UPS Network Management Card with PowerChute Network Shutdown & Environmental Monitoring
|
UPS Network Management Card with PowerChute Network Shutdown
|
APC Rack PDU 9000 Switched ZeroU 11.0kW 230V (21) C13 & (3) C19
|
APC Rack PDU 9000 Switched ZeroU 30A 120/208V (16) 5-20R (7) C13 (1) C19
|
APC Rack PDU 9000 Switched ZeroU 11.5kW 208V (21) C13 & (3) C19
|
APC Rack PDU 9000 Switched ZeroU 30A 200/208V (21) C13 & (3) C19
|
APC NetShelter Rack PDU 9000 Switched ZeroU 16A 100-240V (21) C13 & (3) C19 Japan
|
APC Rack PDU 9000 Switched ZeroU 20A 208V (21) C13 & (3) C19 L620 Cord
|
APC Rack PDU 9000 Switched ZeroU 5.7kW 200/208V (21) C13 & (3) C19
|
APC Rack PDU 9000 Switched ZeroU 8.6kW 208V (21) C13 & (3) C19
|
APC Rack PDU 9000 Switched ZeroU 17.2kW 208V (20) C13 (12) C19
|
APC Rack PDU 9000 Switched ZeroU 17.2kW 208V (42) C13 (6) C19
|
NetBotz Room Monitor 755 Environmental Monitoring - The NetBotz Room Monitor 755 provides integrated surveillance sensing access control and advanced alerting for IT environmentsof all sizes where IT rack space is unavailable. Built-in true private network switch for use with NetBotz Camera Pod 165 (NBPD0165) or other downstream IP devices. Integrates with APC racks NetBotz sensors and Data Center Expert for easy deployment configuration and management. Can be the environmental monitoring solution or the rack access control solution or both. Supports the new HD Low Light Camera Pod 165 (NBPD0165) Manage up to 47 NetBotz wireless temperature and temp/humidity sensors from a single NetBotz. Detect and record motion allowing a visual record to be paired with an access or environmental alert which speeds root cause analysis. Grant authorized people access to equipment through proximity card authentication. Detect and record motion allowing a visual record to be paired with an access or environmental alert which speeds root cause analysis.The rack access handle kits provide an audit trail on who is accessing the enclosures so the organization can easily comply with data security regulations. Manage up to 47 NetBotz wireless temperature and temp/humidity sensors from a single NetBotz. Operating Temperature: 32 - 113 F (0 - 45 C) Operating Elevation:0 - 9842.52ft (0 - 3000meters) Storage Temperature: -15 - 65 C Storage Elevation: 0 - 49212.6ft (0 - 15000meters). Camera Frame Rate:Up to 30 fps Type of External Sensors Supported: 0-5V Door contact Dry contact Fluid spot leak Humidity Smoke Temperature Vibration Number of Universal Sensor Ports: 4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies.
|
Tripp Lite UPS Battery Replacement for Select SMART1200LCD SMART1500LCD SMART1500LCDXL SMX1500LCD UPS Systems
|
Tripp Lite's Hot-swap PDU systems enable live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads. Dual input power cables support PDU connection to separate Utility and UPS power sources. Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS. Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS. Set the switch to Utility to momentarily power connected equipment from the Utility line cord and bypass the UPS while the UPS system is removed and replaced with a fresh one. Once the new UPS is up and running with all data and electrical connections restored set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment. PDUBHV10 is universally compatible with any Tripp Lite or other brand of 200-240V UPS rated up to 1500VA with a C14 input cable option. Pair of detachable PDU input cables connect to separate Utility and UPS power sources (set of 2 C13-C14 interconnect cables included; user supplied alternate cabling supported). 8 C13 outlets support critical networking loads in both Utilty and UPS operating modes. 2U rackmount installation in 2 or 4 post racks with support for space saving rear-post mounting in the same rack space as your Tripp Lite Rackmount UPS (select installations see manual). Key Features Tripp Lite Hot-swap PDU systems support live-replacement of standard UPS systems for maintenance with no interruption of connected server or networking loads PDUBHV10 is universally compatible with any Tripp Lite or other brand of 200-240V UPS rated up to 1500VA with a C14 input cable option 2U horizontal rackmount form factor compatible with 2 or 4 post racks Supports space saving rear-post mounting in the same rack space as many Tripp Lite Rackmount UPS systems (select installations see manual) Pair of detachable PDU input cables connect to separate Utility and UPS power sources (2 C13-C14 interconnect cables included - user supplied alternate cabling supported) 8 C13 outlets support critical networking loads in both Utility and UPS operating modes One additional C13 pass-through outlet supports UPS input power cord Dual input power cables support PDU connection to separate Utility and UPS power sources Manual transfer switch with lighted status indicators controls the source of power to connected equipment between Utility and UPS Set the switch to UPS during normal operation and connected equipment will receive full-time conditioned power from the UPS Set the switch to Utility to bypass the UPS and provide connected equipment with unfiltered power directly from the Utility line cord while the UPS system is removed and replaced with a fresh one Once the new UPS is up and running with all connections restored set the switch back to the UPS setting to once again provide fully-conditioned UPS power to connected equipment Typical Applications Hot-swap PDUs are ideal to install along with standard UPS systems to ensure that connected networking equipment will see no power interruption as the UPS is serviced replaced or upgraded Package Includes Hot-swap PDU System 2U mounting brackets Set of 2 C13-C14 interconnect cables User manual with warranty information
This item cannot be shipped to APO/FPO addresses. Please accept our apologies.
|
Tripp Lite PDU Basic 13 NEMA 5-15R Outlets 5-15P Input 1.8kW 6ft Cord 1URM
|
Tripp Lite PDU Basic 28 5-15/20R L5-20P 5-20P Adapter 1.9kW 15ft Cord 60in
|
Tripp Lite PDU Basic 36 5-15/20R L5-20P 5-20P Adapter 1.9kW 15ft Cord 72in
|
Tripp Lite PDU Basic 24 5-15/20R L5-30P 2.9kW 120V 10ft Cord 63.75in 0U
|
Tripp Lite PDU Basic 12 NEMA 5-15/20R L5-30P 2.9kW 120V 10ft Cord 36in 0U
|
Tripp Lite Clamp-On Power Strip Holder Black - Clamps to your desktop or workstation to provide easy access to AC and USB power where you most need it.
|
Tripp Lite Clamp-On Power Strip Holder White - Clamps to your desktop or workstation to provide easy access to AC and USB power where you most need it.
|
PDU Metered 200V-240V 16A 32 C13; 6 C19 IEC309 Vertical 0URM
|
PDU 3-Phase 200/220/230/240V 11.5kW C13 C19 IEC309 20A Red 0U
|
****** Tripp Lite 3 phase Switched PDU / Power Distribution Unit offers advanced network control and monitoring with the ability to turn on turn off recycle or lock-out power to each individual receptacle monitor site electrical conditions and remotely monitor output power consumption per-phase or per-receptacle. PowerAlert interface supports remote control and custom notification of user-specified conditions via email secure web SNMP Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware or be custom programmed for user-defined power-up and power-down sequences to ensure proper startup of interdependent IT systems and prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps per-phase or per-receptacle can be displayed locally via visual meter or remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Highly accurate current metering offers +/-1% billing-grade current monitoring and recording ability for each output phase breakered load bank and individual outlet.
|
PDU 3-Phase Switched 240V 25.2kW C13 C19 IEC309 60A Red 0URM
|
PDU 3-Phase Switched 240V 25.2kW C13 C19 IEC309 60A Red 0URM.
|
PDU 3-Phase Switched 220V/230V 27.6kW C13 C19 IEC309 63A Red 0U
|
PDU 3-Phase Switched 220V/230V 27.6kW C13 C19 IEC309 63A Red 0U.
|
PDU 3-Phase Switched 240V 17.3kW C13 C19 L22-30P Vertical 0URM
|
PDU3VN3G30 Monitored 3 phase 208V Zero U vertical rack PDU supports 8.6kW total output capacity. Includes 3 ft. / .9m input cord with IEC-309 Blue 30A (3P+E) 208V 3 phase input plug and 36 208V outlets arranged in 3 individually breakered single phase output load banks. Each output loading bank contains 12 outlets (10 C13 and 2 C19). Visual meter with scroll button and PowerAlert remote monitoring interface enables real-time current monitoring for each output phase. Supports 0U vertical rackmount installation with included mounting accessories. Toolless button-mount installation supported in compatible racks. Included cord retention brackets keep vital network equipment plugged in and continuously powered. Tripp Lite 3 phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage frequency and load levels via secure web SNMP or Telnet interface and whole rack AC power distribution. PowerAlert interface supports custom notification of user-specified remote conditions via email secure web SNMP Telnet or SSH interface. PDU output current consumption in amps is displayed per-phase via front panel lighted digital display and can be monitored remotely to warn of potential overloads before critical IT mains breakers trip. Supports in-rack environmental and security monitoring for advanced configurations with optional ENVIROSENSE temperature / humidity probe and rack access notification for up to 4 door sensors (SRSWITCH) or other user-supplied contact-closure sensors. Lighted display with scroll-button offers power consumption in amps for all 3 loading banks IP-address self-identification and 180 degree display rotation for overhead or raised floor power feeds. Supports real-time monitoring of all reported functions with support for user-specified alarm and notification thresholds. Fully compatible with PowerAlert Network Management System / NMS Software available via FREE download from www.tripplite.com Key Features 8.6kW 3 phase 208V Monitored Power Distribution Unit (PDU) with built-in web/network interface Attached IEC-309 Blue 30A (3P+E) 208V 3 phase input plug with 3 ft. / .9m cord 0U 70 inch / 178cm vertical form factor supports installation in 2 or 4 post equipment racks 36 total 208V outlets (30 C13 6 C19) arranged in three individually breakered single phase output load banks Lighted display with scroll-button offers power consumption in amps for all 3 loading banks IP-address self-identification and 180 degree display rotation for overhead or raised floor power feeds. Built-in SNMP/ethernet interface reports voltage frequency and PDU loading per-phase via network or secure web browser interface Supports logging of all power events with user specified alarm and notification thresholds for load levels and site voltage conditions Supports in-rack environmental and security monitoring for advanced configurations with optional ENVIROSENSE temperature / humidity probe and rack access notification for up to 4 door sensors (SRSWITCH) or other user-supplied contact-closure sensors. DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card or manually assigned a static IP addresses 10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network Real-time clock backup maintains the time of day and date even if the PDU is shut down and unpowered Tiered access privileges allow an administrator and a guest to log into the web browser for monitoring all PDUs Alert notifications via email or SNMP traps give users the added advantage of having an immediate event notification Firmware upgrade ability supports future product enhancements. Protocols supported include HTTP HTTPS PowerAlert Network Management System SMTP SNMPv1 SNMPv2 Telnet SSH FTP DHCP BOOTP NTP Fully compatible with PowerAlert Network Management System / NMS Software available via FREE download from www.tripplite.com Included cord retention brackets keep vital network equipment plugged in and continuously powered Toolless mounting supported in button-mount compatible racks plus nut-and-bolt mounting brackets for other mounting applications Typical Applications Ideal for 3 phase network configurations in datacenters and heavily configured equipment racks Package Includes Monitored Rackmount PDU with pre-installed mounting buttons Cord retention brackets Rack mounting brackets Owner's manual
|
PDU3VSR10L1520 Switched 3 phase 208V Zero U vertical rack PDU supports 5.7kW total output capacity. Includes 10 ft. / 3m input cord with NEMA L15-20P 20A (3P+E) 208V 3 phase input plug and 24 individually controllable outlets arranged in 3 single phase output load banks. Each single-phase output loading bank contains 8 outlets (7 C13 1 C19). Visual meter with scroll button and PowerAlert remote monitoring interface enables real-time current monitoring for each output phase or individual receptacle. Supports 0U vertical rackmount installation with included mounting accessories. Toolless button-mount installation supported in compatible racks. Included cord retention brackets keep vital network equipment plugged in and continuously powered. Tripp Lite 3 phase Switched PDU / Power Distribution Unit enables a variety of advanced network control and monitoring functions by giving IT managers the ability to turn on turn off recycle or lock-out power to each individual receptacle monitor site electrical conditions and remotely monitor output power consumption per-phase or even per-receptacle. PowerAlert interface supports custom notification and control of user-specified remote conditions via email secure web SNMP Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware or be custom programmed per user-defined power-up and power-down sequences to ensure proper operation of interdependent IT systems and prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent powering of unauthorized hardware. PDU output current consumption in amps per-phase or per-receptacle can be displayed locally via visual meter and can be monitored via the web/network interface with user-defined alarms to warn of potential overloads before critical IT mains or branch breakers trip. Supports in-rack environmental and security monitoring for advanced configurations with optional ENVIROSENSE temperature / humidity probe and rack access notification for up to 4 door sensors (SRSWITCH) or other user-supplied contact-closure sensors. Lighted display with scroll-button offers power consumption in amps for each phase or receptacle IP-address self-identification and 180 degree display rotation for overhead or raised floor power feeds. Supports real-time monitoring of all reported functions with support for user-specified alarm and notification thresholds. Fully compatible with PowerAlert Network Management System / NMS Software available via FREE download from www.tripplite.com Key Features 5.7kW 3 phase 208V Switched Power Distribution Unit (PDU) with built-in web/network interface Attached NEMA L15-20P 20A (3P+E) 20A 208V 3 phase input plug with 10 ft. / 3m cord 0U 70 inch / 178cm vertical form factor supports installation in 2 or 4 post equipment racks 24 individually controllable 208V outlets (21 C13 3 C19) arranged in 3 single phase output load banks Offers the ability to turn on turn off recycle and lock-out power to each individual receptacle and remotely monitor output power consumption per-phase or per-outlet via email secure web SNMP or Telnet interface Real-time power control enables real-time remote-reboot of unresponsive network hardware or to power-off unnecessary network hardware Programmable power control can enable user-defined power-up power-down outlet sequences to ensure proper operation of interdependent IT systems prevent inrush-related overloads as network equipment is first energized or lock-out power to unused PDU outlets to prevent powering of unauthorized network hardware Lighted display with scroll-button offers power consumption in amps for all 3 loading banks IP-address self-identification and 180 degree display rotation for overhead or raised floor power feeds Built-in SNMP/ethernet interface reports voltage frequency and PDU loading per-phase and per receptacle via network or secure web browser interface Supports logging of all power events with user specified alarm and notification thresholds for load levels and site voltage conditions Supports in-rack environmental and security monitoring for advanced configurations with optional ENVIROSENSE temperature / humidity probe and rack access notification for up to 4 door sensors (SRSWITCH) or other user-supplied contact-closure sensors DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card or manually assigned a static IP addresses 10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network Real-time clock backup maintains the time of day and date even if the PDU is shut down and unpowered Tiered access privileges allow an administrator and a guest to log into the web browser for monitoring all PDUs Alert notifications via email or SNMP traps give users the added advantage of having an immediate event notification Firmware upgradeability supports future product enhancements Protocols supported include HTTP HTTPS PowerAlert Network Management System SMTP SNMPv1 SNMPv2 Telnet SSH FTP DHCP BOOTP NTP Fully compatible with PowerAlert Network Management System / NMS Software available via FREE download from www.tripplite.com Included cord retention brackets keep vital network equipment plugged in and continuously powered Toolless mounting supported in button-mount compatible racks plus nut-and-bolt mounting brackets for other mounting applications Typical Applications Ideal for 3 phase network configurations in datacenters and heavily configured equipment racks Package Includes Switched rackmount PDU with pre-installed mounting buttons Cord retention brackets Rack mounting brackets Owner's manual
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |