MAGNUM GRIP GATED SHIFTER
|
Introducing B&M's new extended transfer case shift handle for 2018 Jeep Wrangler JL models. The extended handle allows for easy reach and operation. Allows shifting in/out of gear ranges without having to reach down. The extended length also provides additional leverage which reduces the effort required to shift. The handle is manufactured from machined billet aluminum with black anodizing and red accent details. It includes a black shift knob and offers a very easy direct fit-installation.
|
6-ft. Automatic Performance Shifter Cables Properly clearanced to reduce backlash .250outer diameter ‘long lay' outer jacket These cables are supplied with most B&M shifters (except race shifters) APPLICATION: Cables for B&M shifters built before 1981: (With threads on both ends).
|
When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission's kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.
|
These B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes. Adds 3 quarts to the Transmission.
|
B&M automatic shifter accessories help you complete your project with parts designed and selected by the experts at B&M. This bracket and lever kit includes a cable bracket, lever, and associated hardware. For use with select applications, including GM TH400, 350, 250, 2004R, and 700-R4 transmissions.
|
Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan!
|
B&M launch controls can be used to control either your front or rear brakes. They're intended primarily as brake-locking devices for drag racing, but they also can be used on the street as hill-holders(up to 60 seconds).
|
B&M Cast Aluminum Transmission Pans are constructed of thick A356.0-T6 cast aluminum. Designed to fit a wide range of cars and trucks with TH700-R4, 4L60, 4L60E & 4L65E transmissions, these deep pans significantly increase the fluid capacity and dissipate heat much faster to prolong the life of the transmission and related components. Additional features include an engraved B&M logo, drain port, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.
|
Most transmission and converter failures can be traced directly to excessive heat. B&M temperature Gauge comes with a light kit, color coded dial face, all wires and terminals, a special sending unit and T-fitting for easy installation.
|
Replacement 5' Shifter Cable for most B&M Shifters. Eyelet end at shifter, 10-32 thread end at transmission. Standard cable supplied with most B&M Shifters.
|
Features include NHRA/ IHRA reverse lockout, backup light switch, neutral safety switch, polished T-handle. Cable operated for quick installation and accurate shifting. For 2 and 3 speed applications.
|
Unimatic 5-ft Blue Jacket cable Pre-lubed for smooth operation Proper clearance to reduce backlash .25 in. outer diameter blue long lay outer jacket Two lengths available, 5 foot cable is standard for most applications. (Unimatic shifters only).
|
B&M's superior grade of hard core super duty race cables have up to 50% less backlash than competitive cables. 6ft. overall length. Will Work with all B&M Race Shifters.
|
This B&M Bracket and Lever Kit allows any B&M Shifter to be used on a vehicle equipped with a Ford 4R70W Automatic transmission. Both Selector Shaft and Selector Lever are made of T6 Aluminum. Due to the countless uses and exposure to the elements, both parts are Hard Anodized to prevent wear and corrosion.
|
B&M Cast Aluminum Differential Covers are designed to strengthen the differential by preventing case distortion and ring gear & bearing cap deflection. Constructed of A356.0-T6 aluminum, these rugged covers significantly increase the fluid capacity and dissipate heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. Additional features include an engraved B&M logo, drain and fill port locations, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.
|
B&M Cast Aluminum Differential Covers are designed to strengthen the differential by preventing case distortion and ring gear & bearing cap deflection. Constructed of A356.0-T6 aluminum, these rugged covers significantly increase the fluid capacity and dissipate heat much faster than the stock factory unit to prolong the life of your ring and pinion gears. Additional features include an engraved B&M logo, drain and fill port locations, a magnetic drain plug for catching ferrous metal particles, and complete hardware and installation instructions.
|
B&M Hi-Tek Differential Covers for the Ford Super 8.8 inch are constructed of A356-T6 aluminum and feature large vertical fins to strengthen and aid in cooling over the factory stock units. A larger pan depth also increases fluid capacity by 1.13 quarts which helps dissipate heat faster and aids in prolonging the life of your bearings, gear oil, ring & pinion gears and more. Additional features include load bolts providing additional support to eliminate bearing cap deflection, an engraved B&M logo, and complete hardware and installation instructions.
|
When you change your transmission, pour in performance with Trick Shift Transmission fluid. Trick Shift is a blend of foam inhibitors, extreme pressure agents and shift modifiers which in combination provide extended transmission life and dramatically improve shift feel. 12 quarts are required to fill transmission and torque converter when completely empty.
1 quart
12 quarts are required to fill transmission and torque converter when completely empty
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |