BestPEX Lead Free brass insert PEX fittings meet NSF-Annex G for Lead Free System, ASTM and CSA specifications and are ideal for professional installation or do it yourself plumbing repair. BestPEX PEX Lead Free fittings are compatible with copper PEX crimp rings, stainless steel PEX Clamps and any brand or type of SDR-9 PEX tubing. BestPEX Lead Free brass insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy a" cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8ať from the body of the fitting and crimp the ring/clamp with the PEX crimper. Rings and Clamps are sold separately unless specified in the description.
|
|
BestPEX Lead Free brass insert PEX fittings meet NSF-Annex G for Lead Free System, ASTM and CSA specifications and are ideal for professional installation or do it yourself plumbing repair. BestPEX PEX Lead Free fittings are compatible with copper PEX crimp rings, stainless steel PEX Clamps and any brand or type of SDR-9 PEX tubing. BestPEX Lead Free brass insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy a" cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8ať from the body of the fitting and crimp the ring/clamp with the PEX crimper. Rings and Clamps are sold separately unless specified in the description.
|
|
|
|
Flair-It 06418 Half Inch Nut for Pex FTGS Flair-It Half Inch Nut for Pex FTGS.
|
|
Advanced import stainless steel clamp tool. Crimps 3/8", 1/2", 3/4" & 1" stainless steel clamps. Save time, space and money with this tool! One tool crimps all residential sizes of stainless steel clamps! This tool features hardened Japanese steel jaws for a longer lasting life!
|
|
Elkhart Supply Corporation was founded in 1949 by Lowell and Lucille Shaum. As an electrical wholesaler, the business began to grow in the contractor, industrial and MH/RV market.
|
BestPEX Lead Free brass insert PEX fittings meet NSF-Annex G for Lead Free System, ASTM and CSA specifications and are ideal for professional installation or do it yourself plumbing repair. BestPEX PEX Lead Free fittings are compatible with copper PEX crimp rings, stainless steel PEX Clamps and any brand or type of SDR-9 PEX tubing. BestPEX Lead Free brass insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy a" cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8ať from the body of the fitting and crimp the ring/clamp with the PEX crimper. Rings and Clamps are sold separately unless specified in the description.
|
BestPEX Lead Free brass insert PEX fittings meet NSF-Annex G for Lead Free System, ASTM and CSA specifications and are ideal for professional installation or do it yourself plumbing repair. BestPEX PEX Lead Free fittings are compatible with copper PEX crimp rings, stainless steel PEX Clamps and any brand or type of SDR-9 PEX tubing. BestPEX Lead Free brass insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy a" cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8ať from the body of the fitting and crimp the ring/clamp with the PEX crimper. Rings and Clamps are sold separately unless specified in the description.
|
Homax Spray Spackling is ideal for repairing holes, cracks and gouges in your wall. The easy, spray-on application provides a thinner coat for seamless repair and a smooth finish. This product cannot ship to Hawaii or Alaska. \n\n FROM THE MANUFACTURER \n Homax Spray Spackling is ideal for repairing holes, cracks and gouges in your wall. The easy, spray-on application provides a thinner coat for seamless repair and a smooth finish. This product cannot ship to Hawaii or Alaska.
|
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
5' LENGTH
I.D. x O.D. Ins.=1/2 x 5/8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Elkhart Supply Corporation was founded in 1949 by Lowell and Lucille Shaum. As an electrical wholesaler, the business began to grow in the contractor, industrial and MH/RV market.
|
SAFEPEX TYPE A PEX WATER TUBING
White PEX tubing replaces galvanized, copper -
or CPVC water lines without soldering or glues
Recommended for potable water systems
Barcoded and marked with red or blue ink to -
indicate whether for hot or cold water lines
if using pipe outdoors, it must be buried or -
sleeved to protect from UV light
Super flexible - meets all plumbing codes
16064 3/4 IN. X100 FT. PEX A WHT TUBE
SIZE:3/4" x 100 Ft.
DESC:For Cold Water
|
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
5' LENGTH
I.D. x O.D. Ins.=5/8 x 7/8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Replacement nuts and seals for Flair-it fittings. These nuts and seals are poly bagged 10 per package. Keep extras on hand for when you need them. 10 pack 3/8" nut only
|
|
|
FLAIR-IT Fittings FLARED - CONE & NUT Fittings APPLICATIONS FOR HOT & COLD POTABLE WATER Fittings - For hot and cold potable water fittings (150 degrees at 100 psi). Squarely cut end of tubing, slide nut over tubing. Firmly press tubing onto the flare of the fitting. Slide the nut to the threads and hand tighten securely onto the fitting. Turn 1/4 more turn with a wrench if necessary. Do not use any 2 inch pipe dopes, sealants, Teflon tape or other chemical on Flair-It connections. However, Teflon tape should be used on male pipe threads when connecting to female threads. When connecting to brass, galvanized steel or CPVC, use a male Flair-It fitting instead of a female fitting. When connecting Flair-It fittings to a water heater in a mobile home, we recommend using a 1/2 inch flex copper connector off of the water heater. From a flex connector to polybutylene, use a Flair-It male adapter. Do not use in a closed loop system. Joints should not be made under concrete. Nuts are included. Flair-It Plug Cap 1/2 inch Female Pipe Thread.
|
For hot and cold potable water fittings (150 degrees at 100 psi). Squarely cut end of tubing, slide nut over tubing. Firmly press tubing onto the flare of the fitting. Slide the nut to the threads and hand tighten securely onto the fitting. Turn 1/4 more turn with a wrench if necessary. Do not use any 2 inch pipe dopes, sealants, Teflon tape or other chemical on Flair-It connections. However, Teflon tape should be used on male pipe threads when connecting to female threads. When connecting to brass, galvanized steel or CPVC, use a male Flair-It fitting instead of a female fitting. When connecting Flair-It fittings to a water heater in a mobile home, we recommend using a 1/2 inch flex copper connector off of the water heater. From a flex connector to polybutylene, use a Flair-It male adapter. Do not use in a closed loop system. Joints should not be made under concrete. Nuts are included. Flair-It Coupling Fitting 1/2 inch x 1/2 inch.
|
|
|
|
Ecopoly offers a full line of Polysulfone (PSU) insert PEX fittings. Ecopoly PSU insert PEX fittings meet cNSF-14 Annex G for lead free 61, Mfg To ASTM F2159, ASTM F 877 and CSA 137.5 specifications and are ideal for professional installation or do it yourself plumbing repair. Ecopoly PSU insert PEX fittings are compatible with copper PEX crimp Rings, stainless steel PEX clamps and any brand or Type of SDR-9 PEX tubing. Ecopoly PSU insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy - cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8" From the body of the fitting and crimp the ring/clamp with the PEX crimper.
|
Ecopoly offers a full line of Polysulfone (PSU) insert PEX fittings. Ecopoly PSU insert PEX fittings meet cNSF-14 Annex G for lead free 61, Mfg To ASTM F2159, ASTM F 877 and CSA 137.5 specifications and are ideal for professional installation or do it yourself plumbing repair. Ecopoly PSU insert PEX fittings are compatible with copper PEX crimp Rings, stainless steel PEX clamps and any brand or Type of SDR-9 PEX tubing. Ecopoly PSU insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy - cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8" From the body of the fitting and crimp the ring/clamp with the PEX crimper.
|
|
Ecopoly offers a full line of Polysulfone (PSU) insert PEX fittings. Ecopoly PSU insert PEX fittings meet cNSF-14 Annex G for lead free 61, Mfg To ASTM F2159, ASTM F 877 and CSA 137.5 specifications and are ideal for professional installation or do it yourself plumbing repair. Ecopoly PSU insert PEX fittings are compatible with copper PEX crimp Rings, stainless steel PEX clamps and any brand or Type of SDR-9 PEX tubing. Ecopoly PSU insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy - cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8" From the body of the fitting and crimp the ring/clamp with the PEX crimper.
|
Ecopoly offers a full line of Polysulfone (PSU) insert PEX fittings. Ecopoly PSU insert PEX fittings meet cNSF-14 Annex G for lead free 61, Mfg To ASTM F2159, ASTM F 877 and CSA 137.5 specifications and are ideal for professional installation or do it yourself plumbing repair. Ecopoly PSU insert PEX fittings are compatible with copper PEX crimp Rings, stainless steel PEX clamps and any brand or Type of SDR-9 PEX tubing. Ecopoly PSU insert PEX fittings require the use of a copper ring PEX crimper or stainless steel clamp PEX crimper. Installation is easy - cut the PEX tubing square, slide a copper ring or stainless steel clamp along the tubing, insert the barbed fitting into the end of the tubing, slide the ring over the barb so its about 1/8" From the body of the fitting and crimp the ring/clamp with the PEX crimper.
|
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |