Shop by Brand: 303

Automobile Tonneau Cover & Convertible Top Cleaner - 16oz *Case of 6*

303 Tonneau Cover and Convertible Top Cleaner is specially formulated to clean and brighten Tonneau covers, fabric and vinyl convertible tops and car bras. Recommend to use prior to treating with 303 Fabric guard or Protectant.

Features:

• Safely cleans and brightens both hard and soft tops
• Great for use on Tonneau Covers, fabric & vinyl convertible tops, and car bras
• Rinses residue free
• Made in the U.S.A.

Usage Directions:

Rinse thoroughly to remove any loose dirt, solids and debris. While the area is still wet, apply 303 Tonneau Cover and Convertible Top Cleaner. Agitate lightly with a dampened soft nylon brush, terry cloth rag or sponge. Rinse thoroughly with clean water. For difficult stains, let cleaner stand for 10-20 minutes, before scrubbing lightly to loosen the stain. Rinse thoroughly. (Always rinse before surface dries). Warmer temperatures, agitation and longer dwell times aid the cleaning action. In cold temperatures, allow cleaner to work longer before rinsing.

Automotive Leather 3-In-1 Complete Care - 16oz

Features:

• No left behind residue
• Repels dust, lint & stains
• Conditions leather surface to prevent cracking & fading
• Provides UV protection for all finished automotive leather & vinyl
• Safe for Use on All Finished Car Leather & Vinyl Surfaces
• Made in the U.S.A.

Automotive Leather 3-In-1 Complete Care - 16oz *Case of 6*

Features:

• No left behind residue
• Repels dust, lint & stains
• Conditions leather surface to prevent cracking & fading
• Provides UV protection for all finished automotive leather & vinyl
• Safe for Use on All Finished Car Leather & Vinyl Surfaces
• Made in the U.S.A.

Black Streak Remover - 32oz

303® Black Streak Remover will keep the siding of your RV looking like new by removing unsightly black streaks with ease. These black streaks occur naturally when dirt and rubber material from an RV’s roof come off after miles of traveling at high speeds. The powerful formula in 303® Black Streak Remover pulls this material and dirt from the surface and allows it to be wiped away, leaving a clean, streak-free finish.

Features:

• Removes hard-to-clean black streaks and dirt
• Leaves a clean, streak-free finish
• Biodegradable and marine safe
• Great for use on RVs, Campers, Pop-Ups, Motorhomes, and Boats
• Safe on fiberglass, vinyl, metal, and painted surfaces

Directions:

Shake well before use. Use only on dry surfaces. Spray the product directly on the black streaks. Allow the product to remain on the surface for 2-3 minutes. Gently scrub and then wipe off with a wet towel, microfiber, or sponge. For stubborn stains, repeat as needed.

Boat Wash with UV Protectant - 32oz

Got a dirty boat? 303 Ultra Concentrated Boat Wash is proven to remove dirt, grime, and salt accumulation with ease, taking your boat back to that brand new shine. Worried about the environment?  303 Boat wash is 100% biodegradable and marine safe. It is also stain free, and won’t stain any part of your boat.  303 Boat Wash is Ultra-Concentrated, so you get more out of every bottle.  Another great thing is our formula is pH neutral, and won’t strip off any wax.  So if a deep, clean, slick boat shine is what you are looking for, this is the product for you!

Features:

• Protect the environment while maintaining your boat’s shine with this 100% Biodegradable and Marine Safe boat wash formula
• Prevent UV damage, as well as dirt, grime, salt & stains from accumulating on your boat with our ultra-concentrated formula
• Our pH neutral boat wash is specifically designed for Painted Surfaces, Gel- Coat, and Fiberglass
• 303 Boat Wash is Ultra-Concentrated, so you get more out of every bottle
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Diethanolamine which is known to the State of California to cause cancer, and Sulfur Dioxide which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Boat Wash with UV Protectant - 32oz *Case of 6*

Got a dirty boat? 303 Ultra Concentrated Boat Wash is proven to remove dirt, grime, and salt accumulation with ease, taking your boat back to that brand new shine. Worried about the environment?  303 Boat wash is 100% biodegradable and marine safe. It is also stain free, and won’t stain any part of your boat.  303 Boat Wash is Ultra-Concentrated, so you get more out of every bottle.  Another great thing is our formula is pH neutral, and won’t strip off any wax.  So if a deep, clean, slick boat shine is what you are looking for, this is the product for you!

Features:

• Protect the environment while maintaining your boat’s shine with this 100% Biodegradable and Marine Safe boat wash formula
• Prevent UV damage, as well as dirt, grime, salt & stains from accumulating on your boat with our ultra-concentrated formula
• Our pH neutral boat wash is specifically designed for Painted Surfaces, Gel- Coat, and Fiberglass
• 303 Boat Wash is Ultra-Concentrated, so you get more out of every bottle
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Diethanolamine which is known to the State of California to cause cancer, and Sulfur Dioxide which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Compound Step 1 - 12oz

Utilizing the latest in abrasive technology, 303® Compound (Step 1) removes severe defects, including swirls and deeper scrapes and scratches. It is also the first step to flawless paint depth and clarity.

Features:

• Strong and effective paint compound
• Removes up to 1500 grit scratches
• Use on both single-stage and base clear paint systems
• Can be used by hand, Rotary, or DA polisher
• Engineered to eliminate the most severe defects

Leather Cleaner - 16oz

Step 1 in the 2-step Leather system. 303® Leather Cleaner is an effective, but gentle cleaner that is great for use on both finished and unfinished types of leather.  The formula is derived from all-natural components and is pH neutral to make it safe to use without damaging your leather.  That does not mean that it sacrifices cleaning power though. 

The product removes tough stains with ease and is residue-free.  This means that the surface is clean and ready for the application of conditioner to soften and protect the surface.

Features:

• Preps surface for conditioner/protectant
• Removes tough stains with ease
• Residue-free
• Safe for use on finished and unfinished leathers
• Derived from natural components
• 15.5oz bottle

*Sold as an Individual

WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Leather Cleaner - 16oz  *Case of 6*

Step 1 in the 2-step Leather system. 303® Leather Cleaner is an effective, but gentle cleaner that is great for use on both finished and unfinished types of leather.  The formula is derived from all-natural components and is pH neutral to make it safe to use without damaging your leather. That does not mean that it sacrifices cleaning power though. 

The product removes tough stains with ease and is residue-free.  This means that the surface is clean and ready for the application of conditioner to soften and protect the surface.

Features:

• Preps surface for conditioner/protectant
• Removes tough stains with ease
• Residue-free
• Safe for use on finished and unfinished leathers
• Derived from natural components
• 15.5oz bottle

*Sold as a Case Pack

WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Aerospace Protectant - 1 Gallon

No other product provides this much protection for your boat and water gear. Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean. Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays. It’s safe for use on outdoor gear and apparel, too.

Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates. Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage. And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials—vinyl, rubber, fiberglass and more.

No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.

USAGE DIRECTIONS:

Use only on clean surfaces. For best results use 303® Multi-Surface Cleaner. Place a drop cloth under the cleaner to be treated to catch any over spray. Out of direct sun, spray surface with 303® Aerospace Protectant and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess, IMMEDIATELY WIPE COMPLETELY DRY.

Note: this product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.

Great for use on a variety of surfaces such as: vinyl, leather, plastics, synthetic & natural rubber, eisenglass, PVC, gel coat & fiberglass.

Ideal for: Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing (for your safety, never walk on a wet roof), helmets, visors, and goggles. Not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings.

303 AEROSPACE PROTECTANT HAS MANY APPLICATIONS, INCLUDING:

• Boat Interiors: Spray on your vinyl boat seats to prevent them from fading and cracking during boating season. Will also help keep them clean from dust, sand, and will help prevent those dreaded sunscreen stains
• Boat Bimini Tops: Protect your boat cover all year from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months, and in the winter, it will keep the material pliable and prevent it from drying out and cracking. 303 Aerospace Protectant will also help make snow and ice accumulation easier to remove/brush off as well.
• Boat Fenders: Use on your boat fenders to protect from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months.
• Outdoor Furniture: Keep your plastic, metal, or wicker outdoor patio furniture from fading, cracking and chalking. It will also help repel dust, dirt and grime, that can quickly accumulate on your furniture during the enjoyable BBQ season

Features:

• Powerful UV blockers prevent fading, cracking and premature aging
• Dries to a clear matte finish
• Restores lost color and luster
• Easy to use: Simply spray on and wipe dry
• Safe and effective for: vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Aerospace Protectant - 1 Gallon *Case of 4*

No other product provides this much protection for your boat and water gear. Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean. Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays. It’s safe for use on outdoor gear and apparel, too.

Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates. Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage. And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials—vinyl, rubber, fiberglass and more.

No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.

USAGE DIRECTIONS:

Use only on clean surfaces. For best results use 303® Multi-Surface Cleaner. Place a drop cloth under the cleaner to be treated to catch any over spray. Out of direct sun, spray surface with 303® Aerospace Protectant and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess, IMMEDIATELY WIPE COMPLETELY DRY.

Note: this product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.

Great for use on a variety of surfaces such as: vinyl, leather, plastics, synthetic & natural rubber, eisenglass, PVC, gel coat & fiberglass.

Ideal for: Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing (for your safety, never walk on a wet roof), helmets, visors, and goggles. Not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings.

303 AEROSPACE PROTECTANT HAS MANY APPLICATIONS, INCLUDING:

• Boat Interiors: Spray on your vinyl boat seats to prevent them from fading and cracking during boating season. Will also help keep them clean from dust, sand, and will help prevent those dreaded sunscreen stains
• Boat Bimini Tops: Protect your boat cover all year from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months, and in the winter, it will keep the material pliable and prevent it from drying out and cracking. 303 Aerospace Protectant will also help make snow and ice accumulation easier to remove/brush off as well.
• Boat Fenders: Use on your boat fenders to protect from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months.
• Outdoor Furniture: Keep your plastic, metal, or wicker outdoor patio furniture from fading, cracking and chalking. It will also help repel dust, dirt and grime, that can quickly accumulate on your furniture during the enjoyable BBQ season

Features:

• Powerful UV blockers prevent fading, cracking and premature aging
• Dries to a clear matte finish
• Restores lost color and luster
• Easy to use: Simply spray on and wipe dry
• Safe and effective for: vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov

Marine Aerospace Protectant - 16oz

No other product provides this much protection for your boat and water gear. Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean. Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays. It’s safe for use on outdoor gear and apparel, too.

Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates. Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage. And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials—vinyl, rubber, fiberglass and more.

No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.

USAGE DIRECTIONS:

Use only on clean surfaces. For best results use 303® Multi-Surface Cleaner. Place a drop cloth under the cleaner to be treated to catch any over spray. Out of direct sun, spray surface with 303® Aerospace Protectant and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess, IMMEDIATELY WIPE COMPLETELY DRY.

Note: this product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.

Great for use on a variety of surfaces such as: vinyl, leather, plastics, synthetic & natural rubber, eisenglass, PVC, gel coat & fiberglass.

Ideal for: Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing (for your safety, never walk on a wet roof), helmets, visors, and goggles. Not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings.

303 AEROSPACE PROTECTANT HAS MANY APPLICATIONS, INCLUDING:

• Boat Interiors: Spray on your vinyl boat seats to prevent them from fading and cracking during boating season. Will also help keep them clean from dust, sand, and will help prevent those dreaded sunscreen stains
• Boat Bimini Tops: Protect your boat cover all year from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months, and in the winter, it will keep the material pliable and prevent it from drying out and cracking. 303 Aerospace Protectant will also help make snow and ice accumulation easier to remove/brush off as well.
• Boat Fenders: Use on your boat fenders to protect from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months.
• Outdoor Furniture: Keep your plastic, metal, or wicker outdoor patio furniture from fading, cracking and chalking. It will also help repel dust, dirt and grime, that can quickly accumulate on your furniture during the enjoyable BBQ season

Features:

• Powerful UV blockers prevent fading, cracking and premature aging
• Dries to a clear matte finish
• Restores lost color and luster
• Easy to use: Simply spray on and wipe dry
• Safe and effective for: vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Aerospace Protectant - 16oz *Case of 6*

No other product provides this much protection for your boat and water gear. Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean. Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays. It’s safe for use on outdoor gear and apparel, too.

Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates. Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage. And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials—vinyl, rubber, fiberglass and more.

No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.

USAGE DIRECTIONS:

Use only on clean surfaces. For best results use 303® Multi-Surface Cleaner. Place a drop cloth under the cleaner to be treated to catch any over spray. Out of direct sun, spray surface with 303® Aerospace Protectant and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess, IMMEDIATELY WIPE COMPLETELY DRY.

Note: this product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.

Great for use on a variety of surfaces such as: vinyl, leather, plastics, synthetic & natural rubber, eisenglass, PVC, gel coat & fiberglass.

Ideal for: Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing (for your safety, never walk on a wet roof), helmets, visors, and goggles. Not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings.

303 AEROSPACE PROTECTANT HAS MANY APPLICATIONS, INCLUDING:

• Boat Interiors: Spray on your vinyl boat seats to prevent them from fading and cracking during boating season. Will also help keep them clean from dust, sand, and will help prevent those dreaded sunscreen stains
• Boat Bimini Tops: Protect your boat cover all year from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months, and in the winter, it will keep the material pliable and prevent it from drying out and cracking. 303 Aerospace Protectant will also help make snow and ice accumulation easier to remove/brush off as well.
• Boat Fenders: Use on your boat fenders to protect from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months.
• Outdoor Furniture: Keep your plastic, metal, or wicker outdoor patio furniture from fading, cracking and chalking. It will also help repel dust, dirt and grime, that can quickly accumulate on your furniture during the enjoyable BBQ season

Features:

• Powerful UV blockers prevent fading, cracking and premature aging
• Dries to a clear matte finish
• Restores lost color and luster
• Easy to use: Simply spray on and wipe dry
• Safe and effective for: vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer, and Ethylene Glycol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov

Marine Aerospace Protectant with Trigger Sprayer - 32oz

No other product provides this much protection for your boat and water gear. Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean. Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays. It’s safe for use on outdoor gear and apparel, too.

Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates. Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage. And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials—vinyl, rubber, fiberglass and more.

No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.

USAGE DIRECTIONS:

Use only on clean surfaces. For best results use 303® Multi-Surface Cleaner. Place a drop cloth under the cleaner to be treated to catch any over spray. Out of direct sun, spray surface with 303® Aerospace Protectant and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess, IMMEDIATELY WIPE COMPLETELY DRY.

Note: this product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.

Great for use on a variety of surfaces such as: vinyl, leather, plastics, synthetic & natural rubber, eisenglass, PVC, gel coat & fiberglass.

Ideal for: Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing (for your safety, never walk on a wet roof), helmets, visors, and goggles. Not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings.

303 AEROSPACE PROTECTANT HAS MANY APPLICATIONS, INCLUDING:

• Boat Interiors: Spray on your vinyl boat seats to prevent them from fading and cracking during boating season. Will also help keep them clean from dust, sand, and will help prevent those dreaded sunscreen stains
• Boat Bimini Tops: Protect your boat cover all year from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months, and in the winter, it will keep the material pliable and prevent it from drying out and cracking. 303 Aerospace Protectant will also help make snow and ice accumulation easier to remove/brush off as well.
• Boat Fenders: Use on your boat fenders to protect from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months.
• Outdoor Furniture: Keep your plastic, metal, or wicker outdoor patio furniture from fading, cracking and chalking. It will also help repel dust, dirt and grime, that can quickly accumulate on your furniture during the enjoyable BBQ season

Features:

• Powerful UV blockers prevent fading, cracking and premature aging
• Dries to a clear matte finish
• Restores lost color and luster
• Easy to use: Simply spray on and wipe dry
• Safe and effective for: vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Aerospace Protectant with Trigger Sprayer - 32oz *Case of 6*

No other product provides this much protection for your boat and water gear. Use Aerospace Protectant to keep your boat’s seats, sails, hull and windows colorful and clean. Marine Aerospace Protectant is a premium protectant designed to safeguard boats and boat equipment against the damaging effects of daily exposure to UV rays. It’s safe for use on outdoor gear and apparel, too.

Simply spray on and wipe dry to restore color and luster, repel stains and prevent fading even in the harshest marine conditions and sunniest climates. Aerospace Marine will even help keep fishing gear clean and prevent inflatable boats from sticking together during storage. And because it’s 100% free of grease-producing silicone oils and petroleum distillates, Aerospace is safe to use on all your outdoor materials—vinyl, rubber, fiberglass and more.

No other protectant beautifies as intensely or preserves as powerfully. Keep your boat, water sport equipment and outdoor gear shiny season after season.

USAGE DIRECTIONS:

Use only on clean surfaces. For best results use 303® Multi-Surface Cleaner. Place a drop cloth under the cleaner to be treated to catch any over spray. Out of direct sun, spray surface with 303® Aerospace Protectant and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess, IMMEDIATELY WIPE COMPLETELY DRY.

Note: this product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.

Great for use on a variety of surfaces such as: vinyl, leather, plastics, synthetic & natural rubber, eisenglass, PVC, gel coat & fiberglass.

Ideal for: Hypalon inflatable boats, wet/dry suits, tires, side-out seals, RV EDPM rubber roofing (for your safety, never walk on a wet roof), helmets, visors, and goggles. Not for use on unfinished leathers (such as suede), fabrics (canvas) or floorings.

303 AEROSPACE PROTECTANT HAS MANY APPLICATIONS, INCLUDING:

• Boat Interiors: Spray on your vinyl boat seats to prevent them from fading and cracking during boating season. Will also help keep them clean from dust, sand, and will help prevent those dreaded sunscreen stains
• Boat Bimini Tops: Protect your boat cover all year from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months, and in the winter, it will keep the material pliable and prevent it from drying out and cracking. 303 Aerospace Protectant will also help make snow and ice accumulation easier to remove/brush off as well.
• Boat Fenders: Use on your boat fenders to protect from the sun’s harmful UV rays (which can cause fading/cracking) in the summer months.
• Outdoor Furniture: Keep your plastic, metal, or wicker outdoor patio furniture from fading, cracking and chalking. It will also help repel dust, dirt and grime, that can quickly accumulate on your furniture during the enjoyable BBQ season

Features:

• Powerful UV blockers prevent fading, cracking and premature aging
• Dries to a clear matte finish
• Restores lost color and luster
• Easy to use: Simply spray on and wipe dry
• Safe and effective for: vinyl, Plexiglas®, carbon fiber, rubber, plastics and finished leather
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Clear Vinyl Protective Cleaner with Trigger Sprayer - 32oz

303 Clear Vinyl Protective Cleaner offers superior protection against the harmful effects of UV rays. This product is all you need to safely clean and protect against yellowing and cracking of vinyl, clear vinyl, Strataglass and Eisenglass boat windows, leaving a non-streaking finish.

USAGE DIRECTIONS:

Place a drop cloth under the item to be treated to catch any overspray.  Do not use in direct sunlight. Spray surface with Clear Vinyl Protective Cleaner and WIPE COMPLETELY DRY. If streaking occurs, too much product has been used. Use a wet towel to remove excess. IMMEDIATELY WIPE COMPLETELY DRY.

Note: This product does not air dry. Extra buffing with a dry cloth INCREASES bonding, repellency & longevity. Apply every 3-5 weeks for maximum UV protection.

303 CLEAR VINYL PROTECTIVE CLEANER IS SAFE TO USE ON A VARIETY OF SURFACES, SUCH AS:

• Interiors
• Weather Enclosures
• Hulls
• Windshields

Features:

• Safely cleans and protects against yellowing and cracking of vinyl and clear vinyl
• Safe for use on vinyl windows like Strataglass™ and Eisenglass
• Leaves a non-streak finish with no left behind residue
• Provides superior UV protection
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Fabric Guard - 1 Gallon

Features:

• Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
• Safe for synthetic and natural fibers in marine environments
• Protects against both water-based and oil-based stains
• Does not alter fabric color, feel, flammability or breathability
• Recommended by Sunbrella®, leading outdoor fabric manufacturer
• Made in the U.S.A.

303 Fabric Guard is the only product recommended by and for Sunbrella, as well as other fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come. 

USAGE DIRECTIONS:

• Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
• NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.
• CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.
• COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.

EXAMPLE USE CASES:

BOAT CUSHION

• Untreated: Cushions are stained and water soaks into the fabric.
• Treated with 303 Fabric Guard: Water and soil repel the fabric, prolonging its life.

UMBRELLA

• Untreated: The umbrella is stained with outdoor elements and rain.
• Treated with 303 Fabric Guard: Water and soil repel the fabric and it is protected from outdoor elements.

Marine Fabric Guard - 1 Gallon *Case of 4*

303 Fabric Guard is the only product recommended by and for Sunbrella, as well as other fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come. 

Features:

• Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
• Safe for synthetic and natural fibers in marine environments
• Protects against both water-based and oil-based stains
• Does not alter fabric color, feel, flammability or breathability
• Recommended by Sunbrella®, leading outdoor fabric manufacturer
• Made in the U.S.A.

USAGE DIRECTIONS:

• Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
• NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.
• CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.
• COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.

EXAMPLE USE CASES:

BOAT CUSHION

• Untreated: Cushions are stained and water soaks into the fabric.
• Treated with 303 Fabric Guard: Water and soil repel the fabric, prolonging its life.

UMBRELLA

• Untreated: The umbrella is stained with outdoor elements and rain.
• Treated with 303 Fabric Guard: Water and soil repel the fabric and it is protected from outdoor elements.

Marine Fabric Guard with Trigger Sprayer - 16oz

303 Fabric Guard is the only product recommended by and for Sunbrella, as well as other fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.

USAGE DIRECTIONS:

Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.

NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.

CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.

COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.

EXAMPLE USE CASES:

BOAT CUSHION

• Untreated: Cushions are stained and water soaks into the fabric.
• Treated with 303 Fabric Guard: Water and soil repel the fabric, prolonging its life.

UMBRELLA

• Untreated: The umbrella is stained with outdoor elements and rain.
• Treated with 303 Fabric Guard: Water and soil repel the fabric and it is protected from outdoor elements.

Features:

• Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
• Safe for synthetic and natural fibers in marine environments
• Protects against both water-based and oil-based stains
• Does not alter fabric color, feel, flammability or breathability
• Recommended by Sunbrella®, leading outdoor fabric manufacturer
• Made in the U.S.A.

Marine Fabric Guard with Trigger Sprayer - 32oz

303 Fabric Guard is the only product recommended by and for Sunbrella, as well as other fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.

USAGE DIRECTIONS:

Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.

NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.

CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.

COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.

EXAMPLE USE CASES:

BOAT CUSHION

• Untreated: Cushions are stained and water soaks into the fabric.
• Treated with 303 Fabric Guard: Water and soil repel the fabric, prolonging its life.

UMBRELLA

• Untreated: The umbrella is stained with outdoor elements and rain.
• Treated with 303 Fabric Guard: Water and soil repel the fabric and it is protected from outdoor elements.

Features:

• Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
• Safe for synthetic and natural fibers in marine environments
• Protects against both water-based and oil-based stains
• Does not alter fabric color, feel, flammability or breathability
• Recommended by Sunbrella®, leading outdoor fabric manufacturer
• Made in the U.S.A.

Marine Fabric Guard with Trigger Sprayer - 16oz *Case of 6*

303 Fabric Guard is the only product recommended by and for Sunbrella, as well as other fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more! When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.

USAGE DIRECTIONS:

Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.

NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured.

CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303 Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric.

COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.

EXAMPLE USE CASES:

BOAT CUSHION

• Untreated: Cushions are stained and water soaks into the fabric.
• Treated with 303 Fabric Guard: Water and soil repel the fabric, prolonging its life.

UMBRELLA

• Untreated: The umbrella is stained with outdoor elements and rain.
• Treated with 303 Fabric Guard: Water and soil repel the fabric and it is protected from outdoor elements.

Features:

• Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
• Safe for synthetic and natural fibers in marine environments
• Protects against both water-based and oil-based stains
• Does not alter fabric color, feel, flammability or breathability
• Recommended by Sunbrella®, leading outdoor fabric manufacturer
• Made in the U.S.A.

Marine Graphene Nano Spray Coating - 32oz

303® Graphene Nano Spray Coating™ is a Graphene Oxide-based coating that provides a high level of protection lasting up to 12 months.  This product also lowers surface temperature, which will reduce the number of hard water spots you get on your car’s paint.  It also features a high-water contact angle, producing substantial hydrophobic properties that keep the water from sticking to your paint.  Following application, the paint will also have enhanced gloss and clarity.

It bonds to the surface without prior paint correction or decontamination and is difficult to mess up the application.  Sprayed it on and let it sit too long, or missed a spot when buffing it off?  No problem, just come back and buff the remaining product off.  No need for machine correction of high spots. It can also be applied in direct sunlight.  Applying it in direct sunlight can make the application process easier, as the heat helps the product cure faster. It can be used on multiple surfaces, including paint, glass, wheels, trim, and more!

Features:

• Protects glass from chips and cracks, repels water while driving
• Coats and protects the paint from scratches leaving a hard layer of protection
• 1+ year of premium protection
• Lowers surface temperature, reducing water-spotting
• Repels brake dust and helps keep your wheels looking clean
• High water contact angle, sheds water quickly
• Can be applied on black paint or in direct sunlight
• Great for use on chrome, wheels, trim, and glass

*Sold as an Individual

WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Marine Quick Wax with Trigger Sprayer - 32oz

303® Quick Wax is the fastest solution for making your boat shine.  This formula is a gentle cleaner that helps remove water spots, dust, and other debris from the hard surfaces on your boat, and it leaves a protective layer that helps repel these elements during your next trip out on the water. It also contains superior UV protection that lasts up to 30 days, preventing color fading.  303® Quick wax contains Carnauba wax.

USAGE DIRECTIONS:

Apply product onto a cool, clean surface. Out of direct sunlight, spray 303 Quick Wax onto surface to be treated in a uniform misting pattern.  Evenly spread the misted product over the area to be treated using a 100% cotton terry or microfiber towel.  Allow the 303® Quick Wax to haze, and then buff surface with a separate, clean 100% cotton terry or microfiber towel. Do not use on EXTREMELY DIRTY surfaces, or on surfaces that may become slippery such as steps, controls, grips, non-skid surfaces, vinyl and/or canvas. Quick Wax is safe and effective on Fiberglass gel coat, painted metals and plastics, stainless steel, aluminum and other non-porous surfaces.

Features:

• The fastest boat wax solution for making your boat shine
• Long lasting, water spot preventing spray on boat wax
• Marine safe wax that gently cleans, and leaves a protective glossy shine
• Provides UV Protection that prevents color fading
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Quick Wax with Trigger Sprayer - 32oz *Case of 6*

303® Quick Wax is the fastest solution for making your boat shine.  This formula is a gentle cleaner that helps remove water spots, dust, and other debris from the hard surfaces on your boat, and it leaves a protective layer that helps repel these elements during your next trip out on the water. It also contains superior UV protection that lasts up to 30 days, preventing color fading.  303® Quick wax contains Carnauba wax.

USAGE DIRECTIONS:

Apply product onto a cool, clean surface. Out of direct sunlight, spray 303 Quick Wax onto surface to be treated in a uniform misting pattern.  Evenly spread the misted product over the area to be treated using a 100% cotton terry or microfiber towel.  Allow the 303® Quick Wax to haze, and then buff surface with a separate, clean 100% cotton terry or microfiber towel. Do not use on EXTREMELY DIRTY surfaces, or on surfaces that may become slippery such as steps, controls, grips, non-skid surfaces, vinyl and/or canvas. Quick Wax is safe and effective on Fiberglass gel coat, painted metals and plastics, stainless steel, aluminum and other non-porous surfaces.

Features:

• The fastest boat wax solution for making your boat shine
• Long lasting, water spot preventing spray on boat wax
• Marine safe wax that gently cleans, and leaves a protective glossy shine
• Provides UV Protection that prevents color fading
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Speed Detailer with Trigger Sprayer - 32oz

303 Speed Detailer is a premium formula designed to instantly clean, protect and produce a high-gloss finish on surfaces. It cleans, protects and shines fiberglass, paint, plastics, metals, and glass. Quick and easy to use, simply mist on and wipe off. Anti-static, repels dust, dirt and stains and helps protect against light surface scratches. 303 Speed Detailer is engineered with powerful UV blockers, to prevent fading of your boat’s paint. 303 Speed Detailer wipes dry with no streaking or hazing, leaving a high gloss finish instantly. If you want the shine that your boat deserves, reach for 303 Speed Detailer. It’s simple and easy to use.

USAGE DIRECTIONS:

Shake Well. Make sure the surface is dry and cool. Spray product onto one section at a time. Spread product with soft, clean microfiber towel. Buff with 2nd dry microfiber towel.

Features:

• Anti-static, repels dust, dirt and stains
• Protects against light surface scratches
• Powerful UV blockers protect your boat between washes and prevents paint fading
• Quick and easy application
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Touchless Sealant - 128oz

Have you had trouble finding time to fully wax your car?  303® Touchless Sealant will save you hours! This Si02 formula is a completely TOUCHLESS quicker alternative to waxing your vehicle. Simply spray on, and rinse off – it’s that easy!  It only takes minutes to get that same water beading protection you get from a full wax, saving you hours spent in the garage.   It’s also great for those looking to prolong the time in between waxes, or ceramic coatings. Safe for clear coat, gel coat, fiberglass, plastics, windshields, and wheels too!

Usage Directions:

Wash your car out of direct sunlight while the surface is cool. While the surface is still wet and out of direct sunlight, spray a small amount of product evenly across the surface, treating one section of the vehicle at a time. Only a light mist of the product is needed. Immediately rinse the section off. You will see water beading on the surface, meaning it is now protected. Repeat the steps on all sections of the vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel.

Features:

• Provides superior water beading
• Protects against paint fading
• Lasts up to 2x longer than traditional wax!
• Simply spray on, and rinse!
• Also great for use on windshields and wheels!
• 128 fluid oz.

303 Touchless Sealant is safe to use on a variety of surfaces, such as:

• Paint
  • Clear coat
  • Wheels
  • Glass
  • Plastics
  • Fiberglass
  • Gel-coat
  • Aluminium
  • Hard plexiglass
  • And more!

Marine Touchless Sealant - 32oz

Features:

• Provides superior water beading
• Protects against paint fading
• Lasts up to 2x longer than traditional wax!
• Simply spray on, and rinse!
• Also great for use on windshields and wheels!
• 32oz bottle
• Made in the U.S.A.

Marine Touchless Sealant - 32oz *Case of 6*

Features:

• Provides superior water beading
• Protects against paint fading
• Lasts up to 2x longer than traditional wax!
• Simply spray on, and rinse!
• Also great for use on windshields and wheels!
• 32oz bottle *Case of 6*
• Made in the U.S.A.

Mold & Mildew Cleaner & Blocker with Trigger Sprayer - 16oz

303® Mold & Mildew Cleaner + Blocker quickly and safely cleans and removes tough mold and mildew stains from virtually any water-safe surface. Not only does this product CLEAN unsightly mold and mildew stains that have already formed, it will also help PREVENT mold and mildew stains from re-occurring on the treated surface. Unlike other mold & mildew cleaner products on the market, this product does NOT contain bleach, and will leave behind a fresh scent, with no strong odors to worry about during or after use. Works safely on vinyl, plastic, painted surfaces and even safe enough for use on fabric!

Features:

• Quickly removes mold & mildew stains on contact
• Blocks mold & mildew stains from re-occurring
• Does not contain bleach, leaves behind a fresh scent
• Works on ALL water-safe surfaces, including vinyl & fabrics
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Diethanolamine which is known to the State of California to cause cancer, and Sulfur Dioxide which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Mold & Mildew Cleaner & Blocker with Trigger Sprayer - 32oz

303® Mold & Mildew Cleaner + Blocker quickly and safely cleans and removes tough mold and mildew stains from virtually any water-safe surface. Not only does this product CLEAN unsightly mold and mildew stains that have already formed, it will also help PREVENT mold and mildew stains from re-occurring on the treated surface. Unlike other mold & mildew cleaner products on the market, this product does NOT contain bleach, and will leave behind a fresh scent, with no strong odors to worry about during or after use. Works safely on vinyl, plastic, painted surfaces and even safe enough for use on fabric!

Features:

• Quickly removes mold & mildew stains on contact
• Blocks mold & mildew stains from re-occurring
• Does not contain bleach, leaves behind a fresh scent
• Works on ALL water-safe surfaces, including vinyl & fabrics
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Diethanolamine which is known to the State of California to cause cancer, and Sulfur Dioxide which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Mold & Mildew Cleaner & Blocker with Trigger Sprayer - 16oz *Case of 6*

303® Mold & Mildew Cleaner + Blocker quickly and safely cleans and removes tough mold and mildew stains from virtually any water-safe surface. Not only does this product CLEAN unsightly mold and mildew stains that have already formed, it will also help PREVENT mold and mildew stains from re-occurring on the treated surface. Unlike other mold & mildew cleaner products on the market, this product does NOT contain bleach, and will leave behind a fresh scent, with no strong odors to worry about during or after use. Works safely on vinyl, plastic, painted surfaces and even safe enough for use on fabric!

Features:

• Quickly removes mold & mildew stains on contact
• Blocks mold & mildew stains from re-occurring
• Does not contain bleach, leaves behind a fresh scent
• Works on ALL water-safe surfaces, including vinyl & fabrics
• Made in the U.S.A.

WARNING: This product can expose you to chemicals including Diethanolamine which is known to the State of California to cause cancer, and Sulfur Dioxide which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.