This USB Port Retention Interface Harness for select 2012 to 2013 Toyota and Lexus vehicles allows you to install an aftermarket stereo and retain the rear USB input port.

Feature:

• Retains the OE USB Port on Select Toyota Vehicles
• Retains the OE USB Port on Select Toyota Vehicles
• Retains the OE USB Port on Select Toyota Vehicles
• Retains the OE USB Port on Select Toyota Vehicles

This vehicle specific wiring harness makes connections between your new Pioneer car stereo and the electrical system of your vehicle. The Pioneer connector is pre wired to the Metra connectors compatible with your 2002 to 2009 Chrysler or Dodge. All you need to do is plug it in.

Feature:

• Radio wiring harness
• Quick and easy installation
• No cutting required
• Only compatible with Pioneer models

This wire harness plugs into any semi truck or other vehicle with an ISO DIN wiring connector. The other end of this harness is non terminated and can be connected to just about any aftermarket stereo such as Jensen Pioneer Alpine etc.

Feature:

• ISO Harness
• Antenna/ Amp Turn On Capability
• Select vehicles with ISO DIN connector Works with most aftermarket radios
• Durable and long lasting Made from premium quality materials

Radio Relocation wiring harness for select 2005 to 2010 Toyota Avalon vehicles keeps the factory radio in vehicle so climate functions are displayed through factory display panel. Must be used with TYTO 01 sold separately. Seamless integration and easy installation with color coded connections. No cutting of factory wiring needed.

Feature:

• Designed to Keep the Factory Radio In the Vehicle
• Climate Control Functions are Still Displayed through Factory Display Panel
• This Harness must be Used Along with the TYTO-01 (Sold Separately)
• No cutting of factory wiring needed

This Turbowire Radio Interface Harness for select 1986 to 2005 Peterbilt|Kenworth trucks plugs into the truck harness at the radio. Features quick and easy installation with no cutting required.

Feature:

• Plugs into truck harness at radio
• Radio wiring harness
• Quick and easy installation
• No cutting required

Universal tape for wire harness bundling in the passenger compartment. It combines important features as noise dampening abrasion resistance and bundling strength while keeping harnesses flexible supporting an easy harness assembly process at the OEM. It is a PET fleece wire harness tape with a rubber based adhesive that is optimized for manual application.

Feature:

• Interior surface panel protection tape
• Abrasion resistant
• Strong adhesion
• Hand-tearable

This vehicle specific wiring harness makes connections between your new Pioneer car stereo and the electrical system of your vehicle. The Pioneer connector is pre wired to the Metra connectors compatible with your 2002 to 2009 Chrysler or Dodge. All you need to do is plug it in.

Feature:

• Radio wiring harness
• Quick and easy installation
• No cutting required
• Only compatible with Pioneer models

The 2 channel trailer quick disconnect cable features 2 camera connection 1 with audio and video and 1 with video only 32-ft. extension to monitor 4 pin din connections for camera 10-ft. trailer coil 1.5-ft. dual camera cable and is IP68 weather-resistant rated.

Feature:

• 2 camera connections: 1 audio and video 1 video only
• 32-foot extension to monitor
• 4-pin din connections for camera
• 10-foot trailer coil
• 1.5' Dual Camera Cable
• IP68

Universal DC Cable Extender - 5'

Universal design for all marine chargers with ring terminal cables. No cutting, stripping or splicing required.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This Rear Seat Entertainment Retention Wiring Harness for select 2007 to 2010 Toyota vehicles allows you to easily remove the factory stereo replace it with an aftermarket stereo and retain the rear seat entertainment audio and video. Aftermarket radio must have A|V output to use this product.

Feature:

• Rear Seat Entertainment Retention Harness
• Select 2007 to 2010 Toyota Vehicles
• Retains Rear Seat Entertainment Audio and Video
• Aftermarket Radio must have Audio In | Video In

This Turbowire Harness for select 1985 to 2005 GM vehicles allows for the installation of an aftermarket radio using the existing factory wiring and connectors with no cutting of the factory wiring required. Connects power and 4 speakers. Please note an additional adapter is required and sold separately to retain factory steering wheel controls if equipped.

Feature:

• 21-Pin Plugs into Car Harness at Radio
• Connects Power and 4 Speakers
• Color coded to make installation easier No Cutting required
• Select 1985 to 2005 GM vehicles

Factory Amplifier Integration Harness for select 2007 and up Nissan vehicles with premium sound systems allows for the installation of an aftermarket radio using the existing factory wiring and connectors. 4 RCA Plugs plug into the aftermarket radios pre amp outputs behind the radio and retains the factory amplifier. |Radio must have at least a 4V preamp output| No cutting of factory wiring needed.

Feature:

• Must use at least a 4-volt preout radio
• Allows installation of aftermarket radio
• Uses existing factory wiring & connectors
• No cutting of factory wiring is needed

The GMOS LAN 012 is designed to retain OnStar OE satellite and retain the warning chimes that are normally lost when the OEM radio is removed. Provides a 12 volt accessory output for aftermarket radio operation. The GMOS LAN 012 also provides a mute parking brake vehicle speed sense and a reverse output to make installing an aftermarket navigation radio simple and less time consuming.

Feature:

• Can be used in non-amplified or analog digital amplified models
• Provides NAV outputs (parking brake reverse mute speed sense)
• Retains the factory backup camera satellite radio and AUX-IN
• Satellite radio information will be displayed through the D.I.C.
• Weight: 46 lbs.

Backup Camera and RSE Retention Harness for select 2008 to 2013 Chrysler Dodge and Jeep vehicles allows you to install an aftermarket radio and retain the factory rear seat entertainment system and backup camera. Provides two Audio and Video signals to be sent to the RSE System. This harness must be used in conjunction with the Axxess XSVI 6522 NAV CHTO 03 or the CHTO 013 Radio Replacement Module.

Feature:

• Allows two audio and video signals to be sent to the RSE system
• Retains the backup camera
• Requires the CHTO-03 to operate
• Designed for overhead video monitors without a DVD player built-in

This Harness for 2015 and Up Subarus with 6.2in screen and without NAV retains the factory backup camera and the factory aux input It also comes with a 12 volt to 6 volt converter.

Feature:

• Includes the AXCAM6V 12 Volt to 6 Volt converter
• Retains the factory backup camera
• Retains factory AUX In jack
• Provides NAV outputs parking brake reverse speed sense