Items 1- 32 of 157 total

Briggs-Stratton Engine Parts ARMATURE-MAGNETO-COIL Solid State fits 5hp engines 130200 132200 135200 135200 Briggs-Stratton Engine Parts ARMATURE-MAGNETO-COIL Solid State fits 5hp engines 130200 132200 135200 135200
Online
$50.29 for Each
Retail $75.92
Mfr PN: 397358
Stock: 7
Product No: BS-397358
Made by: Briggs-Stratton
Manufacturer Part No: 397358

Shipping Weight: 2 Pounds
Condition: New
Warranty: No Returns on Electrical Items
Online
$50.29 for Each
Retail $75.92
Mfr PN: 397358
Stock: 7

BROWNING V BELT, 4L230, 1/2 X 23 IN. BROWNING V BELT, 4L230, 1/2 X 23 IN.
Online
$36.48 for 6 Each
Retail $54.72
Mfr PN: 4L230
Stock: 0
Wrapped construction provides smooth, quiet operation. | Formulated for maximum flexibility with smaller diameter sheaves. | Oil and heat resistant. Static conducting
Online
$36.48 for 6 Each
Retail $54.72
Mfr PN: 4L230
Stock: 0

Motor Termination Splice Kits #4-4/0 Motor Termination Splice Kits #4-4/0
Online
$72.01 for Each
Retail $94.56
Mfr PN: 67034
Stock: 5
#4 - 4/0 Motor Termination Stub Splice Kits for Butt/Stub Motor Hook-Up Applications.

#4 - 4/0 Motor Termination Stub Splice Kit Features include:

  • Fast Easy Installation/Removal for Motor Maintenance/Change-Outs
  • Heat Shrink Cap/Tubing & Mastic Sealant Combine for Excellent Environmental Seal
  • Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, Cable Failure and Provides Corona Relief Effect
  • Stub/Butt/Branch Splicing Applications
  • 600V Rated for Primary Insulation
  • Normal Service Operating Temperature Range: -67°F to 220°F(-55°C to 110°C)
  • Kit Includes: 3 Heat Shrink End Cap Sleeves, 3 Rubber Mastic Tape Strips, 3 Protective Friction Tape Strips - Hardware Not Included
  • Order Qty of 1 = 1 Piece

Below is more info on our #4 - 4/0 Motor Termination Stub Splice Kits

Conductor Range: #4 - 4/
Splice Type: Stub
A Dimension: 1."
L Dimension: 3.5"
Heat Shrink Length: 4.5"
Bag Qty: 1
Case Qty: 5 This item does not ship to APO/FPO addresses.
Online
$72.01 for Each
Retail $94.56
Mfr PN: 67034
Stock: 5

Motor Termination Splice Kits #8-4/0 Motor Termination Splice Kits #8-4/0
Online
$73.02 for Each
Retail $95.90
Mfr PN: 67036
Stock: 4
#8- 4/0 Motor Termination Splice Kits for In-Line Motor Hook-Up Applications.

#8 - 4/0 Motor Termination In-Line Splice Kit Features include:

  • Fast Easy Installation/Removal for Motor Maintenance/Change-Outs
  • Heat Shrink Cap/Tubing & Mastic Sealant Combine for Excellent Environmental Seal
  • Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, Cable Failure and Provides Corona Relief Effect
  • Stub/Butt/Branch Splicing Applications
  • 600V Rated for Primary Insulation
  • Normal Service Operating Temperature Range: -67°F to 220°F(-55°C to 110°C)
  • Kit Includes: 3 Heat Shrink End Cap Sleeves, 3 Rubber Mastic Tape Strips, 3 Protective Friction Tape Strips - Hardware Not Included
  • Order Qty of 1 = 1 Piece

Below is more info on our #8 - 4/0 Motor Termination In-Line Splice Kits

Conductor Range: #8 - 4/
Splice Type: In-Line
A Dimension: 1.25"
L Dimension: 5."
Heat Shrink Length: 9."
Bag Qty: 1
Case Qty: 5 This item does not ship to APO/FPO addresses.
Online
$73.02 for Each
Retail $95.90
Mfr PN: 67036
Stock: 4

Motor Termination Splice Kits 250-1000 Motor Termination Splice Kits 250-1000
Online
$116.69 for Each
Retail $151.74
Mfr PN: 67037
Stock: 3
250 - 1000 MCM Motor Termination Splice Kits for In-Line Motor Hook-Up Applications.

250 - 1000 MCM Motor Termination In-Line Splice Kit Features include:

  • Fast Easy Installation/Removal for Motor Maintenance/Change-Outs
  • Heat Shrink Cap/Tubing & Mastic Sealant Combine for Excellent Environmental Seal
  • Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, Cable Failure and Provides Corona Relief Effect
  • Stub/Butt/Branch Splicing Applications
  • 600V Rated for Primary Insulation
  • Normal Service Operating Temperature Range: -67°F to 220°F(-55°C to 110°C)
  • Kit Includes: 3 Heat Shrink End Cap Sleeves, 3 Rubber Mastic Tape Strips, 3 Protective Friction Tape Strips - Hardware Not Included
  • Order Qty of 1 = 1 Piece

Below is more info on our 250 - 1000 MCM Motor Termination In-Line Splice Kits

Conductor Range: 25 - 1 MCM
Splice Type: In-Line
A Dimension: 1.5"
L Dimension: 8."
Heat Shrink Length: 12."
Bag Qty: 1
Case Qty: 5 This item does not ship to APO/FPO addresses.
Online
$116.69 for Each
Retail $151.74
Mfr PN: 67037
Stock: 3

Motor Termination Splice Kits 4/0-500 Motor Termination Splice Kits 4/0-500
Online
$107.37 for Each
Retail $140.98
Mfr PN: 67035
Stock: 3
4/0 - 500 MCM Motor Termination Splice Kits for Butt/Stub Motor Hook-Up Applications.

4/0 - 500 MCM Motor Termination Stub Splice Kit Features include:

  • Fast Easy Installation/Removal for Motor Maintenance/Change-Outs
  • Heat Shrink Cap/Tubing & Mastic Sealant Combine for Excellent Environmental Seal
  • Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, Cable Failure and Provides Corona Relief Effect
  • Stub/Butt/Branch Splicing Applications
  • 600V Rated for Primary Insulation
  • Normal Service Operating Temperature Range: -67°F to 220°F(-55°C to 110°C)
  • Kit Includes: 3 Heat Shrink End Cap Sleeves, 3 Rubber Mastic Tape Strips, 3 Protective Friction Tape Strips - Hardware Not Included
  • Order Qty of 1 = 1 Piece

Below is more info on our 4/0 - 500 MCM Motor Termination Stub Splice Kits

Conductor Range: 4/ - 5 MCM
Splice Type: Stub
A Dimension: 1.5"
L Dimension: 5.5"
Heat Shrink Length: 5."
Bag Qty: 1
Case Qty: 5 This item does not ship to APO/FPO addresses.
Online
$107.37 for Each
Retail $140.98
Mfr PN: 67035
Stock: 3

Motor Termination Splice Kits #14-#8 Motor Termination Splice Kits #14-#8
Online
$47.37 for Each
Retail $62.20
Mfr PN: 67032
Stock: 3

#14 - #8 Motor Termination Splice Kits for Stub Motor Hook-Up Applications.

#14 - #8 Motor Termination Stub Splice Kit Features include:

  • Fast Easy Installation/Removal for Motor Maintenance/Change-Outs
  • Heat Shrink Cap/Tubing & Mastic Sealant Combine for Excellent Environmental Seal
  • Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, Cable Failure and Provides Corona Relief Effect
  • Stub/Butt/Branch Splicing Applications
  • 600V Rated for Primary Insulation
  • Normal Service Operating Temperature Range: -67°F to 220°F(-55°C to 110°C)
  • Kit Includes: 3 Heat Shrink End Cap Sleeves, 3 Rubber Mastic Tape Strips, 3 Protective Friction Tape Strips - Hardware Not Included
  • Order Qty of 1 = 1 Piece

Below is more info on our #14 - #8 Motor Termination Stub Splice Kits

Conductor Range: #14 - #8
Splice Type: Stub
A Dimension: .625"
L Dimension: 2."
Heat Shrink Length: 3.5"
Bag Qty: 1
Case Qty: 5 This item does not ship to APO/FPO addresses.
Online
$47.37 for Each
Retail $62.20
Mfr PN: 67032
Stock: 3

Motor Termination Splice Kits #8-#2 Motor Termination Splice Kits #8-#2
Online
$49.50 for Each
Retail $65.00
Mfr PN: 67033
Stock: 1
#8 - #2 Motor Termination Splice Kits forButt/ Stub Motor Hook-Up Applications.

#8 - #2 Motor Termination Stub Splice Kit Features include:

  • Fast Easy Installation/Removal for Motor Maintenance/Change-Outs
  • Heat Shrink Cap/Tubing & Mastic Sealant Combine for Excellent Environmental Seal
  • Permanent Watertight Seal Protects against Voltage Leakage, Cable Deterioration, Cable Failure and Provides Corona Relief Effect
  • Stub/Butt/Branch Splicing Applications
  • 600V Rated for Primary Insulation
  • Normal Service Operating Temperature Range: -67°F to 220°F(-55°C to 110°C)
  • Kit Includes: 3 Heat Shrink End Cap Sleeves, 3 Rubber Mastic Tape Strips, 3 Protective Friction Tape Strips - Hardware Not Included
  • Order Qty of 1 = 1 Piece

Below is more info on our #8 - #2 Motor Termination Stub Splice Kits

Conductor Range: #8 - #2
Splice Type: Stub
A Dimension: .75"
L Dimension: 2.5"
Heat Shrink Length: 4."
Bag Qty: 1
Case Qty: 5 This item does not ship to APO/FPO addresses.
Online
$49.50 for Each
Retail $65.00
Mfr PN: 67033
Stock: 1

BROWNING V BELT, B40, 21/32 X 43 IN. BROWNING V BELT, B40, 21/32 X 43 IN.
Online
$44.16 for 4 Each
Retail $66.24
Mfr PN: B40
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.16 for 4 Each
Retail $66.24
Mfr PN: B40
Stock: 0

BROWNING V BELT, A34, 1/2 X 36 IN. BROWNING V BELT, A34, 1/2 X 36 IN.
Online
$43.14 for 4 Each
Retail $64.71
Mfr PN: A34
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$43.14 for 4 Each
Retail $64.71
Mfr PN: A34
Stock: 0

BROWNING V BELT, A35, 1/2 X 37 IN. BROWNING V BELT, A35, 1/2 X 37 IN.
Online
$43.14 for 4 Each
Retail $64.71
Mfr PN: A35
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$43.14 for 4 Each
Retail $64.71
Mfr PN: A35
Stock: 0

BROWNING V BELT, AX24, 1/2 X 26 IN. BROWNING V BELT, AX24, 1/2 X 26 IN.
Online
$34.40 for 3 Each
Retail $51.60
Mfr PN: AX24
Stock: 0
Utilize "ground form" design which reduces vibration, wear and initial belt tension loss. | Greater belt sidewall gives more sheave contact. | Notched belts are more efficient, run cooler and can run in smaller pitch diameters sheaves. | Browning CODE 1 match tolerance | Oil and heat resistant Static conducting
Online
$34.40 for 3 Each
Retail $51.60
Mfr PN: AX24
Stock: 0

BROWNING V BELT, A46, 1/2 X 48 IN. BROWNING V BELT, A46, 1/2 X 48 IN.
Online
$38.98 for 4 Each
Retail $58.47
Mfr PN: A46
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$38.98 for 4 Each
Retail $58.47
Mfr PN: A46
Stock: 0

BROWNING V BELT, A52, 1/2 X 54 IN. BROWNING V BELT, A52, 1/2 X 54 IN.
Online
$36.58 for 4 Each
Retail $54.87
Mfr PN: A52
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$36.58 for 4 Each
Retail $54.87
Mfr PN: A52
Stock: 0

BROWNING V BELT, A22, 1/2 X 24 IN. BROWNING V BELT, A22, 1/2 X 24 IN.
Online
$34.24 for 6 Each
Retail $51.36
Mfr PN: A22
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$34.24 for 6 Each
Retail $51.36
Mfr PN: A22
Stock: 0

BROWNING V BELT, 4L410, 1/2 X 41 IN. BROWNING V BELT, 4L410, 1/2 X 41 IN.
Online
$41.26 for 5 Each
Retail $61.89
Mfr PN: 4L410
Stock: 0
Wrapped construction provides smooth, quiet operation. | Formulated for maximum flexibility with smaller diameter sheaves. | Oil and heat resistant. Static conducting
Online
$41.26 for 5 Each
Retail $61.89
Mfr PN: 4L410
Stock: 0

ROUND MOTOR RUN CAPACITOR, 45/5 MFD, 370 VAC ROUND MOTOR RUN CAPACITOR, 45/5 MFD, 370 VAC
Online
$43.52 for 3 Each
Retail $65.28
Mfr PN: 503105
Stock: 0
Hermetically Sealed, Drawn Steel Case and Template
Online
$43.52 for 3 Each
Retail $65.28
Mfr PN: 503105
Stock: 0

BROWNING V BELT, 4L240, 1/2 X 24 IN. BROWNING V BELT, 4L240, 1/2 X 24 IN.
Online
$36.48 for 6 Each
Retail $54.72
Mfr PN: 4L240
Stock: 0
Wrapped construction provides smooth, quiet operation. | Formulated for maximum flexibility with smaller diameter sheaves. | Oil and heat resistant. Static conducting
Online
$36.48 for 6 Each
Retail $54.72
Mfr PN: 4L240
Stock: 0

BROWNING V BELT, 4L250, 1/2 X 25 IN. BROWNING V BELT, 4L250, 1/2 X 25 IN.
Online
$36.48 for 6 Each
Retail $54.72
Mfr PN: 4L250
Stock: 0
Wrapped construction provides smooth, quiet operation. | Formulated for maximum flexibility with smaller diameter sheaves. | Oil and heat resistant. Static conducting
Online
$36.48 for 6 Each
Retail $54.72
Mfr PN: 4L250
Stock: 0

BROWNING V BELT, A39, 1/2 X 41 IN. BROWNING V BELT, A39, 1/2 X 41 IN.
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A39
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A39
Stock: 0

BROWNING V BELT, A40, 1/2 X 42 IN. BROWNING V BELT, A40, 1/2 X 42 IN.
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A40
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A40
Stock: 0

BROWNING V BELT, A47, 1/2 X 49 IN. BROWNING V BELT, A47, 1/2 X 49 IN.
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A47
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A47
Stock: 0

BROWNING V BELT, A23, 1/2 X 25 IN. BROWNING V BELT, A23, 1/2 X 25 IN.
Online
$34.82 for 4 Each
Retail $52.23
Mfr PN: A23
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$34.82 for 4 Each
Retail $52.23
Mfr PN: A23
Stock: 0

BROWNING V BELT, A26, 1/2 X 28 IN. BROWNING V BELT, A26, 1/2 X 28 IN.
Online
$34.98 for 4 Each
Retail $52.47
Mfr PN: A26
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$34.98 for 4 Each
Retail $52.47
Mfr PN: A26
Stock: 0

BROWNING V BELT, A42, 1/2 X 44 IN. BROWNING V BELT, A42, 1/2 X 44 IN.
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A42
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A42
Stock: 0

BROWNING V BELT, A58, 1/2 X 60 IN. BROWNING V BELT, A58, 1/2 X 60 IN.
Online
$44.96 for 3 Each
Retail $67.44
Mfr PN: A58
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.96 for 3 Each
Retail $67.44
Mfr PN: A58
Stock: 0

BROWNING V BELT, A48, 1/2 X 50 IN. BROWNING V BELT, A48, 1/2 X 50 IN.
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A48
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A48
Stock: 0

BROWNING V BELT, AX35, 1/2 X 37 IN. BROWNING V BELT, AX35, 1/2 X 37 IN.
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: AX35
Stock: 0
Utilize "ground form" design which reduces vibration, wear and initial belt tension loss. | Greater belt sidewall gives more sheave contact. | Notched belts are more efficient, run cooler and can run in smaller pitch diameters sheaves. | Browning CODE 1 match tolerance | Oil and heat resistant Static conducting
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: AX35
Stock: 0

BROWNING V BELT, AX31, 1/2 X 33 IN. BROWNING V BELT, AX31, 1/2 X 33 IN.
Online
$42.16 for 3 Each
Retail $63.24
Mfr PN: AX31
Stock: 0
Utilize "ground form" design which reduces vibration, wear and initial belt tension loss. | Greater belt sidewall gives more sheave contact. | Notched belts are more efficient, run cooler and can run in smaller pitch diameters sheaves. | Browning CODE 1 match tolerance | Oil and heat resistant Static conducting
Online
$42.16 for 3 Each
Retail $63.24
Mfr PN: AX31
Stock: 0

BROWNING V BELT, AX26, 1/2 X 28 IN. BROWNING V BELT, AX26, 1/2 X 28 IN.
Online
$42.16 for 3 Each
Retail $63.24
Mfr PN: AX26
Stock: 0
Utilize "ground form" design which reduces vibration, wear and initial belt tension loss. | Greater belt sidewall gives more sheave contact. | Notched belts are more efficient, run cooler and can run in smaller pitch diameters sheaves. | Browning CODE 1 match tolerance | Oil and heat resistant Static conducting
Online
$42.16 for 3 Each
Retail $63.24
Mfr PN: AX26
Stock: 0

BROWNING V BELT, AX29, 1/2 X 31 IN. BROWNING V BELT, AX29, 1/2 X 31 IN.
Online
$42.16 for 3 Each
Retail $63.24
Mfr PN: AX29
Stock: 0
Utilize "ground form" design which reduces vibration, wear and initial belt tension loss. | Greater belt sidewall gives more sheave contact. | Notched belts are more efficient, run cooler and can run in smaller pitch diameters sheaves. | Browning CODE 1 match tolerance | Oil and heat resistant Static conducting
Online
$42.16 for 3 Each
Retail $63.24
Mfr PN: AX29
Stock: 0

BROWNING V BELT, A51, 1/2 X 53 IN. BROWNING V BELT, A51, 1/2 X 53 IN.
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A51
Stock: 0
Unique design enhances performance and provides increased horsepower capacity in short center drives. | Single fabric design has less overlap and offers reduced vibration, greater flexibility and allows for use of smaller diameter sheaves. | Browning CODE 1 match tolerance. | Oil and heat resistant Static conducting
Online
$44.52 for 3 Each
Retail $66.78
Mfr PN: A51
Stock: 0