Automatic Bilge Pump 750 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Features:
Specifications:
*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance |
Ballast Pump FIP F4 12V DC 12V F4-size ballast pump with a capacity of 55 L/min (14.25 GMP). This pump is used for ballast pumping of water between tanks. Features:
Specifications:
|
Bilge Stainer Horizontal 25mm (1"), 38mm (1-1/2") Horizontal mounted bilge strainer with non-return valve. Features:
|
Cartridge Bilge Pump 500GPH - 12V Submersible bilge pump 12V with pump capacity 32 L/min (500 GPH) and 25 L/min (400 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install. Features:
Specifications:
|
Compact Waste Water Diaphragm Pump - 22L(5.8GPM) - 24V The most compact single chamber, self priming, diaphragm pump 12V for grey or bilge water. Shower drain, transfer or pump out. Capacity 22 L/min (5,8 GPM), flexible and very compact installation with 360 degree rotational in-line ports. Quiet operation and low power consumption. Operates with no need for filter. Including 19mm (3/4″) and 25mm (1″) straight connectors. 2.5A fuse. Specifications:
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance |
DC Driven Circulation Pump with Brushless Motor - BL30CM 12V This circulation pump is for the circulation of water/antifreeze in heating or cooling systems on boats, buses, motor homes, and commercial vehicles. There are many advantages to this pump, such as its small size with high efficiency, maintenance-free, ceramic shaft, carbon fiber sleeve, completely waterproof (IP68), brushless DC control, and long service life. Features:
Specifications:
*Includes pump and motor |
Electronic Bilge Switch - 12/24V The 12/24V electronic bilge switch activates your bilge pump automatically when water exceeds the acceptable level and deactivates when the water has been removed. Switches DC positive and can be used with PN 01-66-027, Bilge Pump Panel 3-way 12/24V, in combination with any bilge pump. For fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Fully sealed without any moving parts. Will not corrode and are not affected by oil or debris. *Note: The product picture shows a similar product and the electronic bilge switch looks slightly different from the digital bilge switch. |
Engine Cooling Pump for Kohler Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models:
Replaces Pump:
|
Engine Cooling Pump for Kohler - 5-7 Diesel kW Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models:
Replaces Pump:
|
Engine Cooling Pump for Kohler - 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, & 8EFKD Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models:
Replaces Pump:
|
Engine Cooling Pump for Kohler 4-6 Cylinder Diesel - 4-6.5kW Gas - 12.5 kW Gas Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models:
Replaces Pump:
|
Gobius C External Fluid Level Sensor/Tank Monitor Plug and play installation. No disassembly of the tank is needed. Measures from the top, never a risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe, and an extra 3M sensor tape. Handles voltage of 12-24 Volts. The sensor is mounted in the same simple way as other Gobius products but on the top of the tank. Max. tank depth is 2 meters. Can be connected to control systems and analog instruments such as KUS, VDO, WEMA, and Faria (10-190 Ohm, 240-33 Ohm, 4-20 mA, and 0-5 V). In addition, there is two individual on/off outputs to signal when the tank is empty and full. Installation is done from your phone via Bluetooth. The app is available in English, French, German, Italian, Spanish, and Swedish. Features:
Measurement Functions:
Specifications:
Software:
|
Gobius Pro 1 External Fluid Level Sensor Install, make settings, and see the results on your smartphone. Free App for iPhone and Android phones included. You can use Gobius Pro for all liquids and tank materials. 12 – 24 Volts. Choose water, fuel, waste, or other fluids. You can have max 9 sensors/tank. Features:
Works with the following tank materials:
|
General Purpose Pump FIP F4 (12 GPM) - 12V DC 12V F4 size FIP pump with capacity 45 L/min (12 GMP). Used for pumping water, oils and chemicals. Features:
Specifications:
*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance |
Standard Electric Toilet Conversion Kit - 12V Converts your manual or silent electric toilet to a 12V one cycle electric operated version. Features:
Specifications:
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance |
Toilet Standard Electric EVO Compact - 12V Standard electric compact toilet with a combined electrical 12V macerator and pump for waste disposal and flushing in one single operation. Including one touch electrical control panel. Easy to clean white ceramic bowl and white wooden seat. Stable base for robust installation. Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Plug & play/ interchangeable with Jabsco 37010-0090, Johnson Pump 80-47435-01 and other single operated electrical toilet models. Specifications:
*Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance |
Marine Valve Kit Features:
|
Premium Impeller Kit 57 x 12.7 x 20mm - 12 Blade - Key Insert Replaces JMP 7110-01, Sherwood 10077K. Specifications:
|
Replacement Cartridge for 500GPH - 12V Albin Group's replacement cartridge for 500 GPH and 12V. |
Replacement Cartridge for 750 GPH - 12V Albin Group's replacement cartridge for 750 GPH and 12V. |
Replacement Cartridge for 1100 GPH - 12V Albin Group's replacement cartridge for 1100 GPH and 12V. |
Wash Down Pump - 12V - 5.2 GPM Premium wash down pump 12V with capacity 20l/min (5,2GPM). For efficient deckwash or wash down duties. Cut off pressure 5bar (70psi). Features:
Specifications:
|
3-Way Bilge Panel - 12/24V Three- positions switch bilge pump control panel 12/24V. Manual, automatic and off. The automatic feature operates in combination with automatic bilge level switches or automatic bilge pumps. Integrated fuse holder, fuse and operating light. |
Accumulator Tank - 0.85L (0.22g) Accumulator and pulsation dampering tank for water pressure systems. Premium solution for a maximum smoothness flow system. Corrosion free. |
Automatic Bilge Pump 1100 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Fixed 29 mm (1,15″) straight discharge port. 4A fuse. For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length. Features: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in Automatic Submersible CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance |
Automatic Bilge Pump 1100 GPH - 24V Fully automatic bilge pump 24V, automatic activation with a built in electrical level switch. Pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Fixed 29 mm (1,15″) straight discharge port. 2,5A fuse. For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length. Features:
|
Automatic Bilge Pump 500 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 32 L/min (500 GPH) and 25 L/min (400 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Including 19 mm (3/4″) straight and elbow detachable discharge ports. 1,8A fuse. For pleasure boats up to 6m (20 Ft) length. Features:
|
Automatic Bilge Pump 750 GPH - 24V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Including 19 mm (3/4″) straight and elbow detachable discharge ports. 2,7A fuse. For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length. Features:
|
Bilge Float Switch - 12/24/30V The 12/24/30V bilge float switch activates your bilgepump automatically when water exceeds the acceptable level and deactivate when water has been removed. For a fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Safe removal of bilgewater when nobody is onboard, approved for 500 000 cycles. 14A fuse. Features:
|
Bilge Pump Heavy Duty 1750 GPH - 12V Submersible heavy duty bilge pump 12V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design. Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 6A fuse. For pleasure or commercial boats above 10m (30Ft) length. Interchangeable with Rule 1500, Johnson Pump 16004-00 /32-1600-01. Features:
|
Bilge Pump Heavy Duty 1750 GPH - 24V Submersible heavy duty bilge pump 24V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design. Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 3A fuse. For pleasure or commercial boats above 10m (30 Ft) length. Interchangeable with Rule 1500, Johnson Pump 16084-00/32-1600-02. Features:
|
Bilge Pump Heavy Duty 2250 GPH - 12V Submersible heavy duty bilge pump 12V with pump capacity 140 L/min (2250 GPH) and 120 L/min (1900 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design. Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 8A fuse. For pleasure or commercial boats above 12m (36 Ft) length. Interchangeable with Rule 2000, Johnson Pump 22004/32-2200-01. Features:
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |