Shop by Brand: Octopus Autopilot Drives

38mm Bore Cylinder Seal Kit

Octopus autopilot drives 38mm bore cylinder seal kit. Octopus offers a selection of autopilot drive systems that are engineered to deliver unparalleled performance and years of reliable service on a wide range of vessels. Whatever your auto steering needs, from fishing boats and sailboats to yachts of all sizes and commercial vessels, Octopus has the right drive for you.

Features:

• 38mm bore cylinder seal kit
• For 38mm cylinder
• 38mm cylinder repair kit

Autopilot Pump Type 1 Adjustable Reversing 12V Up To 18 CI Cylinder

TWICE THE POWER

The unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.

HALF THE POWER CONSUMPTION

Gear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.

PINPOINT ACCURACY

Leading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.

SAVE ON INSTALLATION COSTS

A professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.

ADJUSTABLE FLOW RATE

A pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.

Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system.

Getting the best steering performance for the boat. The flow rate of the pump can be set to get the best hard over time (cylinder ram speed) for the particular boat. 

Features:

• Reliable - Piston pump technology with only three moving parts
• Twice the Power - Delivers over twice the hydraulic output per watt of input
• Half the Power Consumption - Accurate ram positioning means fewer course corrections
• Adjustable Flow Rate - Configure performance to suit your vessel
• Easy Servicing - Shut off valves allow removal without draining steering system

Autopilot Pump Type 2 - Adjustable Reversing Pump - 12V up to 22 CI Cylinder

Now with ORB Port Connection manifold

Reversing pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make a steering correction to left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversing direction is accomplished by reversing the motor input current.

The pump has only three moving parts and requires no complicated check valves to prevent rudder movement when de-energized. Output flow is completely adjustable to 50% of rated flow allowing the pump output to be adjusted precisely to the volume of steering cylinder fitted. The pump is exceptionally reliable and delivers more than twice the hydraulic output per watt of input than gear pumps manufactured by competitors.

Motors are heavy duty, a full 85mm in diameter with long brushes and sealed ball bearings for long service life. The molded rubber mounting foot can be rotated to allow the pump to be mounted on any surface.

A useful range of accessories can be used to enhance the pump by incorporating added valves and solid state FET switching. The valves mount directly to the pump body. The FET switch mounts adjacent to the pump. No other autopilot pump made offers such advantages.

Benefits of the Octopus Reversing Pumps
Piston pump technology giving higher efficiency and accuracy Fewer moving parts giving increased reliability Variable flow rate to make sure the pump is matched as accurately as possible to the manual steering system Professional cut off valves for simple servicing.

Features:

• Average Current 4-6 amps
• Max Current 19amps
• 12vDC
• Cylinder Size: 11-22ci
• Flow Rate(adjustable): 600cc - 1.2 litre/min

Autopilot Pump Type 3 Adjustable Reversing 12V Up to 30CI Cylinder

Features:

• RELIABLE - Piston pump technology with only three moving parts
• TWIC THE POWER - Delivers over twice the hydraulic output per watt of input
• HALF THE POWER CONSUMPTION - Accurate ram positioning means fewer course corrections
• ADJUSTABLE FLOW RATE - Configure performance to suit your vessel
• EASY SERVICING - Shut off valves allow removal without draining steering system

TWICE THE POWER

The unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.

HALF THE POWER CONSUMPTION

Gear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.

PINPOINT ACCURACY

Leading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.

SAVE ON INSTALLATION COSTS

A professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.

ADJUSTABLE FLOW RATE

A pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.

Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system.

Hydraulic Gear Pump - 24V - 20-30CI Cylinder - 2000cc/min

Gear Pump Offers Industry Leading Reliability and Performance in a Smaller, Lighter, Quieter Package.

Features:

• High Efficiency – Industry leading efficiency minimizes power consumption
• Low Noise – New industry design offers significantly quieter operation
• Light Weight & Compact – Small footprint offers greater installation flexibility
• Wide Range Of Products – From 600 to 1600cc/min, 12v and 24v options

Professional Solutions for Hydraulically Steered Boats:

• Industry Leading Efficiency – lower power consumption, particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.
• Cost Savings – the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.
• The smaller footprint of the compact gear pump increases installation flexibility.
• Lower noise and vibration make the gear pump particularly suitable for sailboat installations.
• Suitable for balanced or unbalanced cylinders.
• All models available for both 12v and 24v systems.

Hydraulic Steering Fluid - Quart

Features:

• Applications: All Hydraulic Steering Systems
• Type: ISO 15 Low Temp Mineral Hydraulic Fluid
• Select Container Size: Quart

Orb Brass 90° Elbow

Features:

• Brass
• 90° Elbow

Orb Brass Straight Connector - ORB 5 to 3/8" Compression 

Features:

• Brass
• Orb Straight Connector

Orb Brass Tee Fitting

Features:

• Brass
• Orb Tee Fitting

Seal Kit for Reversing Pump

Reversing pump seal kit

• Stern drives also known as I/O drives or Z drives
  
• Outboard engines up to 150HP
  
• Inboard engines requiring traditional rudder steering

• Low Cost Solution - No need to change to hydraulic steering
  
• Easy to Fit - Simple to install kits
  
• Discreet Installation - All components mounted out of sight
  
• Time Saving - Rudder feedback option mounts directly on drive
  
• Safe - Manual override without disengaging the autopilot
  
• Compatible with all major autopilot brand electronics - simple solutions for difficult installations

• Retro Fits to Most Cable Steered Vessel
  
• Easily Adaptable to S1 Autopilots
  
• The Only Viable Option When Adding an Autopilot to a Cable Steered Vessel
  
• Affordable, Reliable, Seamless-behind the Dash Installation
  
• 2 Year Limited Warranty