Our fully adjustable, Adjust-A-Gate+ system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate+ system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate+ systems will adjust to fit openings of up to 5' Wide (single gate) or up to 10' wide (double gate), accessories include a drop rod for double drive applications.
|
Our fully adjustable, Adjust-A-Gate+ system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate+ system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate+ systems will adjust to fit openings of up to 5' Wide (single gate) or up to 10' wide (double gate), accessories include a drop rod for double drive applications.
|
Our fully adjustable, Adjust-A-Gate+ system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate+ system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate+ systems will adjust to fit openings of up to 5' Wide (single gate) or up to 10' wide (double gate), accessories include a drop rod for double drive applications.
|
The Adjust-A-Gate™ Drop Rod kit is perfect for keeping that double drive gate in place. Constructed of heavy duty solid steel +with a galvanized finish and a guide bracket with self-tapping screws for easy installation. Attaches to one half of a double gate assembly for securing your gates closed or in the open position, also used on single gates to secure your gate opened when needed. Drop rod assembly for Adjust-A-Gate I
|
Our fully adjustable, Adjust-A-Gate+ system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate+ system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate+ systems will adjust to fit openings of up to 8' Wide (single gate) or up to 16' wide (double gate), accessories include a drop rod for double drive applications. 2 Rail Adjust-A-Gate Kit Original series, for openings of 36"-60" wide, 34" high frame for 3' high fences
|
Our fully adjustable, Adjust-A-Gate+ system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate+ system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate+ systems will adjust to fit openings of up to 5' Wide (single gate) or up to 10' wide (double gate), accessories include a drop rod for double drive applications.
|
Our fully adjustable, Adjust-A-Gate™ system is ideal for repairing an old gate or building a new gate. Equipped with all necessary hardware parts, our gate is assembled onsite to get the job done right the first time. The Adjust-A-Gate™ system comes with all the components needed to build a sturdy, reliable gate that will serve you for years to come. The Adjust-A-Gate™ systems will adjust to fit openings of up to 5' Wide (single gate) or up to 10' wide (double gate), accessories include a drop rod for double drive applications.
|
V851 GATE ANTI-SAG KIT
Designed to prevent or correct sagging gates -
with up to 7-1/2 ft. diagonal bracing
Kit includes brackets, rope clips, cable -
and turnbuckle
Made of cold-rolled steel - zinc plated
V851 ANTI-SAG GATE KIT
|
Provides a stable mounting surface when attaching the opener to your gate. Two brackets required for dual applications.
|
V21A ADJUST-O-MATIC GATE LATCH
Floating bar adjusts to compensate for gate sag
For outswinging gates, doors & animal pens
Strike can be mounted either on gate or post
Latches automatically - can be padlocked
Designed for right or left hand applications
Hole punched in release lever for rigging-
cord release from opposite side
Visual pack with screws
V21A 4 IN. BLACK ADJ GATE LATCH
BAR SIZE:4"
FINISH:Black
|
Fits round tube gates 1-5/8" to 2" O.D. Opens easily with one hand. Gate can swing either direction when latch is released. Helps prevent gate end swinging and sagging.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
V13B ALL-PURPOSE DOOR / GATE LATCH
Designed for use with right- or left-hand -
swinging or sliding doors and gates
Extra-strong latch is for stall doors, barn -
doors and livestock enclosures
Cam action eliminates door rattle
Can be padlocked for additional security
Visual pack with screws
V13B ZINC DOOR/GATE LATCH
FINISH:Zinc Plated
|
V2120 SAFETY GATE HOOK
Steel wire hook & hot-rolled steel -
plate staple - zinc plated finish
For gates, doors, & other applications -
where positive latching is desired
Visual pack with screws
V2120 6 IN. ZN SAFETY GATE HOOK
SIZE:6"
|
V23A ADJUST-O-MATIC GATE LATCH
Designed for flush stockade-type gates with -
spacing between post and gate
Also suitable for fences, horse barns, cattle -
gates and other heavy-duty uses
Two pivot holes are provided for either -
right- or left-hand mounting
Latches automatically - can be padlocked
Visual packed with screws
V23A SBLK HVY DUTY GATE LATCH
FINISH:Black
|
2110 SAFETY GATE HOOK
Designed for animal enclosures, secures heavy -
wood gates and doors
Steel wire & hot-rolled steel plate staples
Zinc plated
Safety lock closes automatically to help -
prevent accidental opening by livestock
Includes 2-1/4" x 1-7/8" X-heavy plate staples
Boxed loose - barcoded
2110BC 8 IN. ZN SAFETY GATE HOOK
SIZE:8"
|
Two-way lockable gate latch. Fits round tube gates 1-1/4" to 1-1/2" O.D. Opens easily with one hand. Gate can swing either direction when latch is released. Helps prevent gate end swinging and sagging. Designed to accept padlock. (U-Bolts Not Included).
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
V27 ORNAMENTAL GATE LATCH
For in-swinging & out-swinging doors
For doors up to 3" in thickness
Visual pack
V27 BLACK THUMB LATCH
FINISH:Black
|
TruClose Heavy Duty self-closing, tension adjustable hinges | TCHD1AS3BT adjustable spring gate hinge for high traffic or large metal gates | Meets pool safety codes | Gate sizes up to 6' H x 4' W | Max self-closing gate Wgt. 154 lbs. | Quick & easy to install with alignment ridge |Easy tension adjustment | Stainless steel spring adjustable from either end of hinge | Decorative black trim covers will hide fasteners | Super-strong engineering polymer and stainless steel components | Self-lubricating and UV resistant | Will not rust, corrode, stain or sag | Fits gate to post gaps of 1/4" - 1" | Gate swings 180 degrees | Contains 2 hinges and stainless steel fasteners | Limited Lifetime Warranty
|
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
V1135 SLIDING BOLT DOOR / GATE LATCH
Designed for right- or left-hand swinging -
or sliding doors and gates
Rounded edges protect livestock
Can be locked using National 33S plate staple -
and a padlock
Visual pack with screws
V1135 ZN DOOR & GATE LATCH
FINISH:Zinc Plated
|
V22 AUTOMATIC GATE LATCH
Designed with angled bar for out-swinging gates
Strike can be mounted on post or gate
Latches automatically - can be padlocked
For right- or left-hand applications
Hole punched in release lever is for rigging -
cord release from opposite side
Made of hot-rolled steel with steel rod bar
Visual pack with screws
V22 ZN GATE LATCH
FINISH:Zinc Plated
|
TruClose Regular self-closing, tension adjustable hinges | TCA1S3BT adjustable spring gate hinge for light to medium weight metal gates | Meets pool safety codes | Gate sizes up to 5' H x 3' W | Max self-closing gate Wgt. 66 lbs. | Quick & easy to install with alignment ridge | Easy tension adjustment | Stainless steel spring adjustable from either end of hinge | Decorative black trim covers will hide fasteners | Super-strong engineering polymer and stainless steel components | Self-lubricating and UV resistant | Will not rust, corrode, stain or sag | Fits gate to post gaps of 1/4" - 7/8" | Gate swings 180 degrees | Contains 2 hinges and stainless steel fasteners | Limited Lifetime Warranty
|
V2104 HEAVY GATE HOOK & STAPLES
Steel wire and hot-rolled steel plate staples
Zinc plated
Designed for securing gates and doors on farm -
and utility buildings
Includes 1-5/8" x 1-1/4" extra heavy -
plate staples
Visual pack with screws
V2104 5 IN. ZN GATE HOOK
SIZE:5"
|
V2106 HEAVY GATE HOOK & SCREW EYES
Designed for securing gates and doors and -
other applications
Heavy gauge steel - zinc plated
Furnished with size 2 screw eyes
Visual pack with screws
V2106 6 IN. ZN GATE HOOK
SIZE:6"
|
LokkLatch General Purpose key lockable gate latch | Quick and easy to install with side mounting legs | Key lockable convenience | Adjusts horizontally and vertically to compensate for gate sag | LokkLatch fits metal, wood and vinyl gates | UV resistant | Super-strong engineering polymer and stainless steel components | Will not rust, stain or corrode | Contains different mounting brackets to fit gate to post gaps of 3/8" to 1-3/8" | Keyed alike | Limited Lifetime Warranty
|
8413 SPEAR GATE KIT WITH PULL
Decorative Spear design gate kit
Ideal for gates, sheds and garages
Instantly adds curb appeal to your home
Kit includes 4 dummy hinges and 2 pulls
strap length 16" and pull length 10"
Visual pack
V8413 BL SPEAR GATE KIT
FINISH:Black
|
POST HINGE
Use 2 for single walk gate
Use 4 for double drive gate
Male hinge
328530C 2-3/8 IN. GATE POST HINGE
SIZE:2-3/8x5/8"
|
20-2 DOUBLE DOOR GUIDES
Designed for large, by-passing doors
Floor mounted guide keeps doors from -
bumping into each other
Adjustable to maximum of 3" thick doors
Zinc Plated
20-2 ZN DBL DOOR GUIDE
FINISH:Zinc Plated
|
V2102 HEAVY GATE HOOK & STAPLE
Designed for securing gates and doors on -
farm and utility buildings
2 sharp point staples for quick installation
Steel wire material with zinc plated finish
Visual pack
V2102 5 IN. ZN GATE HOOK
SIZE:5"
|
WALK GATE HARDWARE SET
For attaching a walk gate to a terminal post
Includes (2) post hinges, (2) frame hinges, -
fork, collar plus nuts and bolts
328536C 2-3/8 WLK GATE HDW SET
SIZE:2-3/8"
|
Allows gate to open and close with ease. Fits round tube gates 1-5/8" to 2" O.D. Prevents gate sagging.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Magnetic safety gate latch for pools and child safety areas. The MagnaLatch Series 3 Vertical Pull now with Visual Indicator provides locked & unlocked status |6-pin re-keyable security lock |Keyed alike | Vertical & horizontal alignment indicators |Superior performance in extreme climates |Industry's greatest gate/post movement tolerance |Innovative vertical & horizontal adjustment | Lift knob is more ergonomic and child resistant |Industry leading magnetic latching technology |Fits standard gate to post gaps of 1/2" to 1-1/2" (13 - 38mm) |MagnaLatch Vertical Pull allows latch release to be mounted at required pool code height on gates 60" or higher |With proper installation will meets pool safety codes |For metal, wood or vinyl gates |Gate gap spacer allows for larger gaps 1-1/2" to 2" |Limited Lifetime Warranty
|
|
|
|
|
Copyright © 1999-2021 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |