Shop by Brand: Cole Hersee

2 Pole Plug & Socket Connector with Rubber Cap

Polarized connector pair meant for marine applications. Completed assembly with male and female connectors, this ships without leads and requires wire insertion and termination before installation.

Specifications:

• Housing: Black thermoplastic
• Circuitry: 2
• Input Terminals: Brass
• Contact Material: Screw

2 Pole Trailer Connector

Plug Socket, Brass, Trailer Connector, Flat, 3 Pole

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2 Position Brass Ignition Switch

Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.

3 Pole Trailer Connector

Plug Socket, Trailer Connector, Flat, 3 Pole

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3 Position Brass Ignition Switch

Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off. 

3 Position Brass Ignition Switch with Rubber Boot

Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.

3 Position Plastic Body Ignition Switch

15A rugged plastic ignition switches for marine applications.

Impact-resistant body cannot ruse or corrode. Ignition switches operate similarly to traditional switches: "Run" position actuates radio, radar, blower, lights and other accessories. Fits most OEM applications with a standard 7/8" mounting hole.

• Ratings at 6-36V DC: 15A Ignition, 5A Start
• Key is removable only in the Off position. Spring return to Ign.
• 3 nickel-silver screw terminals
• Durable plastic case and stem with PVC boot for added weather protection
• Mounting stem fits panels up to 7/8: (22.2mm) thick, with 7/8" diameter hole
• Fits many boats, including Baja, Celebrity, Chapparral, ChrisCraft, Luhrs, larson, FourWinns, Crest5liner, Mariah, Powerquest, Rinker, S2 Yachts, Silverton Yacht, Thompson, Thunderbird (Formula), Wellcraft

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3 Position Sealed Ignition Switch

An extensive series of ignition switches that can also be used as rotary switches.

Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. Has an integral Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust.

UL-recognized. tested to SAE J259 for ignition switches.

Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC.

Contacts are sealed front and back to IP67 (with connector installed).

Many options available: 2- 3- or 4-position, with keys or actuator; with or without boot, various key code options, with or without anti-restart or spring return.

Some options (2 keys are provided with each keyswitch):

• Single tumbler key code only - all locks are identical
• Mixed key codes
• 200 random key codes
• 10 mixed key codes
• 10 random key codes
• Soft touch knob 81397
• No lock, no knob. Switch has 1/4" D-shaft only, to accept customer's knob
• Chrome-plated diecast lever 81254 instead of lock

4 Pole Plug & Socket Connector with Rubber Cap

Normally used with a trailer where only limited functionality (taillights. brake lights) is needed. Ideal for boat trailers or RVs towing a car on a flatbed trailer.

Features:

• Diecast metal housings
• Screw terminals accept up to 12 AWG wire.
• Replaceable interiors
• Brass split-pin contacts are aligned to assure proper contact and minimal voltage drop
• Spring-loaded socket doors (the plug locks securely into the opening)
• Wiring codes are identified on the insulator
• Two mounting holes on the flange are 17/64" (6.7 mm) in diameter. 2-15/16" (74.6 mm) in centers.
• Mount through a 1 3/8" (34.9 mm) diameter hole.
• With special housing that protects terminals from road splash

Specifications:

• Housing: Plated steel
• Circuitry: 4
• Input Terminals: Brass
• Contact Material: Screw

4 Position Brass Ignition Switch

Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.

4 Position General Purpose Ignition Switch

Universal Rotary/Compact Ignition and Start Switch. Universal Rotary/Compact Ignition and accessories.

4 Position Sealed Ignition Switch

An extensive series of ignition switches that can also be used as rotary switches. Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. Has an integral Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust. UL-recognizedand tested to SAE J259 for ignition switches. Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. Contacts are sealed front and back to IP67 (with connector installed). Many options available: 2- 3- or 4-position, with keys or actuator; with or without boot, various key code options, with or without anti-restart or spring return.

Some options (2 keys are provided with each keyswitch):

• Single tumbler key code only - all locks are identical
• Mixed key codes. 200 random key codes
• 10 mixed key codes.10 random key codes
• Soft touch knob 81397
• No lock, no knob. Switch has 1/4" D-shaft only, to accept customer's knob
• Chrome-plated diecast lever 81254 instead of lock

6 ATO Standard Series Fuse Block with Ground Bus

6 ATO ST Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. These products are RoHS compliant. 

Features:

• Carded blister packaging for simple retail display
• Snap-on insulating cover (included) with label recesses & spare fuse holder
• Screw termination
• Integrated negative busbar
• Includes sheet of circuit identification labels
• Centralizes wiring to a convenient location
• The insulating cover provides circuitry protection
• Continuous current rating of 100A
• Current rating max per circuit: 30A Max

Applications:

• Centralized distribution for accessory circuits
• Ideal solution for DIY projects

*Fuses not included

Compact Battery Switch - 150A

Upgraded design with bigger contacts (M10) and improved components for heavier 150A current loads even if keeping the compact dimensions, which make it one of the more popular products for 12V applications. Features a removable handle with a plastic body. Rubber cap is included for protection while switch is removed from the socket. 

Specifications:

• Actuation Type: Lever Key
• Terminal Gender: Male
• Throw Type: Single
• Amperage (A): 150 Amp
• Number of Terminals: 2
• Terminal Type: Stud
• Voltage (V): 12 to 24 Volts

Continuous Duty Solenoid - 12V - PVC Coated

Features:

• Hex nuts and lock washers are included
• Steel housing mounting holes: 5/16 x 19/32,” 2 13/64” on centers (7.9 x 15.1, 56.0mm)
• Plated steel housing available with optional PVC coating available to protect critical components from environmental hazards
• 12 Volt
• PVC Coated
• 65 Amps
• Insulated
• Contact: Copper
• UL Listed

Continuous Duty Solenoid - 200A - 12V

Relays are commonly referred to as remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements.

Specifications:

• Current Rating (Continuous) in Amps: 200
• Circuitry: SPST
• Normal Position: Normally Open
• Contact Material: Silver
• Housing: Plated Steel

Continuous Duty Solenoid 65 Amp 12V UL Listed

Relays are commonly referred to as a remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements.

Features:

• 65 Amp
• 12V
• Copper Contact Stud Material
• Steel Coil Stud Material
• Normally Open Contacts

Continuous Duty Solenoid - 12V

Minimizes arcing and contact oxidation, maintains highp erformance. Universal use with part numbers available to handle loads up to 200A.

PVC Coated option available for a more environmentally sealed product. Coated solenoids withstand moisture and dust to IP66.

Mechanical Specifications:

• SPST Normally open contacts
• Plated steel housing. Hexnuts and washers included
• Large (power circuit) battery studs; copper
• 5/16” -24 thread
• Small (control circuit) coil studs; steel 10-32 thread
• Bracket mounting holes 5/16 X 19/32” (7.9 X 15.1mm) on
• 2 13/64” centers (56.0mm)
• Available with PVC coated exterior or Potted Coil interiors
• for harsh environments or vibration resistance
• Caution: Never unscrew the inner hexnuts on the studs
• These keep the stud and inner wiring in place

Electric Windshield Wiper Switch 3-Position - 12V/24V - 4-Blade

Universal application. For stem- or bracket-mounting. 15/32”-32 thread mounting stem, with keyway. 

Features:

• Intermittent delay feature for permanent magnet electric wiper motors
• Negative ground only 
• Three positions: Off/Park - Low - High • 7/16”-28 x .45” (11.3mm) mounting stem unless noted otherwise 
• Round black plastic, white imprinted knob with metal insert and set screw included unless noted otherwise 
• Controls single motor unless noted otherwise

Heavy Duty Push Button Switch SPST Off-On 2 Screw - 35A

Features:

• 35A at 12V, 20A at 24V, 10A at 36V DC
• Normally Off, push to On
• Two brass screw terminals
• Mounting stem; brass 5/8" -32 thread, 1 3/8: (34.9mm) long, fits panels up to 1" (25.4mm) thick
• Silver contacts

Heavy Duty Push Button Switch w/Gasket Seal SPST Off-On 2 Screw - 10A

Features:

• Normally Off, push to On
• Two brass screw terminals
• Mounting stem; brass 5/8" -32 thread, 1 3/8: (34.9mm) long, fits panels up to 1" (25.4mm) thick
• Silver contacts
• Gasket Seal

Heavy Duty Push Button Switch w/Rubber Cap SPST Off-On 2 Screw - 35A

Features:

• 35A at 12V, 20A at 24V, 10A at 36V DC
• Normally Off, push to On
• Two brass screw terminals
• Mounting stem; brass 5/8" -32 thread, 1 3/8: (34.9mm) long, fits panels up to 1" (25.4mm) thick
• Silver contacts
• With snap-on black rubber cap

Heavy Duty Toggle Switch DPDT (On)-Off-(On) 6 Screw

Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

Heavy Duty Toggle Switch DPDT Off-(On) 2 Wire

Features:

• 25 A at 12 V DC; 15 A at 24 V DC; 10 A at 36 V DC 
• SIlver contacts
• Nickel-plated brass handle

Heavy Duty Toggle Switch DPDT On-Off-On 6 Screw

Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

Heavy Duty Toggle Switch DPST On-Off 4-Screw

Cole Hersee's Heavy Duty DPST Toggle Switch, 4 Screw Terminals, 25 A Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

Heavy Duty Toggle Switch SPDT (On)-Off-(On) 3 Screw

Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

Heavy Duty Toggle Switch SPDT (On)-Off-(On) 3 Wire

Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

Heavy Duty Toggle Switch SPDT On-Off-(On) 3 Screw

Features:

• Standard handle
• Universal application
• Silver contacts
• Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm)
• Phenolic housing, with plated steel cap
• Nickel-plated brass mounting hardware
• Three screw terminals: 6-32 screws
• 25A at 12V, 15A at 24V, and 10A at 36V DC. Up: On, Center: Off, Down: Mom On