Items 1- 32 of 279 total

ANCHOR KIT STOR BLDG GLV 3PC ANCHOR KIT STOR BLDG GLV 3PC
Online
$26.66 for Each
Retail $33.29
Mfr PN: 59075
Stock: 0
A necessity for wind protection. Provides do-it-yourself protection for any storage building. May be used to anchor fences, tents, trees, boats, carports, antennas, airplanes, pool covers and playground equipment. Includes 30" eye anchors with 4" helix, 4 -1/8" galvanized clamps and 60-1/8" galvanized aircraft cable. Boxed. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$26.66 for Each
Retail $33.29
Mfr PN: 59075
Stock: 0

FF125 1-1/4 IN. NEWEL POST FLANGE FF125 1-1/4 IN. NEWEL POST FLANGE
Online
$9.83 for 1 CD
Retail $12.99
Mfr PN: FF125
Stock: 79
POST FLOOR FLANGE For surface mounting of Newel post FF125 1-1/4 IN. NEWEL POST FLANGE SIZE:1-1/4"
Online
$9.83 for 1 CD
Retail $12.99
Mfr PN: FF125
Stock: 79

123114 19GA 30 FT. STAINLESS STEEL WIRE 123114 19GA 30 FT. STAINLESS STEEL WIRE
Online
$4.50 for 1 CD
Retail $6.99
Mfr PN: 123114
Stock: 0
PACKAGED WIRE Carded dispenser packs of wire In various gauges and types Features award-winning dispenser package 123114 19GA 30 FT. STN STEEL WIRE SIZE:19 Ga. 30 Ft. DESC:Stainless Steel
Online
$4.50 for 1 CD
Retail $6.99
Mfr PN: 123114
Stock: 0

22Ga 75 Ft. Dark Anneled Wire 22Ga 75 Ft. Dark Anneled Wire
Online
$2.20 for 1 CD
Retail $2.99
Mfr PN: 123121
Stock: 17
PACKAGED WIRE Carded dispenser packs of wire In various gauges and types Features award-winning dispenser package 123121 22GA 75 FT. DK ANNELD WIRE SIZE:22 Ga. 75 Ft. DESC:Dark Annealed
Online
$2.20 for 1 CD
Retail $2.99
Mfr PN: 123121
Stock: 17

29201 CENTER SUPPORT KV2 RODS 29201 CENTER SUPPORT KV2 RODS
Online
$1.95 for 1 EA
Retail $2.79
Mfr PN: 29201 ANO
Stock: 5
CENTER HANGER SUPPORT Use with fully extended 72" & 96" rods Anochrome finish 29201 CTR SUPT/KV2 RODS
Online
$1.95 for 1 EA
Retail $2.79
Mfr PN: 29201 ANO
Stock: 5

811330 3 IN. X30 IN. EARTH ANCHOR 811330 3 IN. X30 IN. EARTH ANCHOR
Online
$8.49 for 1 EA
Retail $10.99
Mfr PN: 811330
Stock: 264
This item can NOT be shipped to these states CA
EARTH ANCHOR Steel earth anchor Screws into ground with bar or pipe Use to secure items firmly in position 811330 3 IN. X30 IN. EARTH ANCHOR SIZE:30" ROD/PLATE:7/16" x 3"
Online
$8.49 for 1 EA
Retail $10.99
Mfr PN: 811330
Stock: 264

1175BC 6.5 1/8 BLACK CORNER PLATE 1175BC 6.5 1/8 BLACK CORNER PLATE
Online
$3.11 for 1 EA
Retail $4.69
Mfr PN: N351-505
Stock: 180
1175BC HEAVY-DUTY BLACK CORNER PLATES Used to reinforce 90 degree angles by - applying to the side of the angle Slots for 5/16" carriage bolt Reinforce a variety of joints, seams & cracks Black powder coat finish for weather resistance Boxed loose 1175BC 6.5 1/8 BL CNR PLATE SIZE:6.5"x 1.5"x 1/8" FINISH:Black
Online
$3.11 for 1 EA
Retail $4.69
Mfr PN: N351-505
Stock: 180

USP Lumber JL24 Standard Joist Hanger, 2 X 4 - 6 in, 20 ga T, 455 lb, Steel, Galvanized USP Lumber JL24 Standard Joist Hanger, 2 X 4 - 6 in, 20 ga T, 455 lb, Steel, Galvanized
Online
$24.66 for 50 EA
Retail $44.00
Mfr PN: JL24
Stock: 0
G90 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the paper catalog R7 Refer ence Pages. LIGHT-DUTY 20 Gauge - 1-9/16"W x 1-1/2"D Joist Size=2Ht In=3 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$24.66 for 50 EA
Retail $44.00
Mfr PN: JL24
Stock: 0

Acorn IHW16500 Insulation Support Wire 16 in L, Carbon Steel Acorn IHW16500 Insulation Support Wire 16 in L, Carbon Steel
Online
$26.76 for BX500
Retail $36.19
Mfr PN: IHW16500
Stock: 0
Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2" less than over center joist spacing. 13 Gauge. BULK Joist Spacing OC=16 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$26.76 for BX500
Retail $36.19
Mfr PN: IHW16500
Stock: 0

USP Lumber SCA Stair Angle, 1-3/8 in Leg x 12 ga T, 10 in L, Steel, Triple Zinc Galvanized USP Lumber SCA Stair Angle, 1-3/8 in Leg x 12 ga T, 10 in L, Steel, Triple Zinc Galvanized
Online
$116.66 for 25 EA
Retail $171.25
Mfr PN: SCA10-TZ
Stock: 0
Simplifies stair construction and eliminate the need to calculate and notch stair stringers. Stronger and safer than wood blocking, and the angle and fasteners are hidden from view. Use the SCA9 for single 2x10 stair treads and SCA10 for double 2 x 6 stai r treads. Requires 1/4" x 1-1/2" lag bolts. Meets ICC-ES ESR-1280, FL11664 and L.A. City RR25749 codes. For additional information on installation, please see USP Lumber Connectors charts in the paper catalog R7 Reference Pages. 450 LB. ALLOWABLE DOWNLOAD 10"L x 1-3/8"W - 12 Gauge Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$116.66 for 25 EA
Retail $171.25
Mfr PN: SCA10-TZ
Stock: 0

5010 100 FT. GRID HANGING WIRE 5010 100 FT. GRID HANGING WIRE
Online
$4.26 for 1 EA
Retail $5.79
Mfr PN: 5010
Stock: 6
This item can NOT be shipped to these states CA
GRID HANGING WIRE Will not scratch Use with lag screws & nails 5010 100 FT. GRID HANGING WIRE SIZE:100' Coil
Online
$4.26 for 1 EA
Retail $5.79
Mfr PN: 5010
Stock: 6

Marshalltown TWR26 Tie Wire Reel, Plastic, Red Marshalltown TWR26 Tie Wire Reel, Plastic, Red
Online
$23.06 for Each
Retail $32.95
Mfr PN: TWR26
Stock: 0
Color=Red This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$23.06 for Each
Retail $32.95
Mfr PN: TWR26
Stock: 0

MA100 MASONRY ANCHOR 4/CD MA100 MASONRY ANCHOR 4/CD
Online
$6.29 for 1 PR
Retail $7.99
Mfr PN: MA100
Stock: 15
MASONRY ANCHOR Use to anchor to solid masonry MA100 MASONRY ANCHOR 4/CD DESC:4 ct Card
Online
$6.29 for 1 PR
Retail $7.99
Mfr PN: MA100
Stock: 15

TDX2-TZ 8 IN. TIE DOWN TDX2-TZ 8 IN. TIE DOWN
Online
$9.20 for 1 EA
Retail $12.99
Mfr PN: UTDX2TZ
Stock: 74
TDX SERIES HOLDOWNS Features formed, self-jigging design G90 galvanized finish Triple-zinc for ACQ treated wood TDX2-TZ 8 IN. TIE DOWN SIZE:8.5x 2.06x 2.75" FINISH:Triple-Zinc
Online
$9.20 for 1 EA
Retail $12.99
Mfr PN: UTDX2TZ
Stock: 74

USP Lumber JL26IF-TZ Standard Invert Flange Joist Hanger, 2 X 6 in, 18 ga T, 695 - 830 lb, Steel USP Lumber JL26IF-TZ Standard Invert Flange Joist Hanger, 2 X 6 in, 18 ga T, 695 - 830 lb, Steel
Online
$1.65 for Each
Retail $1.95
Mfr PN: JL26IF-TZ
Stock: 0
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allo wable loads and fasteners, please see USP Lumber Connectors charts in the paper catalog R7 Reference Pages. TRIPLE ZINC FOR ACQ PRESSURE TREATED LUMBER 18 GAUGE - 1-9/16"W x 1-1/2"D Joist Size=2 x 6Ht In=4-1/2 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$1.65 for Each
Retail $1.95
Mfr PN: JL26IF-TZ
Stock: 0

123107 24GA 325 FT. GALVANIZED WIRE 123107 24GA 325 FT. GALVANIZED WIRE
Online
$5.26 for 1 CD
Retail $7.99
Mfr PN: 123107
Stock: 0
PACKAGED WIRE Carded dispenser packs of wire In various gauges and types Features award-winning dispenser package 123107 24GA 325 FT. GALV WIRE SIZE:24 Ga. 250 Ft. DESC:Galvanized
Online
$5.26 for 1 CD
Retail $7.99
Mfr PN: 123107
Stock: 0

RH Tamlyn PCS1532 Plywood Clip, 20 ga Steel, Galvanized RH Tamlyn PCS1532 Plywood Clip, 20 ga Steel, Galvanized
Online
$7.92 for BX250
Retail $10.49
Mfr PN: PCSL1532
Stock: 0
Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed. Size In=15/32 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$7.92 for BX250
Retail $10.49
Mfr PN: PCSL1532
Stock: 0

USP Lumber FA3-TZ Foundation Anchor, 2 X 4 in/2 X 6 in, 2000 psi, 16 ga, Steel USP Lumber FA3-TZ Foundation Anchor, 2 X 4 in/2 X 6 in, 2000 psi, 16 ga, Steel
Online
$69.33 for 50 EA
Retail $137.50
Mfr PN: FA3-TZ
Stock: 0
For securing mudsills and framing into concrete slabs. Do not rely-on for securing concrete sections together between cold joints. Features split flange for nailing to both mudsill and stud for greater framing versatility. Use a minimum of 2 anchors per m udsill within 12" of the end of each section. Meets ICC-ES ESR-2787 codes For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the paper catalog R7 Reference Pages. 16 GAUGE - FOR 2 X 4-6 PLATE 11-1/8"H - For ACQ Pressure Treated Lumber Finish=Triple Zinc This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$69.33 for 50 EA
Retail $137.50
Mfr PN: FA3-TZ
Stock: 0

USP Lumber LSTA36 Light Capacity Strap Tie, 1-1/4 in, 1640 lb Uplift Douglas Fir, 18 ga Steel USP Lumber LSTA36 Light Capacity Strap Tie, 1-1/4 in, 1640 lb Uplift Douglas Fir, 18 ga Steel
Online
$82.66 for 50 EA
Retail $164.50
Mfr PN: LSTA36
Stock: 0
Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional inform ation including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the paper catalog R7 Reference Pages. 18 Gauge Wdth x Lgth In=1-1/4 x 36 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$82.66 for 50 EA
Retail $164.50
Mfr PN: LSTA36
Stock: 0

1184BC 4.7X3 1/8 BLACK MEND PLATE 1184BC 4.7X3 1/8 BLACK MEND PLATE
Online
$2.95 for 1 EA
Retail $3.79
Mfr PN: N351-462
Stock: 102
1184BC RECTANGULAR MENDING PLATE Used for attaching, connecting, aligning, - and splicing materials Slots for 5/16" carriage bolt Chamfered corners provide decorative look Use for heavy-duty reinforcement of joints,- seams and cracks Black powder coat finish for weather resistance Boxed loose 1184BC 4.7X3 1/8 BL MEND PLATE SIZE:4.7"x 3"x 1/8" FINISH:Black
Online
$2.95 for 1 EA
Retail $3.79
Mfr PN: N351-462
Stock: 102

USP Lumber STS1 Single Stud Joist Hanger, 16 ga T, Steel USP Lumber STS1 Single Stud Joist Hanger, 16 ga T, Steel
Online
$219.33 for 50 EA
Retail $384.50
Mfr PN: STS1
Stock: 0
Typically used with 2" OD pipe to reinforce joists, plates, studs, or rafters which have been drilled or notched during construction. Not for total member replacement in structural applications. G90 galvanized finish. Single stud requires ten 10d x 1-/12 fasteners and double stud requires twelve 10d and 2" maximum hole size. 16 Gauge - Single Stud Wdth x Ht In=1-9/16 x 5 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$219.33 for 50 EA
Retail $384.50
Mfr PN: STS1
Stock: 0

Simpson Strong-Tie LSTA Light Duty Strap Tie, 9 in L X 1-1/4 in W, Steel, Hot Dip Galvanized Simpson Strong-Tie LSTA Light Duty Strap Tie, 9 in L X 1-1/4 in W, Steel, Hot Dip Galvanized
Online
$25.33 for 50 EA
Retail $48.50
Mfr PN: LSTA9
Stock: 0
20 Gauge Wdth x Lgth In=1-1/4 x 9 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$25.33 for 50 EA
Retail $48.50
Mfr PN: LSTA9
Stock: 0

USP Lumber LSTA24 Light Capacity Strap Tie, 1-1/4 in, 1235 lb Uplift Douglas Fir, 20 ga Steel USP Lumber LSTA24 Light Capacity Strap Tie, 1-1/4 in, 1235 lb Uplift Douglas Fir, 20 ga Steel
Online
$49.33 for 50 EA
Retail $99.50
Mfr PN: LSTA24
Stock: 0
Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional inform ation including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the paper catalog R7 Reference Pages. 20 Gauge Wdth x Lgth In=1-1/4 x 24 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$49.33 for 50 EA
Retail $99.50
Mfr PN: LSTA24
Stock: 0

1-1/4 In. Connectors 1-1/4 In. Connectors
Online
$9.84 for 1 ST
Retail $12.99
Mfr PN: ND125
Stock: 97
NO-DRILL RAIL FASTENER KIT Standard-type no-drill, adjustable connector Attaches rails to posts, columns & walls 1 package required for each rail section Kit includes 4 fasteners w/nuts & bolts ND125 1-1/4 IN. CONNECTORS SIZE:1-1/4"
Online
$9.84 for 1 ST
Retail $12.99
Mfr PN: ND125
Stock: 97

TZ WET ANCH 3-1/2X3-1/4X4-3/4 TZ WET ANCH 3-1/2X3-1/4X4-3/4
Online
$98.88 for 12 EA
Retail $145.80
Mfr PN: WE44-TZ
Stock: 0
Secures posts to concrete in light-duty and medium-duty applications such as patio covers, carports or decks. Formed, one-piece design includes embossing for additional lateral strength. Not for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires (2) 1/2" HDG bolts or (12) HDG nails for fastening to post. Meets SBCCI, BOCA - NER 530 & NER 608, ICBO 5700, ICBO 2039, ICBO 5531, FL821, FL822, L.A. City RR 25337, and DSA P A-076 codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the paper catalog R7 Reference Pages. TRIPLE ZINC - FOR ACQ PRESSURE TREATED LUMBER 3-1/2"W x 3-1/4"L x 4-3/4"H Post Size In=4 x 4 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$98.88 for 12 EA
Retail $145.80
Mfr PN: WE44-TZ
Stock: 0

Stainless Steel Ties 200# 14.2"L x .18W Stainless Steel Ties 200# 14.2"L x .18W
Online
$41.10 for 100-Pack
Retail $54.50
Mfr PN: 20918
Stock: 12400
Stainless Steel Ties 200# 14.2"L x .18W - Stainless Steel Ties are perfectly suited to hostile environments.

Stainless Steel Ties 200# 14.2"L x .18W features include:

  • Made of Stainless Steel Grade 304
  • Stainless Steel Ties are ideally suited for Hazardous Environments & Heavy Loads
  • Roller-ball design allows Low Insertion Force
  • Self locking for fast and easy installation
  • Smooth rounded edges will not damage wires
  • Can install by hand or with tool
  • Normal Operating Temperature –112°F to 1000°F (–80°C to 538°C)
  • Stainless Steel Ties are Non-Magnetic, UV resistant & fireproof
  • Dimension Measurements = Inches
  • Order Qty of 100 = 1 Bag of 100

Below is more info on our Stainless Steel Ties 200# 14.2"L x .18W

Tensil Strength (LBS.): 2#
Length: 14.2''
Width: .18''
Thickness: .1''
Max Bundle Dia: 4''
Bag Qty: 1
Master Bag Qty: 4 This item does not ship to APO/FPO addresses.
Online
$41.10 for 100-Pack
Retail $54.50
Mfr PN: 20918
Stock: 12400

RT3A HURRICANE/SEISMIC ANCHOR RT3A HURRICANE/SEISMIC ANCHOR
Online
$0.47 for 1 EA
Retail $0.59
Mfr PN: URT3A
Stock: 1849
RT3A REVERSIBLE HURRICANE & SEISMIC ANCHOR Reversible, double-plated design Ties trusses & rafters to top plates May be used to tie wood framing members Resists uplifts & lateral forces RT3A HURRICANE/SEISMIC ANCHOR SIZE:4.5"x1.44"x #18 FINISH:Galvanized
Online
$0.47 for 1 EA
Retail $0.59
Mfr PN: URT3A
Stock: 1849

RT7ATZ HURRICANE ANCHOR RT7ATZ HURRICANE ANCHOR
Online
$0.53 for 1 EA
Retail $0.65
Mfr PN: URT7ATZ
Stock: 1029
RT7A DOUBLE PLATE RAFTER TIE Truss/rafter to double plate installation Adds increased resistance to wind uplift - as well as lateral forces Section lengths; 4" and 2-7/16" 6-1/2"L x 1-1/2" width Section lengths; 4" and 2-7/16" RT7ATZ HURRICANE ANCHOR SIZE:1.5"x 6.5"x #18 FINISH:Triple-Zinc
Online
$0.53 for 1 EA
Retail $0.65
Mfr PN: URT7ATZ
Stock: 1029

80740 BAR TIE TWISTER HANDLE 80740 BAR TIE TWISTER HANDLE
Online
$2.55 for 1 EA
Retail $2.99
Mfr PN: 80740
Stock: 869
This item can NOT be shipped to these states CA
BAR TIE TWISTER HANDLE Convenience and speed when tying double loop- wire ties Wooden handle with steel twister 80740 BAR TIE TWISTER HANDLE
Online
$2.55 for 1 EA
Retail $2.99
Mfr PN: 80740
Stock: 869

TB2527 14CT SMALL D RING HANGER TB2527 14CT SMALL D RING HANGER
Online
$6.15 for 1 EA
Retail $7.99
Mfr PN: N261-488
Stock: 272
TB2527 14CT SM D RING HANGER
Online
$6.15 for 1 EA
Retail $7.99
Mfr PN: N261-488
Stock: 272

TR1 SGL SLOT ROOF TRUSS TIE TR1 SGL SLOT ROOF TRUSS TIE
Online
$0.58 for 1 EA
Retail $0.75
Mfr PN: UTR1
Stock: 180
SINGLE SLOT ROOF TRUSS TIE Single slotted design roof truss tie Allows truss to deflect without imposing - load on wall below 18 gauge steel construction G90 galvanized TR1 SGL SLOT ROOF TRUSS TIE SIZE:1.25"x2.75"x #18 DESC:Galvanized
Online
$0.58 for 1 EA
Retail $0.75
Mfr PN: UTR1
Stock: 180

FLOOR MAT CLIPS 2 FLOOR MAT CLIPS 2
Online
$0.41 for Each
Retail $0.50
Mfr PN: 11043333
Stock: 160
Online
$0.41 for Each
Retail $0.50
Mfr PN: 11043333
Stock: 160