PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High wet grab0 or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
|
PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High wet grab0 or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
|
PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High wet grab0 or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
|
PC-7 is the tough job epoxy!a This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.a High wet grab0 or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
|
PC-7 is the tough job epoxy!a This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.a High wet grab0 or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
|
PC-7 is the tough job epoxy!a This paste epoxy was formulated for maximum bonding power. When mixed, components A (grey) and B (black) reacts to form a bond of tremendous strength. PC-7 formulation provides extended working time, for large and critical jobs, which allow the user to reposition work or make changes.a High wet grab0 or tack of PC-7 Paste Epoxy makes overhead and sidewall work easy without drip or sag. PC-7 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
|
PC Concrete0 epoxy gel is an anchoring and concrete repair product. PC Concrete0 is formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block, and unreinforced masonry. PC Concrete0 has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134-F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete0 is excellent for filling and repair cracks in concrete. PC Concrete0 out performs all caulks and hydraulic cement. PC Concrete0 will not come loose from any cleaned concrete surface. PC Concrete0 will hold during expansion and contraction of concrete. PC Concrete0 the best solution for permanent concrete repair. PC Concrete0 is a two component (1:1 ratio), 100% solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete0 has a long working time (20 minutes at 75-F.), while providing a bolt down/paint time in as little as 4 hours.
|
PC-Fahrenheit0 is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Fahrenheit0 is formulated for increased temperatures. PC-Fahrenheit0 can be expected to outperform other putties at high temperatures. Temperatures extremes of 350-F (176-C) to 500-F (260-C) will reduce service life of the repair. High Temperatures contact may produce an objectionable odor. aCut, mix and apply. PC-Fahrenheit0 allows a working time of about 8 minutes and cures for service in 60 minutes.a
|
PC-Fast-N EZ0 is an extremely flexible translucent paste epoxy. Ease of use is the key with this self mixing formulation. PC-Fast-N EZ0 flows beautifully through a static mix nozzle that mixes the epoxy thoroughly. The mixing nozzle doesnaet just mix the product; it also helps with precise applications. PC-Fast-N EZ0 has a fast cure time, making jobs complete and easy as 1-2-3!
|
PC-Marine0 is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine0 is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. aCut, mix and apply. PC-Marine0 allows a working time of about 15 minutes and cures for service in 60 minutes.
|
PC-Metal0 is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Metal0 is formulated with metal fibers to add strength and resilience but remains non conductive. aCut, mix and apply. PC-Metal0 allows a working time of about 3 minutes and cures for service in 60 minutes.
|
PC-Petrifier is a single component adhesive, formulated to fully penetrate and revitalize rotted wood.a Modern technology has allowed us to develop a water base wood consolidant that is environmentally friendly.a PC-Petrifier's low viscosity allows deep penetration into soft rotted wood fiber, restoring old wood to near structural integrity. aSeal and restore rotted soft wood fibers in window sills, sashes, frames, trim, decorative beams and columns, etc. PC-Petrifier can also be used to prepare old wood for priming and painting. Apply to exposed wood grain to protect from damage.a Not for structural repairs. If you have structural wood damage, please see our PC-Rot Terminator. aaDo not use in conjunction with PC-Wood Guardian0 or other Borate products.
|
PC-Petrifier is a single component adhesive, formulated to fully penetrate and revitalize rotted wood.a Modern technology has allowed us to develop a water base wood consolidant that is environmentally friendly.a PC-Petrifier's low viscosity allows deep penetration into soft rotted wood fiber, restoring old wood to near structural integrity. aSeal and restore rotted soft wood fibers in window sills, sashes, frames, trim, decorative beams and columns, etc. PC-Petrifier can also be used to prepare old wood for priming and painting. Apply to exposed wood grain to protect from damage.a Not for structural repairs. If you have structural wood damage, please see our PC-Rot Terminator. aaDo not use in conjunction with PC-Wood Guardian0 or other Borate products.
|
PC-Petrifier is a single component adhesive, formulated to fully penetrate and revitalize rotted wood.a Modern technology has allowed us to develop a water base wood consolidant that is environmentally friendly.a PC-Petrifier's low viscosity allows deep penetration into soft rotted wood fiber, restoring old wood to near structural integrity. aSeal and restore rotted soft wood fibers in window sills, sashes, frames, trim, decorative beams and columns, etc. PC-Petrifier can also be used to prepare old wood for priming and painting. Apply to exposed wood grain to protect from damage.a Not for structural repairs. If you have structural wood damage, please see our PC-Rot Terminator. aaDo not use in conjunction with PC-Wood Guardian0 or other Borate products.
|
PC-Plumbing0 is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Plumbing0 is NSF rated safe for contact with potable water. PC-Plumbing0 can be applied to wet and dry surfaces. aCut, mix and apply. aPC-Plumbing0 allows a working time of about 3 minutes and cures for service in 60 minutes.a
|
PC-Rot Terminator is structural wood hardener designed to strengthen decayed or rotted wood. The mixture is a low viscosity liquid that penetrates porous surfaces filling and sealing voids with an epoxy that cures to a hard but durable component. PC-Rot Terminator is useful for replacement of missing wood fibers or wood resin. PC-Rot Terminator fills the voids in the wood with an elastomer that has strength greater than wood. PC-Rot Terminator acts as a binder that glues the wood fibers together. The wood fibers become much stronger in combination with the epoxy elastomer.
|
PC-Rot Terminator is structural wood hardener designed to strengthen decayed or rotted wood. The mixture is a low viscosity liquid that penetrates porous surfaces filling and sealing voids with an epoxy that cures to a hard but durable component. PC-Rot Terminator is useful for replacement of missing wood fibers or wood resin. PC-Rot Terminator fills the voids in the wood with an elastomer that has strength greater than wood. PC-Rot Terminator acts as a binder that glues the wood fibers together. The wood fibers become much stronger in combination with the epoxy elastomer.
|
Avoid costly replacement with PC Rotted Wood Repair Kit, included: PC-Petrifier an environmentally friendly, water based polymer designed to harden rotted and damaged wood. PC-Woody is a (peanut butter like consistency) paste epoxy which is made from real wood. PC-Woody is used for permanent repairs to wood. Rebuild, shape and mold missing wood. PC-Lumber0 is a hand moldable putty epoxy that cures in 60 minutes. PC-Lumber0. For use on all non-structural rotted wood.
|
PC-SuperEpoxy is a translucent paste epoxy that provides quick working time and quick cure time. Incredible strength and flexibility allows the user to make challenging repairs permanently. The product mixes through the nozzles with the aid of a mixing gun. Great for repeated use and where pinpoint accuracy is desired. The non-drip formulation allows the user to set multiple applications without worrying about drip clean-up. Refills available on this site.
|
PC-Super Epoxy is a non drip translucent paste epoxy with unlimited uses in bonding, sealing, and as a filler for most materials. From Home owners, Do-It-yourselfers, and professionals such as stair installers PC-Super Epoxy is the perfect all around adhesive! a This paste epoxy was formulated to be extremely versatile, flexible, and resilient with enormous strength. Unlike our other paste epoxies PC-Super Epoxy is designed to be fast curing. PC-Super Epoxy has a viscosity similar to Vaseline making overhead and sidewall work easy without drip or sag. Stair installers just love this product for installing iron balusters. PC-Super Epoxy demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.
|
|
Manual dispensing gun for 50-ml PC Products epoxy cartridges.Can also be used with any sealant or adhesive that has coordinating cartridge size.Made from steel for strength and durability.Thumb-release trigger allows controlled application.Ladder hook for hanging when not in use.
|
PC-SuperEpoxy is also available in an injectable system. The 300ml Cartridge is ideal for repetitive applications requiring quick and precise dispensing. No mixing or measuring required. This larger size is ideal great for contractors.
|
PC-SuperEpoxy is a translucent paste epoxy that provides quick working time and quick cure time. Incredible strength and flexibility allows the user to make challenging repairs permanently. The product mixes through the nozzles with the aid of a mixing gun. Great for repeated use and where pinpoint accuracy is desired. The non-drip formulation allows the user to set multiple applications without worrying about drip clean-up. Use as a refill for the kit available on this site.
|
PC-Woody is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High wet grab0 or tack of PC-Woody makes overhead and sidewall work easy without drip or sag. PC- Woody demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood.
|
PC-Woody is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High wet grab0 or tack of PC-Woody makes overhead and sidewall work easy without drip or sag. PC- Woody demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood.
|
PC-Woody is an epoxy paste formulated to replace missing and rotted wood. It has structural strength greater than most wood. PC- Woody is a permanent wood repair for interior and exterior applications. This epoxy is made from real wood and has many characteristics of wood. PC-Woody formulation provides extended working time, for large and critical jobs, which allows the user time to reposition work or make changes. High wet grab0 or tack of PC-Woody makes overhead and sidewall work easy without drip or sag. PC- Woody demonstrates excellent resistance to all weather elements, mildew dry rot, UV light, fresh and salt water, and also chemicals present in pressure-treated wood.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |