section. This kit is intended for vehicles with at least minor lifts. If using with no lift, check clearances before installing. Not tested on non-US JK's with diesel engines or right hand drive axles.
Online
$174.24 for Each
Retail $178.62
Mfr PN: JK4401
Stock: 0

ROD END KIT ROD END KIT
Online
$53.37 for Each
Retail $61.14
Mfr PN: 186027-KIT
Stock: 4
The main body of this rod end is 100% 4340 chromoly and then finished with a zinc coating, the ball is made out of AISI 52100 material and then hard chrome-plated for a tough finish. The liner is made out of a teflon. Comes with the jame nut.
Online
$53.37 for Each
Retail $61.14
Mfr PN: 186027-KIT
Stock: 4

GM 10.5in. 14 Bolt Mini Spool GM 10.5in. 14 Bolt Mini Spool
Online
$207.52 for Each
Retail $243.87
Mfr PN: 85-2023M
Stock: 8
G2 Axle and Gear Mini Spools are CNC machined from 4130 Billet steel to provide you with an economical traction device with out the cost or set up difficulties associated with other traction devices. For Use With 33 Spline Axles For Use In Open Differentials Requires 4 Cross Pin Open Case CNC Machined From Billet 4130 Steel Heat Treated For Maximum Durability
Online
$207.52 for Each
Retail $243.87
Mfr PN: 85-2023M
Stock: 8

Differential Creeper Breather Kit Differential Creeper Breather Kit
Online
$32.16 for Each
Retail $35.74
Mfr PN: 140207-1-KIT
Stock: 2
Prevents dirt, debris and water from getting in to your axle through the stock axle housing breather. Expands and contracts to accommodate increase or decrease in housing pressure. Kit includes one housing fitting, clamp and bellows. Easy installation takes just a few minutes. This product is not compatible with the Trail-Gear rear axle 4 link upper link mount kit.
Online
$32.16 for Each
Retail $35.74
Mfr PN: 140207-1-KIT
Stock: 2

Don't Miss a Deal or Special Offer!
Get Email Savings and Updates:

About UsContact UsCustomer Service & PoliciesMerchant ServicePrivacy StatementCustomer FeedbackReturn Policy

Copyright © 1999-2021 BuilderDepot, Inc.
Site Designed and Maintained by Inline Internet Systems, Inc.