RoadPro Stainless Steel CB Antenna Stud with SO-239 Connector has been designed to handle large and heavier antenna with ease. The stainless stud offers heavy-duty mounting capabilities that can be depended on.
|
The heavy-duty stainless steel CB antenna spring fits most fiberglass CB antennas up to 5-feet with standard 3|8-inch x 24 thread fitting reducing antenna vibration. Product dimensions (Height and Depth) 3.5-inch x 1-inch.
|
Wilson replacement CB antenna whip for T2000 and T5000 series antennas with a 49-inch stainless steel tapered whip with tip.
|
This stainless steel 3|8 inch antenna stud has a chrome plated lug connector
|
Your antenna will be sturdy and secure with this heavy-duty stainless steel antenna stud. Designed for quick and easy installation it(TM)ll have you ready for the road (TM) fast!
|
12 Volt power plug with positive and negative brass push posts for easy installation. Works with any 12 Volt vehicle socket or accessory outlet and has 12 Volt DC 10 Amp output with fused plug
|
Extra heavy-duty stainless steel assembly stud with SO239 plug to plug type connection.
|
The Wilson 4 foot Silver Load FGT Series fiberglass whip in black features Wilsons tunable tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
The Wilson 3 foot Silver Load FGT Series fiberglass whip in white features Wilsons tunable tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
This mount specific for magnetic mount antennas provides a mounting base that easily works with a standard 3/8 .in mounting hole. Plated for corrosion protection the flat mount is perfect for trucks RV's and marine applications and can also be used with magnetic style satellite antennas.
|
This platinum series 2 foot black fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
A universal design works with all satellite radio services and has a stainless steel mirror mount and a 21 foot military specification RG-58U cable with gold plated connectors and a hermetically sealed antenna. Frequency: 2320.0 to 2345.0MHz. Satellite Gain: 5dB ice Typical / Terrestrial Gain: -1dB ice Typical. Noise Figure: 1.0dB Max. Current consumption: 45mA Typical/55mA Maximum. Supply voltage: 4.7-Volts Typical. Operating temperature: -40-F to 220-F. Feature:
|
This platinum series 3 foot black fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
The T2000 Series mobile CB trucker antenna with 10-inch shaft in white with an American flag design has a 49-inch stainless steel whip rated at 3500 Watts. Standard 3/8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
This antenna 3|8-inch x 24 maxi stud with SO-239 connector has heavy-duty stainless steel construction and is specially designed for larger CB radios satellite radio and 10-meter radio antennas.
|
The Wilson 3 foot Silver Load FGT Series fiberglass whip in black features Wilsons Tunable Tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
This CB antenna magnet mount kit features a 12-inch Rubber Duckie whip and a 17-foot RG58U coax cable with a PL-259 connector and is perfect for all 27 MHZ CB transceivers. It has frequency coverage of 26.965 to 27.405 MHZ. The heavy-duty 3-inch magnetic base has an attached 17-foot coaxial cable.
|
The gum drop CB antenna stud is made of ABS material and has a SO-239 connector for plug to plug hook-up. Specifically designed for surface or roof mount applications and can be used with Wilson and heavy shaft oil can type antennas.
|
This platinum series 2 foot white fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
This 5 in. super strong magnet with non corrosive black anodized finish is pre-wired and sealed to prevent corrosion. It can be used with antennas up to 4 ft.
|
This platinum series 4 foot black fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
The aluminum CB antenna mount with gum drop stud is specifically designed for Wilson and heavy shaft coil type antennas. Made of aircraft quality aluminum with stainless steel hardware and an ABS material stud it also has a SO-239 connector for plug to plug hook-up.
|
Designed for trucks and RVs. Works with select Carryout, Pathway X1, and Playmaker antenna models. Whether youGC0re on a break during a long-haul trip or tailgating with friends, sometimes you need to elevate your antenna to avoid obstructions. less restricted satellite look angle compared to a ground-level setup. Hang the mount to a roll-down window or attach it to the side of your vehicle using the included exterior bracket. Plus, multi-point leveling with dual-bumper stability gives you added height, balance, and security. Works with Carryout G2, G2+, and G3, as well as Pathway X1 and Playmaker (PL-7000, PL7000R, PL-8000, PL8000R, PL-8035, and PL8035R models). Designed for temporary use only while vehicle is parked. Mount must be removed prior to transit.
|
4' Flexible Silver Load Series CB antenna fiberglass whip with .in Tunable Tip .in allows for fine tuning SWR resonant frequency. The 200 Watt antenna whip with 1/4 .in diameter tapered fiberglass construction has a chromed brass ferrule and standard 3/8 .in x24 threads. In an exclusive dark gray color and 22-gauge silver plated wire to provide higher efficiency the unique ground lead helps to insure reduced static and ignition interference and has a static reducing weather cap.
|
This platinum series 3 foot white fiberglass CB antenna whip has a 16-gauge copper wire for handling 1000 Watts. It features a UV protected anti-static PVC jacket and is top loaded and helically wound.
|
This platinum series dual mirror mount CB antenna kit features 16-gauge copper wire for handling 1000 Watts with maximum output and reception. The coax cable is hermetically sealed for extra protection with a UV protected anti-static black PVC jacket. It has a 100% non-corrosive clear anodized mount with stainless steel hardware. The kit includes two 3 foot black antennas two mounts and an a 18 foot coax cable.
|
Rayzar digital TV antennas are capable of receiving both VHF and UHF signal from up to 50 miles away. Receive free over-the-air programming having more options and more channels than ever before! Watch local news and weather live sports and all of the top-rated shows. New multi-cast channels offer free movie channels and more! Optimized for digital television signals to provide maximum free programming available in any area. Winegard Rayzar antennas are perfect for Pop-Up Campers RVs Tailgating Trucking and more.
|
|
This Procomm heavy duty stainless steel antenna spring with 3/8"-24" threads is designed to support heavy antennas or flags. Rust free construction will provide years of service. Bulk
|
|
|
Leatherman's best-selling multi-tool, now redesigned. Larger knives, stronger pliers, longer wire cutters and all-locking blades make the new Wave an essential piece of equipment for outdoor enthusiasts and professionals. Manufactured from stainless steel, Wave incorporates a large bit driver - switch bits for a customized tool that meets all of your challenges for the day. Larger knives with bigger thumbholes can be opened easily with one hand. And scissors strong enough to cut cloth, plastic and paper. Protected under Leatherman's 25-year warranty.
- Needlenose Pliers - Regular Pliers - Wire Cutters - Hard-Wire Cutters - Clip-Point Knife - Serrated Knife - Saw - Scissors - Wood/Metal File - Diamond Coated File - Large Bit Driver - Small Bit Dirver - Large Screwdriver - Ruler (8 in/19 cm) - Bottle/Can Opener - Wire Stripper - Lanyard Attachment |
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |