Chimney RX Crack & Joint Sealant is brushable elastomeric sealant for mortar joints used to repair exterior cracks in mortar on chimneys, brick walls and between concrete or stone masonry units. The product seals larger cracks and other defects that cannot be corrected with water repellents alone. Crack & Joint Sealant seals crack up to 1/8" wide on brick faces and at mortar and brick joint interfaces to provide waterproof protection. It dries to a clear, translucent, milky film. Crack & Joint Sealant prevents water infiltration and subsequent damage, yet allows water vapor to escape. When applied to a properly prepared wall or chimney surface, Crack & Joint Sealant can solve tough leak problems without the expense of truck pointing or surface grouting. Use ChimneyRx Masonry Crack and Joint Sealant along with ChimneyRx Masonry Chimney Water Repellent to provide maximum protection. A one pint container will treat the mortar joints surrounding approximately 110 standard bricks, or approximately 25 square feet of wall surface.
|
Features
|
Multi Purpose Thin Set
|
Patch All Repair Mortar
|
FREEZE STOP - 5 GALLON
Multi-purpose admixture for use with Portland cement/lime mortar andprepared masonry mortars and non-reinforced concrete Special formulation combines a calcium chloride with powerful wetting agent Permits masonry to bear loads sooner Increases early and ultimate strengths, tensile and compressive strengths Minimizes shrinkage Significantly reduces efflorescence 5 gallon |
This fireplace mortar is an excellent product to tuckpoint between firebricks and repair broken firebricks. Maximum application thickness is 1/8." Withstands temperatures up to 2000F. Not for exterior use.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |