a This is a non-isolated step up converter.
Step up from 12VDC to 24VDC at 10 Amps DC
Switch Mode design
CE approved
High Efficiency
Over-current protection
Over-voltage, Reverse Polarity protection
6.3 mm push-on flat pin connectors
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
DC-360 series is a complete line of high efficiency 360 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-360A-12 isolated DC-DC converter provides a highly regulated output DC voltage of 12.5 Volts for an input DC voltage range of 9-18 Volts and rated output current of 30 Amps. Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with a 1 / 4 a push-on flat blade aquick disconnecta connectors.DC-360 series is a complete line of high efficiency 360 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-360A-12 isolated DC-DC converter provides a highly regulated output DC voltage of 12.5 Volts for an input DC voltage range of 9-18 Volts and rated output current of 30 Amps. Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with a 1 / 4 a push-on flat blade aquick disconnecta connectors.IDC-360 series is a complete line of high efficiency 360 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-360A-12 isolated DC-DC converter provides a highly regulated output DC voltage of 12.5 Volts for an input DC voltage range of 9-18 Volts and rated output current of 30 Amps. Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with a 1 / 4 a push-on flat blade aquick disconnecta connectors. IDC-360A-12 isolated DC-DC converter is EMI/EMC compliant and conforms to European standards EN50081-1 (for EMI), EN50082-1 (for EMC) and the European Automotive Directive 95/54/EC.IDC-360 series is a complete line of high efficiency 360 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-360A-12 isolated DC-DC converter provides a highly regulated output DC voltage of 12.5 Volts for an input DC voltage range of 9-18 Volts and rated output current of 30 Amps. Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, overvoltage and reverse polarity connection. The unit comes with a 1 / 4 a push-on flat blade aquick disconnecta connectors. IDC-360A-12 isolated DC-DC converter is EMI/EMC compliant and conforms to European standards EN50081-1 (for EMI), EN50082-1 (for EMC) and the European Automotive Directive 95/54/EC.The IDC-360 series is a complete line of high efficiency 360 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-360A-12 isolated DC-DC converter provides a highly regulated output DC voltage of 12.5 Volts for an input DC voltage range of 9-18 Volts and rated output current of 30 Amps. Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, over voltage and reverse polarity connection. The unit comes with a 1 / 4 a push-on flat blade aquick disconnecta connectors.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
The DC-360 series is a complete line of high efficiency 360 Watt isolated DC-DC converters suitable for applications requiring galvanic isolation between the input and the output. IDC-360A-24 isolated DC-DC converter provides a highly regulated output DC voltage of 24.5 Volts for an input DC voltage range of 9-18 Volts and rated output current of 15 Amps. Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, over voltage and reverse polarity connection. The unit comes with a 1 / 4 a push-on flat blade aquick disconnecta connectors.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
SAMLEX - DC TO AC 1,500 WATTS (3,000 WATTS PEAK) POWER INVERTER WITH 2 AC OUTLETS LOW BATTERY ALARM & SHUTDOWN & WIRING TERMINALS
|
This high efficiency switch-mode step-down DC-DC converter converts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC) to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 60 Amps. The SDC-60 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include overload, over-heating, reverse polarity and over-voltage protection.
***THIS IS A MAPPED PRODUCT***
|
This high efficiency switch-mode step-down DC-DC converter converts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC) to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 5 Amps. The SDC-5 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include short-circuit, reverse polarity and over-voltage protection.
***THIS IS A MAPPED PRODUCT***
|
24 Volt, 40 Amp fully automatic three-stage advanced battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, shortcircuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks. Dimensions: 15.0"" x 9.61"" x 3.82"".
***THIS IS A MAPPED PRODUCT***
|
This high efficiency UL approved AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 30 Amps with an AC input of 120 Volts, 60 Hz (230 Volts, 50 Hz possible by internal jumper setting). This advanced switch-mode DC power supplies was designed specifically for land mobile radio applications. The power supply produces clean reliable power and is highly filtered to suppress RFI. The unit comes with front panel ammeter and voltmeter and a detachable power supply cord with NEMA 5-15P plug. Features include over-load, short-circuit, and over-temperature protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.
|
Design Features.High efficiency.Low battery voltage alarm.Protections: input low voltage, input over voltage, over temperature, over load, short circuit.Low idle power draw.Built-in electronic GFCI.Optional remote control (sold separately): Model RC-15.Comes with pin-type battery cable lugs.OUTPUT.Power, Continuous 600 Watts.Power, Surge (for Output Voltage 120 VAC +/- 3%.Output Frequency 60 Hz 60.Output Voltage Waveform Pure Sine Wave.Total Harmonic distortion INPUT.Input Voltage 10.7 to 16.5 VDC.Input Cu...
|
This charge controller is a micro-controller based for automatic, intelligent operation designed for 12 V nominal solar panels and 12 V battery systems. It has 3 Stage charging (Bulk, Absorption, Float) for 100% return of capacity and long battery life. It can be used with 2 types of batteries: Flooded/Web Cell or Sealed AGM. The SCC-1208L can manage up to 150 Watts of Solar Power.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
SAMLEX - 12090 CABINET FOR KENWOOD RADIOS TK-880 TK-760(G), TK-760H, TK-762G, TK-840, TK-860G, TK-862G, TK-780, TK-840, TK-940, TK-980, TK-981, TK-863G. NOTE: POWER SUPPLY IS NOT INCLUDED.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
CABINET FOR ICOMM RADIO. DOES NOT COME WITH POWER SUPPLY.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
SAMLEX - DC TO AC 140 WATTS (300 WATTS PEAK) POWER INVERTER WITH 1 AC OUTLET & CIGARETTE PLUG, LOW BATTERY ALARM & SHUTDOWN
|
DC-AC PURE SINE WAVE INVERTER
|
Modified Sine-wave DC-AC inverter converts 10-16.5 Volts DC to 1,750 watts of AC power at 120 Volts, 60 Hz. Output AC power is available from two standard North American NEMA 5-15R receptacles. Features include overload, over-temperature, low input and high input voltage protection. The front-end LED display indicates battery voltage and output power levels. Comes with a set of battery cable lugs. Dimensions: 3.5"" x 9.4"" x 18"".
***THIS IS A MAPPED PRODUCT***
|
This high performance 1,000 watt Pure Sine Wave inverter is ideal for powering office equipment, television, DVD, Video Games, battery chargers and other sensitive loads from your car, truck, boat, RV, or Solar System batteries. Features load controlled cooling system, high surge power (2X), soft start & low interference technology & 2 three prong outlets. Remote control with LCD display included.
***THIS IS A MAPPED PRODUCT***
|
100 watt Solar charging kit features a low profile high efficiency crystalline Solar panel that is constructed of all weather anodized aluminum and tempered glass. Includes a 30 amp charge controller, flat surface aluminum mounting brackets, wiring & installation hardware.
**THIS IS A MAPPED PRODUCT***
|
|
High efficiency 12 VDC-110 VAC 2,000 watt Pure Sine Wave (output THD< 3%) inverter. Features switch selectable output frequency 50/60 Hz, selectable power save mode, optional wired remote controls for switchhing & monitoring the operation which includes ignition lockout & reverse over-ride function, input & output are fully isolated, advanced micro-controller, 2 load controlled cooling fans save power consumption, 3 tri-color LEDa(tm)s display operational status & fault indications, short circuit, leakage, low & high DC input voltages, high tempature & reverse polarity protection. Dimensions: 16.6" x 8.18" x 6.53a
|
This combo unit to house a Motorola radio and incorporates a 10 Amp constant base station high efficiency power supply which is UL approved. Features 12 Amp surge, on/off switch on the front and rear binding posts. AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts. This advanced switch-mode DC power supply was designed specifically for use with land mobile radio. The power supply produces clean reliable power and is highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.
CABINET DESIGNED TO FIT KENWOOD RADIO MODELS NX5700, NX5800, NX5900, TK5730, TK5830 & TK5930
|
This high efficiency switch-mode step-down DC-DC converter - converts an input voltage of 24 VDC nominal (range 20 VDC to 32 VDC) to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 30 Amps. The SDC-30 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include overload, over-heating, Short circuit protection, reverse polarity and over-voltage protection.
***THIS IS A MAPPED PRODUCT***
|
The SSW Series high efficiency 350 watt pure sine wave inverter converts 12 VDC to 115 VAC at an output frequency of 60 Hz. Newly designed compact and lightweight case features soft start technology and 2X the surge.
Includes 2 three prong outlets and a USB charging port.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
The SSW Series high efficiency 600 watt pure sine wave inverter converts 12 VDC to 115 VAC at an output frequency of 60 Hz. Newly designed compact and lightweight case features soft start technology and 2X the surge.
Includes 2 three prong outlets and a USB charging port.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
The BBM-12100 12/24V 100 Amp max solid state battery back-up module is designed to provide un-interrupted DC power in association with a power supply and a battery. Transfer load between the power supply and battery is instantaneous and also provides a float charge to keep the battery charged. Max input 27.6 VDC. 2 year limited warranty.
|
|
ON/OFF Remote f/PSE Series & PST(S) Series Inverters For use with PSE inverters and Older PST-600 Watt and higher inverters. Features: RC-15 Remote control for the following inverters: PSE-12125A PSE-24125A PSE-12175A PSE-24175A PSE-12275A PSE-24275A Older PST S Series: PST-60S-12A PST-60S-24A PST-100S-12A PST-100S-24A PST-150S-12A PST-150S-24A PST-200S-12A PST-200S-24A PST E Series: PST-60S-12E PST-60S-24E PST-100S-12E PST-100S-24E PST-150S-12E PST-200S-12E WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
This remote control is intended for sue with PST Series 600 and 1000 Watt inverters. In addition to its remote on/off switch it also features LED indicators for overload overtemperature and power. Includes 15 foot cable.
|
|
Bar Meter Monitor for battery charge level and output power
LED indicator lights for:Over voltage protection
Under voltage protection
Over temperature protection
Over load protection
Power save mode
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
This combo unit to house a Motorola radio incorporates a 10 Amp constant base station high efficiency power supply which is UL approved. Features 12 Amp surge, on/off switch on the front and rear binding posts. AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts. This advanced switch-mode DC power supply was designed specifically for use with land mobile radio. The power supply produces clean reliable power and is highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.
Cabinet fits Motorola model XPR5000
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
This combo unit to house a Motorola radio incorporates a 10 Amp constant base station high efficiency power supply which is UL approved. Features 12 Amp surge, on/off switch on the front and rear binding posts. AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 10 Amps with an AC input of 120 Volts. This advanced switch-mode DC power supply was designed specifically for use with land mobile radio. The power supply produces clean reliable power and is highly filtered to suppress RFI. The unit comes with a detachable power supply cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device.
Cabinet fits Motorola models: SM50, SM120, M1225, GTX, M200, CM300, CM200D, CM300D, PM400 & XPR2500.
***THIS IS A SPECIAL ORDER ITEM*** ***THIS IS A MAPPED PRODUCT***
|
The SEC1223-XG incorporates a high efficiency 23 amp switching power supply with a durable housing for radio to provide a clean footprint. The AC-DC power converter provides a highly regulated output DC voltage of 13.8 Volts at 23 Amps with an AC input of 120 Volts, 60 Hz. The advanced switch-mode DC power supply was designed specifically for land mobile radio applications. The power supply provides clean reliable power and is highly filtered to suppress RFI. The unit comes with a detachable power cord with NEMA 5-15P plug. Features include over-current, short-circuit and over-voltage protection. The AC-DC power supply conforms to FCC Part 15(B), class B digital device. Designed to fit: HARRIS (M/A COMM) Models XG-25M, XG-75M, XG-100M, M7300, M5300, M7300, M5300, XG-75M, M7100, 500M/MDX, HDM150.
***THIS IS A SPECIAL ORDER ITEM***
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |