Power your Arduino with a 9V Battery.
|
1 x AA Battery
1 x AA Battery Holder 1 x 9V Battery 1 x 9V Battery Holder |
Hold a coincell battery on a breadboard!
|
Overview:
* [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price! * [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns. * [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors. * [SERVO TESTER] Includes 3 modes to test servo motors or ESC * [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects Kit Contents: * 1 x 9G Servo Motor * 1 x Servo Tester * 1 x Servo Horns + Screws * 1 x 4-AA Battery Holder with Connector (6V) * 1 x Instructional Card SCHOOL & INSTITUTIONAL ORDERS -- We accept purchase orders! Please email order@barnabasrobotics.com for a quote & invoicing terms. |
Single/1x AA Battery Holder with flying wire leads
AA Battery Holder with stripped wires on both ends Cable Length = 10 cm Perfect for DIY, STEM, Robotics projects |
6V Battery Holder (4 x AA Batteries) with power connector
Holds 4 x AA Batteries Futaba style female connector Includes 15 cm long leads and header for servo motor tester 3-pin Header with 2.54 mm spacing Power and GND pins crimped Great for servo tester, robotics or any hobby projects Great for tester servos on RC cars, toys and helicopters |
6V Battery Holder (4 x AA Batteries) with power connector
Holds 4 x AA Batteries Futaba style female connector Includes 15 cm long leads and header for servo motor tester 3-pin Header with 2.54 mm spacing Power and GND pins crimped Great for servo tester, robotics or any hobby projects Great for tester servos on RC cars, toys and helicopters |
6V Battery Holder (4 x AA Batteries) with power connector
Holds 4 x AA Batteries Futaba style female connector Includes 15 cm long leads and header for servo motor tester 3-pin Header with 2.54 mm spacing Power and GND pins crimped Great for servo tester, robotics or any hobby projects Great for tester servos on RC cars, toys and helicopters |
Single/1X AA DIY Battery Holder Case Box Base 1.5V With Female 0.1" Connectors
AA Battery Holder with convenient connectors Includes 0.1" (2.54 mm) female connectors Cable Length = 12 cm Perfect for DIY, STEM, Robotics projects Connects with standard male Arduino wires Great for breadboard projects. |
Single/1X AA DIY Battery Holder Case Box Base 1.5V With Female 0.1" Connectors
AA Battery Holder with convenient connectors Includes 0.1" (2.54 mm) female connectors Cable Length = 12 cm Perfect for DIY, STEM, Robotics projects Connects with standard male Arduino wires Great for breadboard projects. |
Single/1X AA DIY Battery Holder Case Box Base 1.5V With Female 0.1" Connectors
AA Battery Holder with convenient connectors Includes 0.1" (2.54 mm) female connectors Cable Length = 12 cm Perfect for DIY, STEM, Robotics projects Connects with standard male Arduino wires Great for breadboard projects. |
Single/1X AA DIY Battery Holder Case Box Base 1.5V With Male 0.1" Connectors
AA Battery Holder with convenient connectors Includes 0.1" (2.54 mm) male connectors Cable Length = 10 cm Perfect for DIY, STEM, Robotics projects Connects with standard female Arduino wires Great for breadboard projects. Connects directly to a breadboard! |
Single/1X AA DIY Battery Holder Case Box Base 1.5V With Male 0.1" Connectors
AA Battery Holder with convenient connectors Includes 0.1" (2.54 mm) male connectors Cable Length = 10 cm Perfect for DIY, STEM, Robotics projects Connects with standard female Arduino wires Great for breadboard projects. Connects directly to a breadboard! |
Single/1x AA Battery Holder with flying wire leads
AA Battery Holder with stripped wires on both ends Cable Length = 10 cm Perfect for DIY, STEM, Robotics projects |
Single/1X AA DIY Battery Holder Case Box Base 1.5V With Male 0.1" Connectors
AA Battery Holder with convenient connectors Includes 0.1" (2.54 mm) male connectors Cable Length = 10 cm Perfect for DIY, STEM, Robotics projects Connects with standard female Arduino wires Great for breadboard projects. Connects directly to a breadboard! |
5 x AA Battery Holder 7.5V with 2.1mm DC Jack for Arduino
Fits 5 x AA Batteries (7.5V) Perfect for powering Arduino 5V regulator Includes 2.1mm round connector Wire length = 14 cm |
6V Battery Holder (4 x AA Batteries) with power connector
Holds 4 x AA Batteries Futaba style female connector Includes 15 cm long leads and header for servo motor tester 3-pin Header with 2.54 mm spacing Power and GND pins crimped Great for servo tester, robotics or any hobby projects Great for tester servos on RC cars, toys and helicopters |
Single/1x AA Battery Holder with flying wire leads
AA Battery Holder with stripped wires on both ends Cable Length = 10 cm Perfect for DIY, STEM, Robotics projects |
SBR-45LI 3200mAh Battery for HX400 The Standard Horizon SBR-45LI is the replacement battery for Standard Horizon HX400 Series Handheld VHF Marine Radios. |
Battery Terminal Mount BusBars
Easy to install. Specifications:
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
|
Battery Voltage Protector Waterproof 200 Amps. Prevents excessive discharge of batteries. Can be set to connect/disconnect at several different voltages. Prevents damage to connected components. Protects against excessive voltage caused by faulty alternators or chargers.
|
Prevents excessive discharge of batteries. Can be set to connect/disconnect at several different voltages with jumpers. Prevents damage to connected components. Protects against excessive voltage caused by faulty alternators or chargers.
|
|
N20V Li-Ion power tool batteryN 5mAhN Provides up to 60% more capacity than standard 20V max battery packsN3 LED fuel gauge allows immediate feedback on state of chargeN Compatible with the entire line of 20V max toolsN Weight: 1.4lbs
|
SmartShunt 1000A/50MV IP65 Bluetooth Battery Monitor The Smart Battery Shunt The SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information, and much more. Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter are wanted. The SmartShunt is equipped with Bluetooth and a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring, or a temperature sensor. Please contact your dealer for any returns, repairs or support issues related to this product. |
|
ML-RBS Remote Battery Switch with Manual Control Auto-Release - 12V
Auto Releasing ML-Series Remote Battery Switch with SPST Switching Provides 500A switching and features of current ML Remote Battery Switches, but can be controlled with SPST or SPDT switch for applications where a normally open relay is desired Specifications Control Circuit Connection:Tinned Wire Nominal Voltage:12V DC Coil Function: Auto releasing Mounting: #10 Amperage Operating Current:8mA when OFF/13mA when ON Amperage Operating Current when changing state: <7A (40 ms) Control Circuit Voltage: 10.1 to 16.5V DC Continuous Rating: 500A Intermittent Rating: 700A (5 min) Cranking Rating: 10 sec 2500A Cranking Rating: 1 min 1100A Minimum Operating Temperature: -10° C Maximum Operating Temperature: 50° C Cable Size to Meet Ratings: 2x (4/0) Live Current Switching: 300A @ 12V DC 10,000 Cycles Master Control Switch Capability: Yes Mechanical Endurance: 100,000 Cycles Switching Cycles: 100,000 Terminal Ring Diameter Clearance: 1.18" (29.97mm) Terminal Stud Length: 0.875" (22.23mm) Terminal Stud Size: 3/8-16 (M10) Terminal Stud Torque: 140 in-lb (15.82 Nm) Weight: 1.75lb (0.79 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
TA118 2-up battery pack and seal kit
|
6008 M-Series Battery Switch 3 Position - Red Switches a single battery to a single load group. Features:
Specifications:
|
Satin nickel plated positive battery terminal. Provides outputs for dual 1|0 or 4 gauge and two 8 gauge wire.
|
SBR-45LIIS Battery for HX400IS The Standard Horizon SBR-45LIIS is the replacement battery for Standard Horizon HX400IS Series Handheld VHF Marine Radios. |
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |