• Must be fully closed before tool allows itself to open ensuring a proper crimp
  
• Includes lever to release jaws mid-cycle in the event of an incorrectly placed terminal
  
• Ratcheting operation with ergonomic handle to prevent hand fatigue
  
• 4 color-coded cavities for different wire sizes
  
• Length: 10.25" (260mm)
  
• Weight: 1.3 lb (0.6kg)

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Crimps 26-10 AWG vinyl and nylon insulated terminals and connectors
  
• Must be fully closed before tool allows itself to open ensuring a proper crimp
  
• Includes lever to release jaws mid-cycle in the event of an incorrectly placed terminal
  
• Ratcheting operation with ergonomic handle to prevent hand fatigue
  
• 4 color-coded cavities for different wire sizes
  
• Length: 10.25" (260mm)
  
• Weight: 1.3 lb (0.6kg)

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Strips 26 to 10 AWG stranded wire
  
• Automatic jaw-load wire stripper self-adjusts to strip wire.
  
• Crimps 22-10 AWG insulated terminals.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Electrician's Scissors & Cable Splicer's Knife Set - Tempered Steel Electricians Scissors and knife for any job.

Electrician's Scissors & Cable Splicer's Knife Set features include:

• Cuts cable, telephone wire and strips insulation
• Tough, tempered steel knife blade holds edge longer & remains sharp
• Full-size no slip easy to grip knife handle provides greater comfort offering better control & less hand fatigue
• Knife has a short, coping-type blade made of the finest cutlery steel
• Scissors cut up to 16 guage solid & 12 guage stranded wire
• Scissors have an upper blade with two stripping notches to strip most insulations from 19-24 AWG
• Order Qty of 1 = 1 Set

Below is more info on our Electrician's Scissors & Cable Splicer's Knife Set

Controlled Cycle Non-Insulated Terminal Crimp Tool #22 - #8 - For Crimping Non-Insulated Terminals - Ring, Fork/Spade, Butt Splice, Parallel Splice

Controlled Cycle Non-Insulated Terminal Crimp Tool #22 - #8 features include:

• For Crimping Non-Insulated Terminals - Ring, Fork/Spade, Butt, Parallel Splice Terminals
• Terminal Range: #22 - #8 Awg
• Controlled Cycle Mechanism ensures perfect crimp every time
• Ergonomic Cushion Grip Handle Design
• Safety Release Mechanism
• Order Qty of 1 = 1 Piece

Below is more info on our Controlled Cycle Non-Insulated Terminal Crimp Tool #22 - #8

500 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need.

500 Piece Terminal Kit with Controlled Cycle Crimp Tool features include:

• High impact reusable Steel Box
• 22-10 Awg Ergonomic Controlled Cycle Crimp Tool
• Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects
• Contains the following:
  • 8 pcs 10012 Ring Terminal 22-16 #6
  • 10 pcs 10014 Ring Terminal 22-16 #8
  • 8 pcs 10016 Ring Terminal 22-16 #10
  • 8 pcs 10032 Ring Terminal 16-14 #6
  • 10 pcs 10034 Ring Terminal 16-14 #8
  • 14 pcs 10036 Ring Terminal 16-14 #10
  • 10 pcs 10062 Ring Terminal 12-10#8
  • 16 pcs 10064 Ring Terminal 12-10 #10
  • 10 pcs 10066 Ring Terminal 12-10 1/4”
  • 8 pcs 10068 Ring Terminal 12-10 5/16”
  • 10 pcs 10112 Spade Terminal 22-16 #6
  • 10 pcs 10114 Spade Terminal 22-18 #8
  • 10 pcs 10116 Spade Terminal 22-18 #10
  • 10 pcs 10132 Spade Terminal 16-14 #6
  • 21 pcs 10134 Spade Terminal 16-14 #8
  • 18 pcs 10136 Spade Terminal 16-14 #10
  • 23 pcs 10162 Spade Terminal 12-10 #8
  • 40 pcs 10164 Spade Terminal 12-10 #10
  • 8 pcs 10166 Spade Terminal 12-10 1/4”
  • 28 pcs 10182 Butt Connector 22-18
  • 30 pcs 10184 Butt Connector 16-14
  • 23 pcs 10186 Butt Connector 12-10
  • 8 pcs 10214 Male Disconnect 22-16 .250
  • 10 pcs 10224 Male Disconnect 16-14 .250
  • 10 pcs 10232 Male Disconnect 12-10 .250
  • 14 pcs 10314 Female Disconnect 22-18 .250
  • 10 pcs 10322 Female Disconnect 16-14 .187
  • 28 pcs 10324 Female Disconnect 16-14 .250
  • 35 pcs 10332 Female Disconnect 12-10 .250
  • 10 pcs 10411 Female Insul Disconn 22-18 .250
  • 14 pcs 10412 Female Insul Disconn 16-14 .250
  • 10 pcs 10414 Female Insul Disconn 12-10 .250
  • 8 pcs 10415 Male Insul Disconn 22-18 .250
  • 10 pcs 10416 Male Insul Disconn 16-14 .250
• Terminals and Disconnects are cULus Listed
• Order Qty of 1 = 1 Terminal Kit

Below is more info on our 500 Piece Terminal Kit with Controlled Cycle Crimp Tool

Controlled Cycle Heat Shrink Terminal Crimp Tool #22 - #10 - For Crimping Heat Shrink Terminals and Insulated Crimp Sleeves

Controlled Cycle Heat Shrink Terminal Crimp Tool #22 - #10 features include:

• For Crimping Heat Shrink Terminals and Insulated Crimp Sleeves
• Terminal Range: #22 - #10 Awg
• Controlled Cycle Mechanism ensures perfect crimp every time
• Ergonomic Cushion Grip Handle Design
• Safety Release Mechanism
• Order Qty of 1 = 1 Piece

Below is more info on our Controlled Cycle Heat Shrink Terminal Crimp Tool #22 - #10

Controlled Cycle Insulated Disconnect Crimp Tool #22 - #10 - For Crimping Insulated Terminals - Male & Female Disconnects

Controlled Cycle Insulated Disconnect Crimp Tool #22 - #10 features include:

• For Crimping Insulated Terminals - Male & Female Disconnects
• Terminal Range: #22 - #10 Awg
• Controlled Cycle Mechanism ensures perfect crimp every time
• Ergonomic Cushion Grip Handle Design
• Safety Release Mechanism
• Order Qty of 1 = 1 Piece

Below is more info on our Controlled Cycle Insulated Disconnect Crimp Tool #22 - #10

Controlled Cycle Ferrule Crimp Tool #22 - #10 - For Crimping Ferrules #22 - #10

Controlled Cycle Ferrule Crimp Tool #22 - #10 features include:

• For Crimping Ferrules #22 - #10 Awg
• 22-10 Awg
• Controlled Cycle Mechanism ensures perfect crimp every time
• Ergonomic Cushion Grip Handle Design
• Safety Release Mechanism
• Order Qty of 1 = 1 Piece
• Minimum Order Qty = 1 Piece

Below is more info on our Controlled Cycle Ferrule Crimp Tool #22 - #10

Non-Insulated Terminal #6-1/0 & Insulated #8-#2 Crimp Tool - For Crimping Insulated and Non-Insulated Terminals

Non-Insulated Terminal #6-1/0 & Insulated #8-#2 Crimp Tool features include:

• Crimps Insulated and Non-Insulated Terminals Only
• Non-Insulated #6 - 1/0 and Insulated Terminals #8 - #2
• Controlled Cycle Mechanism ensures perfect crimp every time
• Ergonomic Cushion Grip Handle Design
• Safety Release Mechanism
• Order Qty of 1 = 1 Piece

Below is more info on our Non-Insulated Terminal #6-1/0 & Insulated #8-#2 Crimp Tool

Controlled Cycle Insulated Terminal Crimp Tool #22 - #10 - For Crimping Insulated Terminals - Ring, Fork/Spade, Butt Splice, Parallel Splice, Blade Type Terminals

Controlled Cycle Insulated Terminal Crimp Tool #22 - #10 features include:

• For Crimping Insulated Terminals - Ring, Fork/Spade, Butt Splice, Parallel Splice, Blade Type Terminals
• Terminal Range: #22 - #10 Awg
• Controlled Cycle Mechanism ensures perfect crimp every time
• Ergonomic Cushion Grip Handle Design
• Safety Release Mechanism
• Order Qty of 1 = 1 Piece

Below is more info on our Controlled Cycle Insulated Terminal Crimp Tool #22 - #10