Shop by Brand: SmartPlug

30 Amp 25' Dual Configuration Cordset w/Soft Carry Case

The SmartPlug 30 Amp Dual Configuration Cordset connects to the SmartPlug 30 Amp Boatside Inlet (BM30S) on the boatside and a typical 30 Amp twist-type outlet on the dockside. It is also the only shore power cord on the market which uses tinned copper wire throughout the entire length of the cable for the ultimate in corrosion resistance.

Features

• No adapters needed!
• SmartPlug connector on boatside end with twist-type plug on dockside
• Tinned copper wire throughout entire cordset for the ultimate in corrosion resistance.
• Power-on indicator light on boatside connector end
• Straight electrical contacts with 20x more contact area
• Weatherproof face seal on boatside connector end
• Multi-point locking system

Includes

• Dual Configuration Cordset
• User Manual

30 Amp 50' Dual Configuration Cordset w/Soft Carry Case 

The SmartPlug 30 Amp Dual Configuration Cordset connects to the SmartPlug 30 Amp Boatside Inlet (BM30S) on the boatside and a typical 30 Amp twist-type outlet on the dockside. It is also the only shore power cord on the market which uses tinned copper wire throughout the entire length of the cable for the ultimate in corrosion resistance.

Features

• No adapters needed!
• SmartPlug connector on boatside end with twist-type plug on dockside
• Tinned copper wire throughout entire cordset for the ultimate in corrosion resistance.
• Power-on indicator light on boatside connector end
• Straight electrical contacts with 20x more contact area
• Weatherproof face seal on boatside connector end
• Multi-point locking system

Includes

• Dual Configuration Cordset
• User Manual
• Soft Carry Case

30 Amp 50' Dual Configuration Cordset w/Tinned Wire & 30 Amp Stainless Steel Inlet

The 30A 125V/250V cordset comes with a cool blue LED Power indicator light that glows when power is on. The 30A 125V/250V Marine cordset provides a super flexible cord that can be tightly coiled even in cold weather. The cordset is available in 25’ & 50’ lengths with the SmartPlug connector for the boat side and the industry standard twist-type connector for the marina power pedestal. SmartPlug marine cords have tinned wire to minimize corrosion.

Features:

• Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord
  • Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
  • Blue LED Power Indicator Light
  • Cordset Bag – Storage bag is included with cordset

30 Amp Boat & RV Side Connector

The SmartPlug 30 Amp Boatside Connector (BF30) is easily retrofitted onto the boatside end of your existing shore power cord. Simply cut off the old connector and replace it with the superior SmartPlug connector using the included instructions. Works with SmartPlug 30 Amp Boatside Inlet (BM30S).

Features:

• Pushes straight in, no twisting required
• Straight electrical blades with 20x more contact area
• Weatherproof seals
• Multi-point locking system
• 316 stainless steel side levers

Includes:

• 30 Amp Connector
• Installation tool
• Flanged cord seal
• Weatherproof Face seal

30 Amp Dual Configuration 50' Cordset w/Tinned Wire &Twist-Type Connector & 30 Amp Non-Metallic White Inlet

The 30A 125V/250V cordset comes with a cool blue LED Power indicator light that glows when power is on. The 30A 125V/250V Marine cordset provides a super flexible cord that can be tightly coiled even in cold weather. The cordset is available in 25’ & 50’ lengths with the SmartPlug connector for the boat side and the industry standard twist-type connector for the marina power pedestal. SmartPlug marine cords have tinned wire to minimize corrosion.

Features:

• Multi-Point Locking System – Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the plug body eliminate any water penetration when plug is connected to inlet
• Blue LED Power Indicator Light
• Cordset Bag – Storage bag is included with cordset

30 AMP Dual SmartPlug Cordset - 25'

For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.  Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. 

The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boat Side and a SmartPlug connector for the power pedestal.

Features:

• Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
• LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
• Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.

Technical Specifications:

• Length - 25'
• Color - Orange
• Boatside Connection - 30 AMP/125 V SmartPlug
• Dockside Connection - 30 AMP/125 V SmartPlug

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30 AMP Dual SmartPlug Cordset - 50'

For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.  Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. 

The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boat Side and a SmartPlug connector for the power pedestal.

Features:

• Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
• LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
• Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.

Technical Specifications:

• Length - 50'
• Color - Orange
• Boatside Connection - 30 AMP/125 V SmartPlug
• Dockside Connection - 30 AMP/125 V SmartPlug

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30 AMP Inlet and Female Cord Connector Combo - Grey 

The SmartPlug Combo Kit includes both a 30 AMP 125V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord.  This package offers superior performance and ease of use. 

Features:

• Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand.
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
• Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord.
• Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration.
• Quick and Easy Installation.

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30 Amp Non Metallic Black Inlet - Boat & RV Side

SmartPlug’s 30A 125V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Gray or Black), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
• Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

30 Amp Non Metallic White Inlet - Boat & RV Side

SmartPlug’s 30A 125V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Gray or Black), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
  • Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
  • Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
  • Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
  • Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

30 AMP Single Receptacle Eaton Lighthouse Conversion Kit

SmartPlug Receptacles are designed to provide the maximum surface contact to efficiently transfer power while minimizing resistance which causes heat.  These receptacles are used to upgrade existing marina pedestals.  They can also be installed in industry-standard electrical boxes when used in conjunction with our spring-loaded weather doors. 

SmartPlug plugs self-align with these receptacles and has an automatic lock system when engaged.  The push-in design provides self-cleaning for the pins and clips which insures clean power transfer.

Features:

• Mechanical Locking System – Each receptacle incorporates a spring-loaded lock for a secure connection.
• Weather Resistant Seal - Silicone gaskets installed in the inlet cover and the plug body eliminate moisture penetration.
• Ease of Use – Locks into the edge of the SmartPlug mounting flange.
• No Twist Required
• Asymmetrical Body Shape – It only goes in the right way every time.
• Easy to Install

In the Box:

• 30 AMP SmartPlug Receptacle 
• Main Eaton Mounting Bracket
• 30 AMP SmartPlug Adapter Plate 
• Legacy Adapter Plate
• Mounting hardware
• Instruction manual

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30 AMP SmartPlug/Twist Type Cordset - 25'

For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.   Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. 

The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boatside and a Twist Type Plug connector for the Dockside.

Features:

• Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
• LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
• Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.

Technical Specifications:

• Length - 25'
• Color - White
• Boatside Connection - 30 AMP/125 V SmartPlug
• Dockside Connection - 30 AMP/125 V Twist Type Plug

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30 AMP SmartPlug/Twist Type Cordset - 50'

For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.   Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. 

The 30 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boatside and a Twist Type Plug connector for the Dockside.

Features:

• Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
• LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
• Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.

Technical Specifications:

• Length - 50'
• Color - White
• Boatside Connection - 30 AMP/125 V SmartPlug
• Dockside Connection - 30 AMP/125 V Twist Type Plug

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50 AMP 125/250 V Female Receptacle 

SmartPlug Receptacles are designed to provide the maximum surface contact to efficiently transfer power while minimizing resistance which causes heat.  These receptacles are used to upgrade existing marina pedestals.  They can also be installed in industry standard electrical boxes when used in conjunction with our spring-loaded weather doors. 

SmartPlug plugs self-align with these receptacles and have an automatic lock system when engaged.  The push in design provides self cleaning for the pins and clips which insures clean power transfer.

Features:

• Mechanical Locking System – Each receptacle incorporates a spring-loaded lock for a secure connection.
• Weather Resistant Seal - Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration.
• Ease of Use – Locks into the edge of the SmartPlug mounting flange.
• NoTwist Required
• Asymmetrical Body Shape – It only goes in the right way every time.
• Easy to Install 

*Sold as an Individual 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50 Amp 25' Dual Configuration Cordset w/Tinned Wire & Marina Park Power End

The 50 Amp 125V/250V cordset provides a weatherproof power solution. The cordset includes the safe and easy to use SmartPlug connector for the Boat Side and a Marina twist-type connector for the power pedestal. 

Features:

• Multi-Point Locking System - Side clips lock the plug body securely into the inlet which eliminates any stress on the electrical connection from movement of the power cord
• Weatherproof Seals - Multi-fin silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet
• Blue LED Power Indicator Light– Dual LED bulbs
• Tinned Wire– All SmartPlug marine cords have tinned wire to minimize corrosion

50 Amp Boat & RV Connector

The 50A 125V/250V connector has been designed to be used with 3-wires (125V) or 4-wires (250V) in a single connector.  Our retro-fit connector offers superior performance and ease of use. The SmartPlug connector is designed to use your current cordset. You simply cut off the cord plug on your RV/Boat 50A cord.  The connector has mechanical cord restraint, color coded wire guides, a water resistant cord seal and spring loaded side levers that automatically lock into the slots on the inlet housing.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weatherproof Seals – Multi-fin silicone gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration

50 Amp Boat & RV Inlet - Stainless Steel

SmartPlug’s 50A 125V/250V inlets have been designed to be used with 3-wires (125V) or 4-wires (250V) in a single inlet. The inlet connector provides 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Black or Gray), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
• Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

50 Amp Boat & RV Side Inlet & Connector

The SmartPlug 50 amp retrofit kit includes the 50 amp stainless inlet (BM50S) and 50A connector (BF50), everything you need to protect your boat from shore power overheating. Installation of both components is easy. The kit is designed to fit on 125V/250V systems with multiple seals on the connector to ensure a watertight fit on an existing cordset.

Features

• Can be used with 125V or 250V service
• Can be plugged in easily in the dark or awkward locations effortlessly
• 20x more electrical contact means no overheating
• Weatherproof seals to eliminate corrosion
• Triple locks are stronger and easier to use
• Lid locks in closed position
• Sleeved designs ensures a stable electrical connection every time

50 AMP Dual Configuration Cordset - 50'

For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.  Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. 

The 50 AMP 125/250 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boat Side and a Twist Type Dockside connector.

Features:

• Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
• LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
• Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.

Technical Specifications:

• Length - 50'
• Color - Orange
• Boatside Connection - 50 AMP/125/250 V SmartPlug
• Dockside Connection - 50 AMP/125/250 V Twist Type Plug

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50 AMP Dual SmartPlug Cordset - 25'

For many years boaters have experienced the safety, security and simplicity of SmartPlug products on the boatside while still dealing with the same old issues created by legacy twist-type products on the dockside.  Those days are changing with the introduction of SmartPlug's new dockside product offering.  SmartPlug has applied decades of experience and customer feedback to create a product that allows you to upgrade your shore power connection with SmartPlug technology. 

The 50 AMP 125 V cordset provides a complete weatherproof power solution. The cordset includes the SmartPlug connector for the Boat Side and a SmartPlug connector for the power pedestal.

Features:

• Multi-Point Locking System - Side clips lock the body securely into the inlet, which eliminates any stress on the electrical connection from movement of the power cord.
• Weatherproof Seals - Silicone gaskets installed in the interior of the plug body eliminate any water penetration when plug is connected to inlet.
• LED Power Indicator Light – On the top of all SmartPlug female ends, two LED indicator lights.  One Red and one Blue LED light for Safe/Unsafe Electrical Power Indication under Reverse Polarity Conditions.
• Tinned Wire – All SmartPlug marine cords have tinned wire to minimize corrosion.

Technical Specifications:

• Length - 25'
• Color - Orange
• Boatside Connection - 50 AMP/125 V SmartPlug
• Dockside Connection - 50 AMP/125 V SmartPlug

*Sold as an Individual 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50 AMP Inlet and Female Cord Connector Combo - Black 

The SmartPlug Combo Kit includes both a 50 AMP 125/250 V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord.  This package offers superior performance and ease of use. 

Features:

• Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand.
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
• Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord.
• Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration.
• Quick and Easy Installation.

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50 AMP Inlet and Female Cord Connector Combo - White 

The SmartPlug Combo Kit includes both a 50 AMP 125/250 V Male inlet connector and Female Cord End Connector. The Female Cord End Connector is designed to be used with your existing cord.  This package offers superior performance and ease of use. 

Features:

• Eliminates Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand.
• Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark.
• Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord.
• Weather Resistant Seals – Silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration.
• Quick and Easy Installation.

*Sold as an Individual

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

50 Amp Non Metallic Black Inlet - Boat & RV Side

SmartPlug’s 50A 125V/250V inlets have been designed to be used with 3-wires (125V) or 4-wires (250V) in a single inlet. The inlet connector provides 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Black or Gray), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
• Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

50 Amp Non Metallic Gray Inlet & Plug Combo - Boat & RV

The SmartPlug Combo Kit includes both a 50A 125V/250V inlet connector and a retro-fit connector. This Kit has been designed so it can be used with 3-wires (125V) or 4-wires (250V).  The retro-fit connector is designed to use your current cordset. You simply cut off the cord plug on your RV/Boat cord.  The connector has mechanical cord restraint, color coded wire guides and a water resistant cordseal. The inlets are available in stainless steel and three non-metallic colors, (White, Black or Gray), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
  • Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
  • Multi-Point Locking System – Side clips and inlet cover lock the plug body securely into the inlet which eliminates any stress on the electrical components by movement of the power cord
  • Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
  • Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

50 Amp Non Metallic Gray Inlet - Boat & RV Side

SmartPlug’s 50A 125V/250V inlets have been designed to be used with 3-wires (125V) or 4-wires (250V) in a single inlet. The inlet connector provides 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to replace the old twist-type inlet products in minutes. The inlets are available in stainless steel and three non-metallic colors, (White, Black or Gray), of high performance/flame resistant material.

Features:

• Eliminates Overheating – Increased pin & clip surface area greatly improves electrical conductivity during high amperage demand
• Ease of Use – No twisting required, the unique plug body shape and push-in design means it only goes in the right way every time – even in the dark!
• Multi-Point Locking System – Side clips automatically lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord
• Weather Resistant Seals – Multi-fin silicone gaskets installed in the inlet cover and the plug body eliminates moisture penetration
• Quick & Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes

BF30 Repair Kit/Female Connector - Gasket Kit

Features:

• 30A Cordseal
• Stainless Mounting Gasket
• Instructions

BF30 Repair Kit/Female Connector - Service Kit

Features:

• Plug Body Front/Clamp Arms
• Face Gasket/End of Plug
• 30A Installation Tool
• 30A Cord Seal
• Instructions

BF32/BF50 Cord Seal Kit - 32A/50A Connector to 30A Cord Adapter

Features:

• 32A Cordseal
• Lid Gasket
• Internal Plug Screws
• Dish Soap

BF50 Repair Kit/Female Connector - Gasket Kit

Features:

• 50A Cordseal
• Stainless Mounting Gasket
• Instructions

BF50 Repair Kit/Female Connector - Service Kit

Features:

• Plug Body Front/Clamp Arms
• Face Gasket/End of Plug
• 50A Installation Tool
• 50A Cord Seal
• Instructions

BM30NT Repair Kit Inlet/Male Connector - Service Kit

Features:

• Inlet Sub - Assembly
• Stainless Mounting Gasket
• Non-Metallic Mounting Gasket
• Inlet Base and Lid Gasket
• Instructions