This corner guard is constructed of 18 gauge type 304 stainless steel and is available in bright or satin finish. Drilled holes for attachment with screws is optional.
Delivery time up to three weeks. |
CORNER GUARD
For heavy traffic areas
High impact clear plastic
Will not yellow
Quick and easy to install - Nail-on
Great for playrooms, kitchens and hallways
5/8" width
01434 4 FT. NAIL ON CORNER GUARD
SIZE:4 Ft.
|
Drywall corner trim, finishes short run off-angles of any length with a narrower flange, straight precise lines, built-in flexible hinge adjusts to fit, any inside or outside corner angle. Flange width hides irregular framing. 3.25" wide x 100' roll.
Boxed
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
GRIPSTICK BULLNOSE CORNER CAP
Designed to easily finish two intersecting -
90 degree outside bullnose corners
Made of rigid vinyl - will not rust
Eliminates need of mitering & corner filling
Alignment tabs make it easy to match with -
Phillips metal, vinyl or paper face metal -
2-WAY BULLNOSE CORNER CAP
SIZE:3/4"
DESC:2-Way
|
GRIPSTICK BULLNOSE CORNER CAP
Designed to easily finish two intersecting -
90 degree outside bullnose corners
Made of rigid vinyl - will not rust
Eliminates need of mitering & corner filling
Alignment tabs make it easy to match with -
Phillips metal, vinyl or paper face metal -
3-WAY BULLNOSE CORNER CAP
SIZE:3/4"
DESC:3-Way
|
1-A Expansion flange corner bead
|
PROVA CORNERS
Designed to install around corners in showers
Constructed from Prova Mat Membrane which -
provides a waterproof application
Preform design eliminates any seams
Corners are to be installed prior to tile
For commercial and residential use
2 corners per bag
80222 OUTSIDE CORNER
STYLE:Outside Corner
|
PROVA CORNERS
Designed to install around corners in showers
Constructed from Prova Mat Membrane which -
provides a waterproof application
Preform design eliminates any seams
Corners are to be installed prior to tile
For commercial and residential use
2 corners per bag
80223 INSIDE CORNER
STYLE:Inside Corner
|
Use to finish off corners. Combines the flexibility of tape with the strength of steel reinforcement.
Wdth In x Lgth Ft=2 x 100
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
This corner guard is constructed of 18 gauge type 304 stainless steel and is available in bright or satin finish. Drilled holes for attachment with screws is optional.
Delivery time up to three weeks. |
Transforms 3/4" radius bullnose corners into 90-degree corners for quick, easy baseboard or crown molding installation. Fastens in place with nails or staples, smooth to wall with joint compound. Saves time and effort. Use with metal, plastic, or paper be
ad.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Boxed
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Pre-cut standard lengths withstand severe impacts, settling and seismic movements without cracking, denting, chipping or peeling.
Lgth Ft=8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Pre-cut standard lengths withstand severe impacts, settling and seismic movements without cracking, denting, chipping or peeling.
Lgth Ft=8
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Residential and commercial corner guards | Durable plastic guards protect against torn wallpaper, corner wear, smudged walls and chipped plaster | Clear | Apply with fasteners provided
|
Offers round corners. Includes a water activated adhesive and punch holes that allow joint compound to further bond the corner to the drywall. Does not blister, bubble, dent or crack.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Offers round corners. Includes a water activated adhesive and punch holes that allow joint compound to further bond the corner to the drywall. Does not blister, bubble, dent or crack.
Size In x Ft=3/4 x 10
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece and 1 set of drive nails. .045 wall thickness.
Size In=48 x 3/4 x 3/4Color=Clear
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Residential and commercial corner guards | Durable plastic guards protect against torn wallpaper, corner wear, smudged walls and chipped plaster | Clear | Apply with fasteners provided
|
Residential and commercial corner guards | Durable plastic guards protect against torn wallpaper, corner wear, smudged walls and chipped plaster | White | Apply with adhesive
|
This vinyl outside corners base's high-grade surface resists wear and tear. Its dry back adheres more strongly to any wall.
|
- 1 1/4ö White Outside Corner Cover 10 Pack
- Color: White10 Pack - Used for right angle turns around external corners - Maintains cable bend radius - Designed for raceway applications - Accommodates ICC 1 +öW x +öH raceway sections - Simple to install - UL Listed |
|
Provides a solution to finish corners at three-way 90-degree 3/4" bullnose intersections. Features extended tabs for easier alignment and a professional finish. Works well with both metal and vinyl bullnose corner beads. Eliminates the need for special co
rner bead applications and mitering.
Size In=3/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Extruded vinyl shield used for protecting or repairing wall corners from chipped paint, torn wallpaper or fingerprints. Includes 1 piece with an adhesive back. .045 wall thickness.
Size In=48 x 3/4 x 3/4Color=Clear
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Size In=48 x 1-1/8 x 1-1/8Color=Clear
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Size In=3/4
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |