Product No: Honda-Muffler-L-K1
Made by: Honda Complete Engine Conversion Kit Shipping Weight: 8 Pounds Condition: New The "K1" series of engine has four snaps holding down the air cleaner and a steel valve cover. The exhaust studs run vertically on the "K1" series Left side refers to which way the exhaust blows when looking at the crankshaft side of the engine THIS IS NOT MADE BY HONDA BUT DOES FIT THEIR ENGINE! |
Flowmaster's Super 10 Series 409S Stainless Steel - Single Chamber mufflers are intended for customers who desire the loudest and most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use and not for street driven vehicles. These mufflers utilize the same patented Delta Flow technology that is found in Flowmaster's other Super series mufflers to deliver maximum performance. Super 10 Series mufflers are constructed of 16-gauge 409S Stainless Steel and fully MIG-welded for maximum durability. These mufflers are manufactured in the USA and are covered by Flowmaster?s Lifetime Limited Warranty.
|
All of Magnaflow's Stainless Steel exhaust tips are manufactured from 100% 304 Stainless Steel. 304 Stainless Steel is the highest quality Stainless Steel and retains its high luster polish longer than any other material including Chrome Plating. All of our tips are available in either Single or Double Wall construction and feature Clamp On or Weld On installation. All of Magnaflow's Exhaust Tips are backed with Magnaflow's exclusive Lifetime Warranty.
Tip Material: Stainless Steel
Tip Shape: Round
Tip End Cut: Rolled
Tip Wall: Single
Inlet Size: 2.5-2.75
Tip Outlet Size: 3.5 IN
Tip Length: 12 In
Mounting Style:Clamp On
|
Flowmaster's American Thunder cat-back exhaust system for the 2010-2014 Toyota Tundra pickup trucks with the 5.7L or 4.6L V8 engines is perfect for the person looking for an aggressive sound level with all of the performance benefits that you would expect from Flowmaster. This DOR/DOS (Dual Out Rear, Dual Out Side) bolt on 409S stainless steel system features dual 2.50 in. tailpipes and 3.50 in. polished stainless steel tips. This system is designed to fit regular cab/long bed, double cab/short bed and CrewMax models. The exhaust system is manufactured in the USA and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.
|
DANA 30/44 STUB SHAFT TJ
|
Flowmaster's Outlaw Series Cat-back exhaust system for the 2009-2014 Ford F-150 truck is perfect for the person looking for maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal system for trucks with the 4.6L, 5.0L and 5.4L V8 engines feature a stainless steel Super 10 Series muffler and dual mandrel bent 3.00 in. stainless steel tailpipes for maximum performance. The system also features Black Ceramic coated 4.00 in. double wall stainless steel tips. The exhaust system is manufactured in the USA and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Fits all wheelbases and both 2 and 4 wheel drive models.
|
Utilizing Delta Flow Technology, this muffler gives the best performance to higher horsepower vehicles. The Super 40 features a black, oversize case, which helps reduce resonance while the deep outside tone says it’s a Flowmaster
|
These days, the DIY, or do-it-yourself crowd is all about creating custom work and one-off exhausts are no exception. Whether you're working on a classic car, race car or just your daily driver, a MagnaFlow universal converter should be the standard building block for your custom exhaust. Each converter is built to last with its ribbed design and funneled inlets and outlets, as well as a stainless steel body and heat shield that contain a flow efficient, monolithic honeycomb catalyst designed for maximum flow and surface area. Another great characteristic of MagnaFlow's universal converters is that each part number covers a wide range of applications so one converter will work on a variety of makes and models. Since these items are universal, some modifications may be involved such as cutting or welding.
|
Exhaust spacers are needed for all 2012 and up Jeep JK’s using; suspension kits with 3" or more of lift.. The spacers are installed between the driver and; passenger head pipe flanges and the flanges of the exhaust cross pipe which moves the exhaust cross pipe rearward. This prevents contact between the front driveshaft and the exhaust cross pipe during suspension down travel.
|
Stamped Y-Pipe and True-X Pipe transitions are great for single/dual, dual/dual and balance tube applications. Magnaflow's stainless steel True-X crossover pipe represents a significant leap forward in technology over traditional H-pipes. The more gentle radius allows for better exhaust gas scavenging, noise cancellation and better balance between cylinder banks. The result is a significant increase in power and torque but a reduction in db sound levels... the best of both worlds.
|
1/8" PIPE TEE (BRASS)
|
Exhaust spacers are needed for all 2012 and up Jeep JKs using suspension kits with 3IN or more of lift.. The spacers are installed between the driver and passenger head pipe flanges and the flanges of the exhaust cross pipe. This moves the exhaust cross pipe rearward and prevents contact between the front driveshaft and the exhaust cross pipe during suspension down travel. DVR & PASS SIDE SPACER Fits 2012 to 2016 JK Wrangler, Rubicon and Unlimited;2 and 4-door models;3.6L 6 cylinder engine;Includes driver and passenger side spacers;Needed on JKs with 3+ inch lift;Spacers prevent contact between front driveshaft and exhaust cross pipe;Includes all necessary hardware
|
BLACKJACK FIBERED ALUMINUM ROOF COATING
Protects and seals roof surfaces
Reflective silver finish
Helps reduce cooling costs
Lasts 2-3 times longer than standard -
black coatings
Do not use over shingles or rubber membranes
5175-A-34 1G FIB ALUM RF COAT
SIZE:1 gal
FINISH:Reflective Silvr
|
The Rubicon Express Exhaust loop is needed when ever you're lifting your JK Wrangler
Exhaust Loop Pipe
|
Flowmaster's Outlaw Cat-back exhaust system for the 2014 GM Silverado and Sierra 1500 trucks is perfect for the person looking for maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal system for trucks with the 5.3L V8 engine features a stainless steel Super 10 Series muffler and dual mandrel bent 3.00 in. stainless steel tailpipes for maximum performance. The system also features Black Ceramic coated 4.00 in. double wall stainless steel tips. The exhaust system is manufactured in the USA and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Fits Crew Cab and Double Cab models only.
|
Flowmaster’s Outlaw Axle-back exhaust system for the 2012-2016 Jeep Wrangler with the 3.6L V6 is perfect for the person looking for an aggressive exterior and moderate interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out Rear) emissions-legal system for the 2 and 4 door models, features a specially designed stainless steel Outlaw Series muffler and dual 2.50 inch mandrel bent tailpipes. The system finishes with 4.00 inch black ceramic coated stainless steel tips. The exhaust system is manufactured in the USA with 409S stainless steel and is covered by Flowmaster’s Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.
|
Jeep moved the exhaust forward on the 2012 Wrangler. Unfortunately, on Jeeps with 2.5 or more of lift that means their front driveshaft is liable to make contact with the exhaust Y-Pipe melting the CV boot and causing the driveshaft to fail prematurely. The Rugged Ridge Exhaust Spacer Kit for 3.6L Wrangler helps move the Y-pipe further back and increases the amount of front suspension travel from 2.5 to over 5.5, thus saving your driveshaft. The spacers install on the flanges between the front headers and Y-pipe. The great thing is the kit is easy to install and does not require permanent modification to the exhaust. Hardware included. Backed by Rugged Ridge's exclusive three-year limited warranty.
|
Flowmaster's Outlaw direct fit muffler for the 09-15 Ram 1500 5.7L V8 is perfect for the person looking for a very deep and aggressive sound level outside and inside the vehicle with all of the performance benefits that you would expect from Flowmaster. This exhaust is not for the faint of heart! This bolt-on direct fit muffler for trucks with the factory dual tailpipes features a special build Outlaw muffler that has the inlet pipe and hangers pre welded The exhaust system is manufactured in the USA and is covered by Flowmaster's Lifetime Limited Warranty.
|
Flowmaster’s Super 10 Series mufflers are so aggressive that we can’t even recommend them for use on street driven vehicles. The Super Ten Series utilize the same patented Delta Flow performance technology used in our highly popular Super 40 and Super 44 Series mufflers. Best of all they are constructed with durable 409S Stainless Steel for long life and are offered in a variety of inlet/outlet configurations. These short, single chamber mufflers are as close to open pipe sound as is possible.
|
KRYLON FARM & IMPLEMENT PAINT
Superior performance
Superior rust protection
Fast dry time
VOC compliant program in all states
Easy application
Dedicated colo labels
OEM matching colors
Aerosol-only program direct-to-metal application
1968 1G MASSEY FERGUSON RED
SIZE:1 Gal.
COLOR:Massey Ferg Red
|
Product No: JD317-MUFF-HK1
Made by: Honda Complete Engine Conversion Kit Shipping Weight: 11 Pounds Condition: New |
|
Flowmasters new American Thunder cat-back system for the Jeep Wranglers is perfect for the person looking for maximum performance and ground clearance from their exhaust system. This 2.50" system features a 409S stainless steel mandrel bent tailpipe with a 3.00" polished stainless steel tip and fits both 2 and 4 door models with the 3.6L and 3.8L V6 engines. This system replaces the factory transverse muffler and relocates the Super HP-2 muffler behind the factory catalytic converter, providing a moderate to aggressive sound level. This relocation allows for better ground clearance when driving off-road. Because the tailpipe is tucked up so high, an aftermarket metal bumper is recommended. The exhaust system is manufactured in the USA and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.
|
The 50 Series Heavy Duty Muffler is appropriately named, a tough customer just like the trucks it was designed for. With 4.00-inch internal components and large case size, these mufflers help to significantly increase mileage, torque, and horsepower while greatly improving towing power and acceleration. The 50 Series Heavy Duty is great for gas and diesel applications, and late-model trucks used in the most extreme working conditions. They are constructed of 16-gauge steel and fully MIG-welded for maximum durability. Stainless models carry a limited lifetime warranty
|
Flowmaster’s Super 10 Series mufflers are so aggressive that we can’t even recommend them for use on street driven vehicles. The Super Ten Series utilize the same patented Delta Flow performance technology used in our highly popular Super 40 and Super 44 Series mufflers. Best of all they are constructed with durable 409S Stainless Steel for long life and are offered in a variety of inlet/outlet configurations. These short, single chamber mufflers are as close to open pipe sound as is possible.
|
|
Utilizing Delta Flow Technology, this muffler gives the best performance to higher horsepower vehicles. The Super 40 features a black, oversize case, which helps reduce resonance while the deep outside tone says it’s a Flowmaster
|
Give your vehicle the sound it deserves with MagnaFlow's line of Single and Dual Exhaust Systems. With MagnaFlow's patented muffler system, not only do you gain a deep powerful sound, you boost both horsepower and torque. These system's feature all mandrel bent tubing for better quality and a smoother flow than your stock exhaust system. Authoritative sound when revved and quiet when cruising with no drone. Trust Magnaflow quality.
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |