Large 8" Conical Filter with a 5-1/2" flange opening provides 63% greater airflow over Stock intake system. This washable/reusable 5-layer progressively finer mesh cotton gauze oiled media air filter provides maximum airflow for increased horsepower and torque. All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
|
DIFF COVER
|
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
|
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry.
|
Pro Guard D2 fluid filters are built stronger and filter better for todays demanding diesel engines. Our PGD2 oil filters use our exclusive NF21 two-layer, wire-backed synthetic filtration media that achieves higher efficiency than other synthetic blends or high-performance papers without the damaging flow restriction of traditional paper medias.
|
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry.
|
The aFe Stage 2 cold air intake produces up to 18HP and up to 24 lbs. x ft. torque while outflowing the factory intake by up to 117%. This intake is a highly engineered heat-shielded air box with a one-piece intake tube. Handling filter duties is the PRO DRY S performance air filter that features 3-layers of progressively finer mesh synthetic "oil-free" media. The PRO DRY S filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. The heat-insulating, molded plastic intake tube is engineered for improved volumetric efficiency and maximum performance while lowering Intake Air Temps (I.A.T). Utilizing factory mounting points, this system provides a hassle free installation. This coupling is designed to meet modern elevated engine compartment temperatures with a 4-ply silicone reinforced configuration. A one-piece powder-coated heat-shield is used to keep the air intake charge cool and dense. A cone 360 degree round air filter is used for maximum filtration (99.2% efficient) and convenience (requires no oils to clean). The PRO DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane for long life and multiple cleaning cycles. aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations. This intake is 50-state legal (CARB E.O Number D-550-4).
Fits 03-07 Dodge Ram 2500/3500 w/ 5.9L Diesel
Filter Housing Type: Open
Filter Type: Dry
Inlet Tube: Included
Filter Housing Material: Steel
Filter Housing Finish: Black
Intake Tube Material: ABS Plastic
Replacement Filter Part Number:AFE21-90028
State Legal:50 State CARB E.O. # D-550-4
Air Inlet Type: Fresh
|
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
|
AIR INTAKE SYS
|
Using a serrated/helix design, this spacer creates turbulence in the air flow at the point just prior entry into the engine optimizing the combustion cycle. This turbulence helps the air/fuel charge burn completely providing increased horsepower, torque and improved throttle response. This spacer works with the OE and aFe Power cold air intake systems. The Serrated/Helix combination design creates intake turbulence in the combustion chamber. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other Helix only designs. All Silver Bullet Throttle Body Spacers are precision machined from T-6061 billet aluminum for light weight, high strength and perfect fit and finish. Silver Bullet Throttle Body spacer lengthens the intake track which helps increase intake air speed increasing performance and improved throttle response Base Material: T-6061 T6 Aluminum
Finish: Polished Aluminum Finish
50 State Legal CARB E.O. # D-550-5
Finish:Anodized
|
TWISTED STEEL HEADER
|
COLD AIR INTAKE SYSTEM
|
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
|
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
|
Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread design top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market. The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coldest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. Premium stainless steel T-bolt clamps and a 2-ply reinforced silicone coupler at the throttle body is used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. After a rigorous design and testing phase, the results are in. The Momentum GT intake system outflowed the factory intake by 46% and produced 11 additional horsepower and 12 lbs. x ft. torque. Note: This system is not legal for street use and cannot be installed in a California registered vehicle.
|
Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread design top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market. The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coldest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. Premium stainless steel T-bolt clamps and a 2-ply reinforced silicone coupler at the throttle body is used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. After a rigorous design and testing phase, the results are in. The Momentum GT intake system outflowed the factory intake by 46% and produced 11 additional horsepower and 12 lbs. x ft. torque. Note: This system is not legal for street use and cannot be installed in a California registered vehicle.
|
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry.
|
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry.
|
Jeep Wrangler (JK) 07-11 V6-3.8L w/ Mechanical Fan "Middle-East Equipment Group Edition"Emissions - This item is 50-State legalC.A.R.B. E.O. # - D-550-27
|
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry.
|
aFe Power is proud to introduce the all new "Glide Guard" On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (SOLD SEPARATELY) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16" thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install. Notes:This Glide Guard Mount requires the installation of an aFe Hi-Tuck "RB" (Rock Basher) exhaust system (P/N: 49-08040/41 or 49-46231/32). It does NOT fit with the factory exhaust system. These systems relocate the muffler to a forward position, where it is less vulnerable to off road damage and add additional power & performance to your Jeep.While the Glide Guard is designed to fit with most aftermarket suspensions, some aftermarket rear suspension systems (ie; coil-over conversion) and /or sway bar setups may interfere with fitment.
|
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing to the massive PRO Dry S air filter and premium hardware, we spared no expense to give you the best intake on the market.
|
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry.
|
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry.
|
This air intake system produces 5 max horsepower, 12lbs. x ft. torque and out-flowed the factory intake by 81%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This intake is 50-state legal (CARB E.O Number D-550-4)
Fits 07-12 Dodge Ram 2500/3500 w/ 6.7L Diesel
Filter Housing Type: Partial Enclosure
Filter Type: Dry
Inlet Tube: Included
Filter Housing Material: Steel
Filter Housing Finish: Black
Intake Tube Material: ABS Plastic
Replacement Filter Part Number:AFE21-90049
State Legal:50 State CARB E.O. # D-550-4
Air Inlet Type: Fresh
|
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.
|
This aFe Stage 2 cold air intake produces 14hp and 23lbs. x ft. of torque and outflows the factory intake by 35%. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a heat-insulating black powdercoated aluminum tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This system mounts to the factory lower intake housing. Fits 09-10 Ford F-150 w/ 5.4L
Filter Housing Type: Open
Filter Type: Oil
Inlet Tube: Included
Filter Housing Material: Steel
Filter Housing Finish: Black
Intake Tube Material: ABS Plastic
Replacement Filter Part Number:AFE24-91040
Air Inlet Type: Fresh
|
This aFe Stage 2 cold air intake produces 14hp and 23lbs. x ft. of torque and outflows the factory intake by 35%. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a heat-insulating black powder-coated aluminum tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This system mounts to the factory lower intake housing.
Fits 09-11 Ford F-150/Expedition and Lincoln Navigator w/ 5.4L
Filter Housing Type: Open
Filter Type: Dry
Inlet Tube: Included
Filter Housing Material: Steel
Filter Housing Finish: Black
Intake Tube Material: ABS Plastic
Replacement Filter Part Number:AFE21-90053
Air Inlet Type: Fresh
|
Features: CAD-Designed Roto-Molded Intake Tube. One-Piece Sealed Housing with Auxiliary Air Scoop. Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly. Unique (Patent Pending) Housing-to-Filter Interface for Easy Installation. Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 9" round 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a urethane hump coupler are used for strength and durability while also providing the most secure installation available. Momentum HD intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
|
Momentum GT Sealed Stage 2 Si PRO DRY S Intake System Unique One-Piece Housing;Roto-mold Tube;5" Tall 360 Degree Inverted Top Air Filter;Premium Hardware;50 State Legal CARB EO# D-550-13 CADILLAC CHEVROLET GMC AVALANCHE ESCALADE ESCALADE ESV ESCALADE EXT SIERRA 1500 SIERRA 2500 HD SIERRA 3500 HD SILVERADO 1500 SILVERADO 2500 HD SILVERADO 3500 HD SUBURBAN 1500 SUBURBAN 2500 TAHOE YUKON YUKON XL 1500 YUKON XL 2500 BASE BLACK DIAMOND LS BLACK DIAMOND LT BLACK DIAMOND LTZ DENALI DENALI HYBRID HYBRID LS LT LTZ LUXURY PLATINUM PPV PREMIUM SL SLE SLT SSV WT XFE 2009 2010 2011 2012 2013 4.8L GEN IV Flex L20 Vortec (294) 4.8L GEN IV LY2 Vortec (294) 5.3L GEN IV Flex LC9 Vortec (325) 5.3L GEN IV Flex LMG Vortec (325) 5.3L GEN IV LH6 Vortec (325) 5.3L GEN IV LY5 Vortec (325) 6.2L Flex L94 (376) 6.2L Flex L9H (376) 6L GEN III Electric/Flex LZ1 Vortec(364) 6L GEN III Electric/Gas LFA Vortec (364) 6L GEN IV Flex L96 Vortec (364) 6L GEN IV L76 Vortec (364) 6L GEN IV L96 Vortec (364) 6L GEN IV LY6 Vortec (364) ELECTRIC/FLEX
|
Bringing you the next generation of intakes, the Momentum GT sealed air intake system for the 2009-2013 Silverado/Sierra with V8 engines. The Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. From the one-piece sealed housing with a built-in sight window, to the massive air filter, roto-molded tube and premium hardware. This system is superior in every way.
|
INTAKE SYSTEM
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |