Shakespeare Style 4705 Pipe Adapter
Shakespeare's Style 4705 makes an antenna mounting mast out of any 1" OD pipe. Just slip the adapter onto the pipe and attach it easily with (included) set screws.
|
This one foot tall, 1ať diameter polycarbonate extension mast with bag is designed for light to moderate duty applications. The white mast has male upper and female lower 1a-14 thread nylon ferrule. Recommended mounts: 4186 & 4186U
|
Heavy-duty stainless steel extension mast with standard 1a-14 thread male and female fittings. The Style 4700-1 is 12a long.
|
The 5911 Classic Emergency VHF antenna is a 10" tall Unity Gain Loaded 1/4-wave antenna. It is especially designed for Emergency situations, if your main antenna becomes broken or disabled. The VHF 5911 flex antenna is a boating essential. It comes packed in a 12ať weather-resistant, plastic tube which can be easily stowed away. Complete with 12 feet of coax cable & PL259 connector with rubber suction cup. Mounts quickly and easily on any smooth horizontal surface.
|
This 162" fiberglass marine mast is constructed of sturdy, light-weight fiberglass. The mast is 1-1/2" diameter with chrome plated brass fittings, 1"-14 standard upper/lower female threads.
|
17'6"2-30MHZ 2 SECTION HF/SSB
|
18a(tm) CB Marine 7.65dB 1/2-wave antenna for work boats and large yachts. This two section antenna provides maximum performance and durability for long distance communication. Features a chrome-plated brass ferrule with standard 1a-14 thread and SO-239 connector on the side of the ferrule. Recommended mounts: 409-R & 410-R. *Truck Shippable Only*
|
This two section 19a(tm) VHF 50 watt Marine Band 9dB gain antenna features phased 1/2-wave elements in a collinear array with a coaxial choking sleeve to suppress cable radiation. The lightweight design is rigid enough to stay erect in rough seas to provide long-distance communications. Features brass and copper elements, a chrome-plated brass ferrule with 1ať-14 threads, side fed 20a(tm) RG58 coax cable and PL259 connector. Recommended mounts: 409-R & 410-R.
|
This 2a˛ VHF 3dB gain, 50 watt end-fed 1/2 Wave marine antenna was designed for rigid inflatable boats and low-profile applications. The 5415 features a black stainless steel helical whip which is designed to prevent whipping action. A solderless connector at the base provides for easy installation and removal of the 20a(tm) RG58 coax cable.
|
This 21a(tm) one section, 350 watt 50 Ohms VHF Marine Band 10dB gain commercial antenna was designed for heavy duty sea going applications, such as work boats, tugs, tidal well service boats, etc. It is also an excellent choice for use as a VHF land base station. Designed to get transmissions through by radiating the signal on the horizon, providing gain in all directions. Features phased 1/2-wave elements in a collinear array with a broadband matching section, a coaxial choking sleeve. The 2.75a diameter x 26a long 6061-T-6 aluminum sleeve can be strapped directly to a mast or wall with Shakespeare 483 clamp or 484 wall mounting brackets (not included). Constructed of brass and copper internal elements for superb durability. S0-239 connection at the antenna base. In white. Truck shippable only.
|
23' 9DB TWO PIECE VHF "OCEAN TWIN" ANT.
|
The 5309-R 2 section 23a(tm) tall Galaxy 150 watt 9db gain VHF marine band antenna features brass and copper elements to provide high performance for super clear transmit and receive with maximum range. Features the Galaxy high-quality white fiberglass non-yellowing high gloss polyurethane finish, a stainless steel ferrule with 1ať-14 threads, 20 ' of RG8-X coax cable and loose PL259 connector. Recommended mounts: 409-R, 410-R
***THIS IS A SPECIAL ORDER ITEM***
|
This 1,000 watt, 23a(tm) SSB whip antenna with conductors running full-length (no loading coil) is an award-winning performer. Features permanently sealed conductors in white fiberglass, a 6" diameter Anodized Almag 35 aluminum base flange with side feed termination & frequency 2-30 MHz with tuner (not included).
|
This 1,000 watt, 23a(tm) SSBThis 1,000 watt, 23a(tm) SSB whip antenna with conductors running full-length (no loading coil) is an award-winning performer. Features permanently sealed conductors in white fiberglass, a chrome-plated brass ferrule with standard 1ať-14 threads, side feed termination & frequency 2-30 MHz with tuner (not included). Suggested mounting kits: 409-R & 410-R.
|
The 5300 2 section 28a(tm) tall Classic SSB 1,000 watt whip antenna is designed for large commercial vessels. The whip antenna is constructed with conductors running the full length for superb performance on the entire HF marine band. Frequency 2-30 MHz with tuner (not included). Features chrome plated brass center fittings with anodized aluminum bottom ferrule, side feed termination. The 2.375ať diameter x 24ať long 6061a"T-6 anodized aluminum sleeve can be strapped directly to a mast with U clamps. Other recommended mounting brackets: 483 clamp set or 484 wall mount set.
|
This 3' "Little Giant" 25 watt CB marine antenna is designed to mount on watercraft requiring a smaller footprint. A permanetly sealed coil inside white fiberglass will provide years of trouble free service. The base has a nylon ferrule with 1"-14 threads and comes with 7 feet of coax cable, PL259 connector. Recommended mount: 4186
|
This 3' "Little Giant" 25 watt CB marine antenna kit is designed to mount on watercraft requiring a smaller footprint. A permanetly sealed coil inside white fiberglass will provide years of trouble free service. The durable Polycarbonate lift-n-lay mount enabels quick easy stoage for transporting boat or covering. Comes with 7 feet of coax cable, PL259 connector and leveling plate. Great for mounting on Bass boats & RV's.
|
This 4 inch, 4 ohm deluxe marine speaker features a Mylar cone and white plastic cabinet for ultimate protection against moisture. The ES4P features a 12 volt built-in amplifier that increases the audio level to 94dBA and improves tone and voice clairity. Separate volume and tone controls and a switchable attenuator helps prevent accidental over-driving. Comes with swivel mounting bracket, side knobs, 6' of cable with 3.5mm mini plug & 12 volt power wire. In white.
|
4' AM/FM MARINE ANTENNA
|
The 5104, Classic 50 watt, 3Db gain 4a(tm) tall vertical VHF marine antenna is constructed with brass and copper elements, a chrome plated brass ferrule with 1"-14 threads and the white antenna is coated with a durable high gloss finish to ensure lasting beauty and provide years of service. Includes 15 feet of side-fed RG58 coax cable & loose PL259 connector. Recommended mounts: 4187 or 5187
|
The 5410-XT 4' Galaxy dual band 800/900 & 1900 Mhz "Little Giant" cellular marine antenna works on digital, analog & PCS bands. A 1"-14 threaded stainless steel ferrule enables mounting flexibility. Comes with 25' RG8-X coax cable with TNC connector. Recommended mounts: 4187, 5187
|
This sturdy, lighweight extension mast is constructed with strong fiberglass with 1"-14 threaded chrome plated brass ferrules. The actual length is 50". Recommended mounting kits: 409-R or 410-R
|
This 4a(tm) tall 6396-AIS Phase III 50 watt 3db gain AIS/VHF marine band antenna is especially engineered for extra bandwidth required by AIS transcievers. Features collinear-phased 5/8 wave elements. The ethafoam spacer system and silver-plated elements enhance the antennaa(tm)s technical performance and will provide years of service. Constructed with a silver plated outer conductor and copper inner conductor with a stainless steel mounting sleeve and SO239 connector. Recommended mounts: 4187HD
***THIS IS A SPECIAL ORDER ITEM***
|
This "Little Giant" cellular marine antenna delivers exceptional performance, covering digital, analog & PCS cellular bands. Base is constructed with a special sleeve for mast mounting with 1-1/4" U bolts clamps, supplied. Requires 50 ohm low-loss coaxial cable and connectors (not included). Base of antenna requires PL259 connector. Suggested mounts: 4187 or 5187
|
This heavy duty 1ať-14 threaded four-way swivel marine mount is perfect for most mounting locations and permits antenna lay-down in desired direction. Designed for deck mounting or can be side mounted with adding a stand-off bracket (sold separately). Bolt holes: 5/16" diameter, 3" x 1a 1 / 2 " on center.
|
This basic 5 foot VHF 3dB gain, 50 watt marine antenna is designed to reduce signal fading in rough seas using brass and copper elements. Features Brass and copper elements, a chrome-plated brass ferrule with standard 1a-14 thread, 15 feet of RG58 coax cable with PL259 connector. Recommended mounts: 4187 or 5187
|
This 5a(tm) VHF 3dB gain 50 watt marine antenna with lift-n-lay mount is constructed of brass and copper elements for superb performance. Antenna kit includes a polycarbonate mount with leveling plate, 12 feet of coax cable, PL259 connector and mounting hardware. Designed for operating in moderate sea conditions.
|
The 5102, Classic 50 watt, 6Db gain 8' tall vertical VHF marine antenna is constructed with larger brass and copper elements, a chrome plated brass ferrule with 1"-14 threads and the white radome antenna is coated with a gloss finish to ensure lasting beauty and provide years of service. Includes 15 feet of side-fed RG58 coax cable & loose PL259 connector. Recommended mounts: 4187 or 5187
|
8a(tm) heavy duty 1-a 1 / 2 ať diameter extension mast constructed with structurally strong fiberglass, chrome-plated brass ferrules, with 1"-14 threads (upper male, lower female) on the ends. The mast is hollow so the coax cable can be routed through the center. Actual physical length is 91ať tall. Recommended mounting kits: 409-R or 410-R
|
The 5223-XT Galaxy series 8a(tm) tall Citizens Band (27MHz) continuous-load end-fed 1/2 wave marine antenna is designed for users requiring high performance communication. Features a stainless steel ferrule with 1ať-14 threads, 20a(tm) RG-8X cable and a loose PL259 connector. This antenna design allows the coax cable to be routed through a 3/8a hole (before installing the PL259 connector) and cut to size for SWR adjustment of the antenna and a clean installation. Maximum power input is 25 watts. Recommended mounts: 4187, 5187 or 409-R, 410-R
|
The 5202 is a 8a(tm) phased 0.625-wave VHF marine antenna. Features brass and copper elements for maximum range and efficiency, a rugged chrome-plated brass ferrule with 1ať-14 threads & 20 feet of side-fed RG-58 coax cable with PL-259 connector. Recommended mounts: 4187 or 410-R
|
The 5237-XT Galaxy Series 8a(tm) Dual Band (800/900 & 1900 MHz) 50 watt 3dB gain Cellular antenna covers digital, analog and PCS cell phone bands. Electrical connections are hand soldered for reliability. A brass choking sleeve eliminates pattern distortion due to cable radiation. Features brass and copper elements for maximum range and efficiency, stainless steel ferrule with 1ať-14 threads, 25a(tm) of RG8-X coax cable & loose TNC connector. Recommended mounts: 4187, 5187
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |