ADJUSTABLE ROOF FLASHING
Used where the vent passes through a roof
3BVF 3 IN. ADJ ROOF FLASHING
SIZE:3"
COLOR:Silver
|
ADJUSTABLE ROOF FLASHING
Used where the vent passes through the roof
8BVF 8 IN. ADJ ROOF FLASHING
SIZE:8"
COLOR:Silver
|
ADJUSTABLE ROOF FLASHING
Used where the vent passes through a roof
4BVF 4 IN. ADJ ROOF FLASHING
SIZE:4"
COLOR:Silver
|
ADJUSTABLE ROOF FLASHING
Used where the vent passes through the roof
5BVF 5 IN. ADJ ROOF FLASHING
SIZE:5"
COLOR:Silver
|
ADJUSTABLE ROOF FLASHING
Used where the vent passes through a roof
6BVF 6 IN. ADJ ROOF FLASHING
SIZE:6"
COLOR:Silver
|
ADJUSTABLE ROOF FLASHING
Used where the vent passes through a roof
7BVF 7 IN. ADJ ROOF FLASHING
SIZE:7"
COLOR:Silver
|
ROLL VALLEY FLASHING
Roll flashing is easy to bend, cut & shape
Ideal for protecting commercial or residentialroof from elements
70036 36 IN. X50 FT. GL ROLL VALLEY
SIZE:36" x #32
DESC:50' Roll Galvnzd
|
TYPE B GAS VENT ADJUSTABLE ROOF FLASHING
Use to weather proof the penetration of vent pipe through the roof
Storm collar required
For roof pitches of 0/12 - 6/12
Made of galvalume
8GVF 8 IN. ADJ ROOF FLASHING
SIZE:8"
COLOR:Galvanized
|
This item can NOT be shipped to these states CA
SUNTUF WALL CONNECTOR FLASHING Used to prevent drips & leaks Clear flashing to match different panel colors For use w/Suntuf Corrugated Poly Panels 108657 4 FT. 2X5 CL WAL CONN FLASH SIZE:4' 2" x 8" COLOR:Clear |
ROLL VALLEY FLASHING
Roll flashing is easy to bend, cut & shape
Ideal for protecting commercial or residentialroof from elements
70030 30 IN. X50 FT. GL ROLL VALLEY
SIZE:30" x #32
DESC:50' Roll Galvnzd
|
THERMOPLASTIC NO-CALK ROOF FLASHING
Non-fading, non cracking, no-calk rigid black thermoplastic base for roof pitch 0-45 deg.
Self-sealing collar slides over pipe
Not for hot-mopped or built-up roofs
Rated 180 degF continue heat & type-B approved
Do not apply petroleum or paint product
11890 3 IN. THERMOPLASTIC FLASHING
BASE FIT:11 x 15"
PIPE FIT:3"
|
Use this roof flashing to weatherproof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12 - 6/12. Made of galvalume.
|
This 0/12 - 6/12 pitch roof flashing is used to weatherproof the penetration of chimney pipe through the roof. Storm collar required.
|
ROLL VALLEY FLASHING
Roll flashing is easy to bend, cut & shape
Ideal for protecting commercial or residentialroof from elements
66320 20 IN. X10 FT. AL ROLL VALLEY
SIZE:20 x .0078"
DESC:10' Roll Alum
|
The FAKRO ELW Step Flashing is a special flashing used only for FAKRO FWU Roof Access windows. The FAKRO ELW Step Flashing is for use with flat roofing materials.
|
DURAPLUS ROOF FLASHING
0/12-6/12 pitch DuraPlus roof flashing
Use to weather proof the penetration of chimney pipe through the roof
Storm collar required
Made of galvalume steel
6DP-F6 0/12-6/12 ROOF FLASHING
DESC:For 6" Vent
COLOR:Galvanized
|
GALVANIZED Z-BAR FLASHING
Economy profile Z-Bar protects wood siding sheet from moisture damage
Use between wood siding sheets
Overlap joints 4 to 6" to protect T-111 horizontal connections from water
Use sealant (not included) to seal overlap for watertight application
5651600120 7/16 10 FT. GL Z BAR
SIZE:7/16x10' #32
FINISH:GalvanizedFor 7/16" Sheets
|
ALL-FLASH NO-CALK ALUMINUM FLASHING
Self-sealing collar slides over pipe
Metal base for pitch from 0-40 degrees
Non-fading, non-cracking & non-rusting bases
Ring on collar tears off, allowing flashings to seal different pipe diameters
Approved for Type-B installations
Not for hot-mopped or built-up roofs
Rated 180 degF continuous heat
12976 1-1/2 IN. -3 IN. ALUM FLASHING
FIT:1-1/2 - 3"
|
ALUMINUM NO-CALK ROOF FLASHING
Rust-proof, no-caulk, .032" stamped alum base
Allows for easy shaping of flashing
Rated 180 degF continuous heat & Type-B approved
Base for pitch 0-40 deg. or up to a 10/12 roof
Self-sealing collar slides over pipe
Apply no petroleum or paint product to flashing
Not for hot-mopped or built-up roofs
12949 3 IN. ALUM ROOF FLASHING
BASE FIT:11 x 14-1/2"
PIPE FIT:3"
|
ALUMINUM NO-CALK ROOF FLASHING
Rust-proof, no-caulk, .032" stamped alum base
Allows for easy shaping of flashing
Rated 180 degF continuous heat & Type-B approved
Base for pitch 0-40 deg. or up to a 10/12 roof
Self-sealing collar slides over pipe
Apply no petroleum or paint product to flashing
Not for hot-mopped or built-up roofs
12958 4 IN. ALUM ROOF FLASHING
BASE FIT:12 x 15"
PIPE FIT:4"
|
ALUMINUM NO-CALK ROOF FLASHING
Rust-proof, no-caulk, .032" stamped alum base
Allows for easy shaping of flashing
Rated 180 deg F continuous heat & Type-B -
approved
Base for pitch 0-40 deg. or up to a 10/12 roof
Self-sealing collar slides over pipe
Apply no petroleum or paint product to flashing
Not for hot-mopped or built-up roofs
12936 2 IN. ALUM ROOF FLASHING
BASE FIT:9"x12-1/2"
PIPE FIT:2"
|
GALVANIZED NO-CALK ROOF FLASHING
Galvanized, no-caulk roof flashing
Rated 180 degF continuous heat & Type-B approved
Base for pitch 0-40 deg. or up to a 10/12 roof
Self-sealing collar slides over pipe
Apply no petroleum or paint product to flashing
Not for hot-mopped or built-up roofsEND
11880 4 IN. GALV ROOF FLASHING
BASE FIT:12 x 15"
PIPE FIT:4"
|
GALVANIZED NO-CALK ROOF FLASHING
Galvanized, no-caulk roof flashing
Rated 180 degF continuous heat & Type-B approved
Base for pitch 0-40 deg. or up to a 10/12 roof
Self-sealing collar slides over pipe
Apply no petroleum or paint product to flashing
Not for hot-mopped or built-up roofsEND
11854 2 IN. GALV ROOF FLASHING
BASE FIT:9 x 2-1/2"
PIPE FIT:2"
|
MASTER FLASH ROOF FLASHING
Engineered for profiled roofing systems at anypitch
Rated 212 deg. F continuous heat
Approved for Type-B installations
Easily customized to accommodate broad range ofpipe diameters
14052 1/4 - 5-3/4 IN. RF FLASHING
BASE FIT:8 x 8"
PIPE FIT:1/4 - 5-3/4"
|
GALVANIZED NO-CALK ROOF FLASHING
Galvanized, no-caulk roof flashing
Rated 180 degF continuous heat & Type-B approved
Base for pitch 0-40 deg. or up to a 10/12 roof
Self-sealing collar slides over pipe
Apply no petroleum or paint product to flashing
Not for hot-mopped or built-up roofsEND
11867 3 IN. GALV ROOF FLASHING
BASE FIT:11 x 14-1/2"
PIPE FIT:3"
|
ROLL VALLEY FLASHING
Roll flashing is easy to bend, cut & shape
Ideal for protecting commercial or residentialroof from elements
70004 4 IN. X50 FT. GL ROLL VALLEY
SIZE:4" x #32
DESC:50' Roll Galvnzd
|
THERMOPLASTIC NO-CALK ROOF FLASHING
Non-fading, non cracking, no-calk rigid black thermoplastic base for roof pitch 0-45 deg.
Self-sealing collar slides over pipe
Not for hot-mopped or built-up roofs
Rated 180 degF continue heat & type-B approved
Do not apply petroleum or paint product
11891 4 IN. THERMOPLASTIC FLASHING
BASE FIT:12 x 16"
PIPE FIT:4"
|
This universal rubber boot flashing kit includes everything you need for a solid, secure venting connection for your chimney. In this kit, you'll find rubber boot, spacer kit, storm collar, and mounting screws. Required for corrugated roofs.
|
THERMOPLASTIC NO-CALK ROOF FLASHING
Non-fading, non cracking, no-calk rigid black thermoplastic base for roof pitch 0-45 deg.
Self-sealing collar slides over pipe
Not for hot-mopped or built-up roofs
Rated 180 degF continue heat & type-B approved
Do not apply petroleum or paint product
11899 2 IN. THERMOPLASTIC FLASHING
BASE FIT:9-1/4 x 13"
PIPE FIT:2"
|
ESM MASTER FLASH ROOF FLASHING
ESM (Electric Service Mast) master flash roof flashing for electrical mast connection EMC
Tear out collar makes flashing accommodate mastand pipe sizes from 0 to 5-3/8" diameter
Made of EPDM with flexible, soft aluminum base
Detachable collar for ESM applications
Do not apply petroleum based products or paint
Not for hot-mopped or built-up roofs
14090 ESM ROOF FLASHING
SIZE:15" x 15"
FINISH:Aluminum/Black
|
Use this roof flashing to weatherproof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12 - 6/12. Made of galvalume.
|
MASTER FLASH ROOF FLASHING
Engineered for profiled roofing systems at anypitch
Rated 212 deg. F continuous heat
Approved for Type-B installations
Easily customized to accommodate broad range ofpipe diameters
14053 3-6 IN. MASTERFLASH
BASE FIT:10 x 10"
PIPE FIT:3 - 6"
|
|
|
|
|
Copyright © 1999-2023 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |