1.0 Gallon Tank (Two 1/4" NPT Ports, 150 psi Rated)
|
P/N 20003 Air Source Kits come with a 275C VIAIR compressor mounted on a 1.5 gallon air tank with a pre-wired 90/120 PSI pressure switch wired! All thata(tm)s left to do is connect the pressure switch to fused power, make a solid ground and connect an air line to the existing compression fitting on the air tank. Air Source Kits provide an all-in-one air source solution.
|
1/2in MALE NPT TO 3/8in
1/2" male NPT to 3/8"
For 1/2" air line
|
|
Replacement check valve for use in air lines, or to replace a failed check valve.
|
Replacement check valve for use in air lines, or to replace a failed check valve.
|
1/4" male NPT to 1/4" compression fitting (for 1/4" air line)
|
They each come with a Pressure Switch with Built-in Relay, an illuminated dash panel gauge with built-in ON/OFF switch, 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for convenient onboard air setup.
|
1/8in Female NPT to 1/4in C
|
100C comes with a 1.5 ft. stainless steel braided leader hose with 1/4ať NPT swivel male fitting hose end and rubber isolated mounting feet as well as insulated electric terminals. VIAIR aCať model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All aCať model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
|
Leader hoses allow hot air from compressors to cool while being delivered to a tire or air tank. Hoses with check valves help to protect the head of the compressor from damaging high pressure starting.
|
18 S.S. Braided Leader Hose (1/8 M to 1/4 F Swivel NPT)All fittings are NPT thread.Use thread sealant for proper installation.Teflon tape is not recommended.Properly sealed recommended torque for 1/8 is 10 ~ 11 ft. lbs. Recommended torque for 1/4 and 3/8 is 16 ~ 18 ft. lbs.
|
Dimensions: 19.00""L x 6.00""W x 7.50""H, Six 1/8"" NPT Ports Dimensions: 19" L x 6" W x 7.5" H Six 1/4"" NPT Ports 150 PSI Rated
|
P/N 20005 Air Source Kits come with a 280C VIAIR compressor mounted on a 2 gallon air tank with a pre-wired 110/145 PSI pressure switch wired! All thata(tm)s left to do is connect the pressure switch to fused power, make a solid ground and connect an air line to the existing compression fitting on the air tank. Air Source Kits provide an all-in-one air source solution.
|
Viair 0 - 100 PSI 2" Tire Gauge with Bleeder Valve is used to measure pressure and operate up to 160 psi, while accurately gauging the pressure in your on-board air set-up. It is easy to read and install, which makes it a necessity for the system. This gauge is backed by one year warranty.
|
VIAIR tire gauges are accurate to within 1% tolerance acoss the measurement.
|
This compact 2-1/2 gallon air tank is rated at 150 PSI, is continuously welded, and internally and externally coated for corrosion resistance. With six 1/4 NPT female ports, the tank can be mounted in many different positions. 24 long x 6 diameter. Silver finish. Hardware included.
Tank is rated at 150 PSI
With six 1/4" NPT female ports
24" long x 6" diameter
|
All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4'' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation.Max Pressure: 200 PSISix 1/4" NPT PortsDimensions: 23.5" L x 6" W x 7.5" HRust Resistant CoatingMounting Hardware Included
|
VIAIR tire gauges are accurate to within 1% tolerance acoss the measurement.
2.5" gauge with hose
0 to 100 PSI
Storage pouch
|
VIAIR tire gauges are accurate to within 1% tolerance acoss the measurement.
|
P/N 20007 200 PSI Air Source Kits come with a 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. The kit not only come with the industrya(tm)s leading 200 PSI compressors but also come with a drain cock, safety valve, 3/8-inch port compression fitting for 1/2-inch air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. Air Source Kits provide an all-in-one air source solution.
|
To compliment their high quaklity compressors Viair has a full line of Stainless stell braided leader hoses to suit your needs. Not only do these hoses look good but the also protect you hoses offoring longer service life.
|
Leader hoses allow hot air from compressors to cool while being delivered to a tire or air tank. Hoses with check valves help to protect the head of the compressor from damaging high pressure starting. Length: 24"
3/8" Male NPT to 3/8" Male NPT Swivel
Check valve
|
275C features include a standard 1/4ať stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. VIAIR aCať model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All aCať model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal
|
280C CE Version is rated to 150 PSI maximum working pressure. Features include a standard 1/4ať stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. VIAIR aCať model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All aCať model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
|
VIAIR tire gauges are accurate to within 1% tolerance acoss the measurement.Get rapid hands-free air down adjustment with easy fine tuning with this gauge from Viair 0 to 60 PSI Storage Pouch Rapid, hands free
|
Replacement direct-mount air filter assembly with 3/8" NPT thread (metal housing)
Metal Housing
3/8" NPT
|
BRAIDED BLACK COIL HOSE
|
Get the freedom you've been looking for with this 30 ft. extension hose from Viair. You'll no longer be limited to the range of your factory compressor hose once you replace it with this.
Max PSI: 200
Close ended
Quick Connect Coupler w/ Heat Shield
|
For tires up to 33 inchesPowerful portable compressor150 PSI / 2.30 CFMComes with vibration resistant aluminum sand tray, 3 inflation tips, 5 in 1 inflator/deflator air hose, inline 100 PSI gauge, deluxe carry bag, 40 amp inline fuse holder, and dual battery clampsConnects to your vehicle battery, then connects to valve stem, and turns onMonitor tire pressure with 100 PSI inline gauge12 VPermanent magnet motorMaximum 12V amp draw: 30 ampsMaximum 24V amp draw: 15 ampsDuty cycle: 33 percent @ 100 PSIIngress protection rating: IP54Power cord length: 8 feetAir hose length: 25 feetDimensions (L x W x H): 9 x 4.9 x 7.5 inchesWeight: 8.7 poundsManufacturer warranty: 60-day warranty
|
VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter!
|
325C 24V are compressors that work with low amp draw. Features include a standard 1/4ať stainless steel braided leader hose with check valve and insulated wiring for simple installation.VIAIR aCať model compressors are intended to fill air tanks. They are not equipped with an ON/OFF switch or pressure sensitive shutoff device of any kind. The use of a pressure switch and relay are recommended and required. All aCať model VIAIR compressors are equipped with a stainless steel braided leader hose and a check valve to keep the compressor from restarting under pressure which can create an amp draw spike and can cause motor damage. Most VIAIR compressors are equipped with a thermal overload protector that will shut down the unit when overheated. When cool, the compressor will automatically restart as normal.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |