Shop by Brand: Fireboy-Xintex

CO Alarm 12/24V DC - White

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

• Microprocessor controlled
• Compact design for inconspicuous protection
• Time-weighted average CO measurement process constantly monitors all CO levels
• Highly resistant to most chemicals, solvents & cleaners
• CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries

Technical Specifications:

• Power Usage - 4 mA
• Alarm Point - 10% COHb
• Alarm Horn - 85 dBA
• Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
• Interconnect Functionality - No

*Sold as an Individual 

CO Alarm 12/24V DC with Interconnect - Black  

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

• Interconnect up to ten (10) CO alarms - all connected CO alarms sound together 
• Microprocessor controlled
• Compact design for inconspicuous protection
• Time-weighted average CO measurement process constantly monitors all CO levels
• Highly resistant to most chemicals, solvents & cleaners
• CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries

Technical Specifications:

• Power Usage - 4 mA
• Alarm Point - 10% COHb
• Alarm Horn - 85 dBA
• Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
• Interconnect Functionality - Yes

*Sold as an Individual 

CO Alarm 12/24V DC with Interconnect - Black  

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

• Interconnect up to ten (10) CO alarms - all connected CO alarms sound together 
• Microprocessor controlled
• Compact design for inconspicuous protection
• Time-weighted average CO measurement process constantly monitors all CO levels
• Highly resistant to most chemicals, solvents & cleaners
• CMD6-MD 12/24V DC model uses boat power and has permanent internal backup Lithium-metal batteries

Technical Specifications:

• Power Usage - 4 mA
• Alarm Point - 10% COHb
• Alarm Horn - 85 dBA
• Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
• Interconnect Functionality - Yes

*Sold as an Individual 

CO Alarm Internal Battery - White

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

• Microprocessor controlled
• Compact design for inconspicuous protection
• Time-weighted average CO measurement process constantly monitors all CO levels
• Highly resistant to most chemicals, solvents & cleaners
• CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.  

Technical Specifications:

• Power Usage - None
• Alarm Point - 10% COHb
• Alarm Horn - 85 dBA
• Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
• Interconnect Functionality - No

*Sold as an Individual 

CO Alarm Internal Battery w/Interconnect - White

A Carbon Monoxide (CO) detector should be installed in each accommodation space.  Small crafts or RV's with an open design may require only one (1) detector for adequate protection.  If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in each of the spaces.

The Fireboy-Xintex CMD6-M Series CO alarm uses a sensor operating with a microprocessor to measure Carbon Monoxide (CO) levels.  Using a “Time Weighted Average” (TWA) process, it monitors CO concentration, temperature and time to calculate levels of Carboxyhemoglobin (COHb).  COHb is the degree to which the oxygen carrying capacity of the blood is impeded by the union of carbon monoxide to the hemoglobin and as expressed as a percentage.  The human body absorbs CO easier than oxygen and COHb is the ratio absorbed carbon monoxide to oxygen in bloodstream. 

The CMD6-M alarm calculates the COHb as function of time and determines the appropriate alarm response.

*Long sensor life – approximately 7 year end-of-life (EOL)

Features:

• Interconnect up to ten (10) CO alarms - all connected CO alarms sound together 
• Microprocessor controlled
• Compact design for inconspicuous protection
• Time-weighted average CO measurement process constantly monitors all CO levels
• Highly resistant to most chemicals, solvents & cleaners
• CMD6-MD Internal battery model uses included maintenance-free lithium-metal batteries.  No wiring and reduced labor and material costs to install.  

Technical Specifications:

• Power Usage - None
• Alarm Point - 10% COHb
• Alarm Horn - 85 dBA
• Dimensions - .5" x 3.5" x 1.21" (8.9 x 8.9 x 3.1 cm)
• Interconnect Functionality - Yes

*Sold as an Individual 

DC Voltage Reducer 

For use when installing 12V DC devices where onboard power suppliers are 24 to 32 VDC.

May be used for any device requiring 12V DC with .50 Amps or less input.

*Sold as an Individual 

FG-250RV Smoke Detector - 9V Battery Powered

BRK Model FG-250RV is a single-station smoke alarm specifically designed for RV, residential and institutional applications including sleeping rooms in hospitals, hotels, motels, dormitories, and other multifamily dwellings.

Features:

• Dual Ionization sensing chamber – Generally more effective at detecting small particles produced by flaming fires, such as paper or kitchen grease
• 85 dB alarm horn at 10 feet
• 9V battery included
• Full function test switch 
• Silence feature to silence unwanted nuisance alarms 
• Red LED light that indicates DC power or alarm 
• Tamper-resistant locking pin that locks alarm cover to prevent removal of the battery 
• Approved for RV use but can be used in apartment, dor­mitory or hotel applications
• The compact, low-profile design complements any decor

Dimensions: 

• Diameter: (inch) 4.25″
• Height: (inch) 1.6″

Fixed Heat Detector with Base

The Fireboy-Xintex Heat Detector uses a single thermistor to sense the air temperature around the detector. This heat detector was designed to detect how fast the temperature is increasing.

Features:

• 163°F Fixed Heat Detector
• Housing: White flame-retardant polycarbonate
• Terminals: Nickel-plated stainless steel
• Ideal in environments that are dirty or smoky
• Unaffected by wind or atmospheric pressure
• Remote test feature

Specifications:

• Detection Principle: Measurement of heat using a thermistor
• Sampling Frequency: Once every four seconds
• Supply Voltage: 8.5 V dc to 33 V dc
• Supply Wiring: Two wire supply, polarity sensitive
• Power-up Time: < 20 seconds
• Minimum: ‘detector active’ voltage: 6 V
• Holding Voltage: 5 V - 33 V
• Minimum Holding Current: 8 mA 
• Minimum Voltage to Light Alarm LED: 5 V 
• Alarm Reset Voltage: < 1 V 
• Alarm Reset Time: One second 
• Alarm Indicator: Integral indicator with 360º visibility
• Operating & Storage Temperature: -40ºC to +70ºC

Operation:

• Open-web casing that enables air to flow freely across a thermistor which measures the air temperature every two seconds 
• A microprocessor stores the temperatures and compares them with pre-set values to determine whether a fixed upper limit - the alarm level - has been reached
• Detectors the microprocessor uses algorithms to determine how fast the temperature is increasing

Manual Discharge Cable Kit - 10'

Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation. 

Compatible With:

• MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems

Features:

•  Easily routed with engine cables and electrical wiring 
• Various lengths for vessel specific installation 

In the Box:

• Cable - 10'
• Mounting plate
• Pull handle
• Safety pin

*Sold as an Individual 

Manual Discharge Cable Kit - 36'

Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation. 

Compatible With:

• MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systems

Features:

•  Easily routed with engine cables and electrical wiring 
• Various lengths for vessel specific installation 

In the Box:

• Cable - 36'
• Mounting plate
• Pull handle
• Safety pin

*Sold as an Individual 

Optical Smoke Detector with Base

Optical smoke detectors have consistently been recognized as suitable detectors for general use. They are regarded as particularly suitable for smoldering fires and escape routes. This smoke detector is also designed to significantly reduce the incidence of false alarms through over-sensitivity to transient phenomena.

Features:

• Recommended for use as general-purpose smoke detectors for early warning of fires in most areas
• Works well in black as well as in white smoke
• Compensation for slow changes in sensitivity
• Extra confirmation of smoke before an alarm signal is given

Specifications:

• Sampling Frequency: Once every four seconds 
• Operating Voltage: 8.5 V dc to 33 V dc
•  Supply Wiring: Two wire supply, polarity sensitive
•  Power-up Time: < 20 seconds
•  Minimum ‘Detector Active’ Voltage: 6 V
• Minimum Holding Current: 8 mA
•  Minimum Voltage to Light Alarm LED: 5 V
•  Alarm Reset Time: One second
•  Alarm Indicator: Integral indicator with 360º visibility
•  Operating & Storage Temperature: -40ºC to +70ºC
• Humidity (no condensation or icing): 0% to 98% RH

Operation:

• Optical Smoke Detectors work on the well-established light scatter principle
• The remarkable optical design of this Smoke Detector enables it to respond to a wide spectrum of fires
• The sensing chamber contains an optical sensor that measures back-scattered light as well as the more usual forward-scattered light 
• The detector is calibrated so that it is highly reliable in detecting fires but is much less likely to generate false alarms
• The stability of the detector-high reliability, low false alarm rate is further increased by the use of algorithms to decide when the detector should change to the alarm state 
• Removes the likelihood of a detector producing an alarm as a result of smoke from smoking materials or another non-fire source

Propane Fume Detector, 2 Channel, 2 Sensors, Solenoid Valve & Control & 20' Cable - 24V DC 

Propane has become the fuel of choice for cooking and heating.

Highly BTU-efficient and readily available, propane is becoming more and more a part of power boating, sailing, and camping. The Xintex® line of propane products includes everything you need for outfitting a complete and safe propane system.

Propane is heavier than air and can settle below deck and in the bilge where it can be detonated by an engine start-up or electrical spark of any kind. Xintex® Propane Fume Detectors will alarm when fumes reach 18-20% LEL. 

*Includes Time Sensor Valve

• Visual indication of a fire or fault
  
• Audible indication of a fire or fault
  
• Waterproof display
  
• Includes 85dB horn
  
• Housing is 2 1/8" diameter, and may be installed inside wall or at helm station
  
• Supply Voltage: 10-30 VDC (auto sensing)
  
• Voltage and EMI protected
  
• Reverse polarity protected

• MB-1-R
  
• S-2A

Conversion Plate - CMD-4 to CMD-5 - Black

Optional conversion plate for mounting CMD-4 or CMD-5 Carbon Monoxide Alarms in places where larger CMD-3M or CMD-2M units were previously installed. This cover plate covers up unsightly wear or openings from previous installations.

Four mounting screws are included.

Conversion Plate - CMD-4 to CMD-5 - White

Optional conversion plate for mounting CMD-4 or CMD-5 Carbon Monoxide Alarms in places where larger CMD-3M or CMD-2M units were previously installed. This cover plate covers up unsightly wear or openings from previous installations.

Four mounting screws are included.

• Compact Design
  
• 2-3/16" Round Black Bezel
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  
• Reverse Polarity Protected

• Compact Design
  
• 2-5/8" Square Black Bezel
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  
• Reverse Polarity Protected

Engine Shut Down System

Features:

• 3 - 10 Amp Circuits
• 12/24 VDC
• Engine Shut Down System
• Round Display

• 2-3/16" Round Black Display with LEDs & Silence/Test Button
  
• 68 dBA Alarm will sound & Red LED will light at 20% of the LEL
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to
  85°C)
  
• Reverse Polarity Protected
  
• Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

• 2-3/16" Round Chrome Display with LEDs & Silence/Test Button
  
• 68 dBA Alarm will sound & Red LED will light at 20% of the LEL
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to
  85°C)
  
• Reverse Polarity Protected
  
• Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

• 2-3/16" Round Black Display with LEDs & Silence/Test Button
  
• Automatic Ventilation Blower Control
  
• 68 dBA Alarm will sound & Red LED will light at 20% of the LEL
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to
  85°C)
  
• Reverse Polarity Protected
  
• Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

• 2-3/16" Round Black Display with LEDs & Silence/Test Button
  
• Automatic Ventilation Blower Control
  
• 68 dBA Alarm will sound & Red LED will light at 20% of the LEL
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to
  85°C)
  
• Reverse Polarity Protected
  
• Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

• 2-3/16" Round Chrome Display with LEDs & Silence/Test Button
  
• Automatic Ventilation Blower Control
  
• 68 dBA Alarm will sound & Red LED will light at 20% of the LEL
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to
  85°C)
  
• Reverse Polarity Protected
  
• Current Draw @ 12VDC: Nominal:55mA / Maximum:95mA

• 4.05" x 2.1" x 1.08"
• 103mm x 54mm x 28mm

• Replacement Aluminum Sensor f/Xintex G-1, G-2, P-1, P-2 Gasoline and Propane Detection Systems
  
• Simple Plug-In Installation
  
• 9-30VDC
  
• Operating Temperature:-40°F to 185°F (-40°C to 85°C)
  
• Reverse Polarity Protected

• Replacement Plastic Sensor f/Xintex G-1, G-2, P-1, P-2 Gasoline and Propane Detection Systems
  
• Simple Plug-In Installation
  
• 9-30VDC
  
• Operating Temperature:-40°F to 185°F (-40°C to 85°C)
  
• Reverse Polarity Protected

• Compact Design
  
• 2-3/16" Round Black Bezel
  
• Solenoid Valve
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  
• Reverse Polarity
  
• Current Draw @ 12 VDC: Nominal:20mA / Maximum:650mA

• Compact Design
  
• 2-3/16" Round Chrome Bezel
  
• Solenoid Valve
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  
• Reverse Polarity
  
• Current Draw @ 12 VDC: Nominal:20mA / Maximum:650mA

• 2-5/8" Square Black Display with LEDs & Silence/Test Button
  
• Solenoid Valve & Adapter
  
• Solenoid Valve Control Button
  
• Automatically Closes Solenoid Valve
  
• 68 dBA Alarm will sound & Red LED will light at 20% of the LEL
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to
  85°C)
  
• Reverse Polarity Protected
  
• Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA

• 2-5/8" Square Black Display with LEDs & Silence/Test Button
  
• 68 dBA Alarm will sound & Red LED will light at 20% of the LEL
  
• Simple Installation
  
• 9-30VDC
  
• Operating Temperature: -40°F to 185°F (-40°C to
  85°C)
  
• Reverse Polarity Protected
  
• Current Draw @ 12VDC: Nominal:55mA / Maximum:780mA
  
• For use with existing solenoid valve & adapter