|
Rear transfer case flange adapter. Must be used with the following drive shaft part numbers: #RE1887-240 (2-door) and RE1887-430 (4-door).
|
Most transmission and converter failures can be traced directly to excessive heat. B&M temperature Gauge comes with a light kit, color coded dial face, all wires and terminals, a special sending unit and T-fitting for easy installation.
|
G2 Axle and Gear offers multiple high quality Pinion Flanges and yokes for various applications with increased strength and reliability. Many of the G/2 yokes are equipped to uses the stronger and popular U-Bolt style mounting that is preferred by racers and off roaders alike.
|
|
|
ARB's Air Locker engineers have expanded the range of differential covers and are pleased to release new versions of their competition differential cover to suit the Jeep Wrangler JL Sport, Sahara and Rubicon models. These new differential covers are a great addition to the already extensive range which exists for the Jeep Dana differentials.
ARB's Differential Cover will protect your differential against the hazards of competition or extreme off-road use. When off-road, it is inevitable that obstacles encountered could potentially inflict expensive damage on your differential. To prevent this, ARB's Differential Cover has been specifically engineered to protect the differential and ring and pinion set and your ARB Air Locker from any off-road hazards.
|
Browse our exclusive collection of auto accessories that includes top quality products to enhance the style, comfort and functionality of your vehicle. We provide one stop shop for the perfect auto accessories for the vehicle.
|
This item is designed to fit specific vehicles. Please ensure correct part fitment before purchasing this project. Contact the seller directly for additional product information and availability.3 5 BOOT HANGER.
|
|
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
|
FEATURES
-6 x KC C-Series RGB LED Rock Light Pods -Powder Coated Die-Cast Aluminum Housing with Shatter Resistant Polycarbonate Lens -Customized RGB Color, Light Modes and Functions via KC's Mobile Bluetooth App Available for Android or iOS -Easy Plug-N-Play Install and Wire Management -Application: Rock Crawling, Puddle Lights, Work Light for Wheel Wells and More! SPECIFICATIONS -Wattage: 9W -LED Source: Cree XBD RGB -Amp Draw: 1.0A -Voltage: 9-36V -IP Rating: IP68 -Dimensions: H - 1.375" x D - .457" x W - 2.76" PARTS INCLUDED -(6) LED Rock Light Pods -(6) Rubber Mounting Pad w/ Hardware -(1) Waterproof Power Wiring Harness and Bluetooth Control Module Box WIRELESSLY CONTROL LIGHT COLOR AND FUNCTION VIA KC'S BLUETOOTH MOBILE APP KC's RGB LED rock light kit puts you in full control offering endless color options and customization to meet your lighting preferences while improving night time visibility under and around your vehicle. Over 15 different advanced light modes and effects available at your fingertips: -Choose from over 16 million RGB color options via the KC mobile app's color wheel selector or specific colors from your favorite photos -LED Speeds and Sequences: Disco, Flashing, Strobe, Fade, Mono/Multi Color Jump -Music and Voice Sync Mode: Light follows the rhythm of your favorite music or voice inputs from your phone's microphone -Brightness Control: User defined LED light intensity control SIMPLE WIRING AND INTEGRATION KC RGB LEDs feature waterproof plug-n-play connectors that are easily wired to one central control box module. Simply connect the control box to a power source and run all the wiring to one central location on your vehicle for a seamless install. |
The nature of this superior material, Energy Suspension's Hyper-Flex, is the result of twenty plus years of experience working with and formulating polyurethane materials. Careful selection of material firmness or durometer is used for each specific application on the vehicle's suspension and frame. The three most valuable reasons for using Energy Suspension's Hyper-Flex components are performance, durability and appearance. Called "HYPERformance", Energy Suspension's Hyper-Flex is performance polyurethane that delivers an amazing amount of performance to any vehicle that runs with it. Proven on the race track as well as the street, on and off-road, under the most demanding conditions. Over twenty years of positive customer raves have attested to that. Whether domestic or import, front, rear or 4WD, or old or new, all vehicles will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane suspension components. Durable Hyper-Flex components do not rot or deteriorate from exposure to oils and undercar chemicals or atmospheric conditions like smog and ozone. Unlike O.E.M. rubber, Hyper-Flex components will not break down and deteriorate causing mushy handling and poor steering response. Certainly not what you want on your vehicle. And for improved appearance, Hyper-Flex components are available in red or black, to suit your needs for show or go.
|
When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission's kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.
|
The all new G2 Heavy Duty JK Rear Dana 44 axle truss and armor system gives your JK the strength it needs to take serious abuse. Constructed from 1/4" thick main components and 1/8" thick reinforcement plates, this truss design provides critical strengthening in a lightweight package across the whole axle, not just the long tube. All components are laser cut to precise specifications to ensure a perfect fit for easy installation. Welding is required, including to the cast center section. Professional welding skills are strongly recommended. The G2 heavy duty JK Rubicon Rear Dana 44 axle truss is intended for use on JKs with at least some lift. For vehicles with minimal or no lift, please check clearances before installation. This system is designed for US-Spec vehicles. Fits 2007 to 2016 JK Rubicon Dana 44 rear axle;2 and 4-door models;Heavy-duty steel construction;Unpainted;Welding required;Upper link mount sold separately part # G/268-2052-2
|
G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
For Use On Ford 8.8in. Rear Axles
Cast From Lightweight Aluminum To Dissipate Heat
Raw Aluminum Finish
ReinForcing Ribs For Added Rigidity And Strength
Heat Treated And Shot Peened To Help Handle A Direct Impact
Fully Machined Seal Surface For A Leak Free Installation
|
G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
|
G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, These covers help protect your investment while adding a distinct look to your vehicle. DANA 30 Dana 30 front axle;Cast from lightweight aluminum;Black powder coat finish;Ball milled reinforcing ribs;Heat treated and shot peened helps handle direct impact;Fully machined seal surface for a leak free installation;Convenient filler plug for easy service;Fill level plug for accurate fill level for both high and low pinion axles
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Outer Axle Shaft
Dana 30/44
27 Spline
6.15"" Overall Length
Accepts 5-760X U-Joint
Driver and Passenger Side
Machined to Accept Full Circle Clips
For use in Jeep XJ/YJ/TJ w/5-760X U-Joint
|
A new clutch kit is sometimes called a a3-piece clutch kitať because it containsa-drum roll pleasea-three pieces. For example, a Centerforce clutch kit contains a pressure plate, friction plate (aka a clutch disc), and a Centerforce throwout bearing. The duties of the first two may seem obvious, but what about the Centerforce throwout bearing? A Centerforce throwout bearing is what actually allows your clutch pressure plate to freewheel while the clutch is pressed in (released). The Centerforce throwout bearing also has to handle the pressure of the clutch springs while it's spinning and absorbing all that engine rpm. Think about that for a few minutes, and you'll develop the healthy respect for the Centerforce throwout bearing that we've developed. If your clutch makes a rumbling noise when you have your foot on the clutch pedal, but it goes away when the clutch is engaged, your throwout bearing is suspect. If you have a stock clutch and throwout bearing, replace the whole unit with a Centerforce clutch and Centerforce throwout bearing. You'll get the long life and killer clamping force of a Centerforce clutch, and a brand-new, whisper-quiet Centerforce throwout bearing to go along with it.
|
|
|
Yukon axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.
|
Unimatic 5-ft Blue Jacket cable Pre-lubed for smooth operation Proper clearance to reduce backlash .25 in. outer diameter blue long lay outer jacket Two lengths available, 5 foot cable is standard for most applications. (Unimatic shifters only).
|
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
|
Yukon Axle Bearing and Seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250" OD, 1.400" ID. This Axle Bearing and Seal kit services one side only.
|
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
|
|
|
|
|
|
Copyright © 1999-2023 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |