This Custom shrouded s-blade electric fan will fit 1987-06 Wranglers with 4 or 6 cylinder. With it's solid brackets it mounts directly to the O.E. radiator-mounting points.
The X-TREME(r) moves 3300 cubic feet per minute, draws only 18 amps, and dissipates over 50% more heat than competitive 16" fans on the market. Has all the same great features that the 180 Black Magic X-TREME Fan has.
Part #30928 required for installation. Sold separately.
Fits 1987 to 2006 Wrangler, Rubicon and Unlimited
Mounts directly to the OE radiator mounting locations
16" puller fan
|
This Flex-a-lite temperature control unit turns fan on/off at the desired temperature. It is dial-adjustable from 180-240F, giving the freedom to set one temperature for occasional high-demand use, then reset for highway or day-to-day driving.
|
BELT DRIVEN FLEX FAN
|
BELT DRIVEN RACE FAN 17
|
Flex-a-lite cooling control module combines temperature control and A/C control, plus connection for a manual switch. This switch is suitable for single and small dual electric fans.
|
The Flex-a-lite is a trimline 16-inch fan with a 24 volt motor, making it the perfect fan for cooling hydraulic coolers, A/C condensers, or even small radiators in vehicles with 24 volt charging systems. The Flex-a-lite Trimline electric fans can be used as a primary fan or an auxiliary fan. They are economical fans that free up wasted horsepower and increase gas mileage when used as a primary fan by replacing the stock fan (where applicable). When used as an auxiliary fan, these units will provide additional cooling in an engine prone to overheating.
|
Flex-A-Lite stacked plate engine oil coolers with fans provide class-leading cooling for the toughest engine environments, such as racing and towing. In these extreme conditions, engine coolant alone isn't enough to protect engine oil and internal components from premature wear or failure. Flex-A-Lite engine oil coolers use internal turbulator fins built into their cooling plates and louvered fins for heat transfer to the air. FeaturesStacked plate engine oil coolers with fanSpecificationsCooler Finish: Black PowdercoatedCooler Material: AluminumNumber of Cooling Rows: 21Fan Diameter: 6.5"Core Thickness: 1.75"Inlet Size: 0.87 - 14 in. O-ringOutlet Size: 0.87 - 14 in. O-ringFan CFM Range: 300 - 399- SKU: KSAO567371
|
This Flex-a-lite belt-driven fan is designed to be inexpensive and light, yet still provide maximum cooling. Lightweight nylon construction relieves stress on the water pump and bearings. It is ideal for race and performance applications when cost or weight is a concern.
|
This reversible Flex-a-lite S-blade electric engine cooling fan is designed for quiet operation and efficient air movement. If used as a primary fan, it frees up horsepower that would otherwise have to be used to turn a belt-driven fan. When used as an auxiliary fan, it will provide added cooling to an engine prone to overheating.
|
The Flex-a-lite Trimline fan, when used as a primary fan, can free up wasted horsepower and increase gas mileage by eliminating the drag of the stock belt fan. When used as an auxiliary fan or pusher, this unit can provide additional cooling for air conditioning, or in an engine prone to overheating.
|
The Flex-a-lite X-treme S-blade dual electric fan is designed to offer optimum cooling for situations where small core size and clearance is an issue. With an overall dimension of 26-1/4 inch x 15-1/2 inch and a depth of 4 inch at the motors, this fan is the perfect size to fit many small radiators and still meet your cooling needs. Features a slim shroud design for maximum clearance. Can be used as a pusher or a puller.
|
This reversible Flex-a-lite S-blade electric engine cooling fan is designed for quiet operation and efficient air movement. If used as a primary fan, it frees up horsepower that would otherwise have to be used to turn a belt-driven fan. When used as an auxiliary fan, it will provide added cooling to an engine prone to overheating.
|
The Flex-a-lite Lo-Profile S-Blade Electric Puller Fan is designed to offer optimum cooling for situations where clearance is an issue. At just 2 5/8ať thick, it is one of the lowest profile fans of its kind on the market.
|
The Flex-a-lite Lo-Profile S-Blade Electric Puller Fan is designed to offer optimum cooling for situations where clearance is an issue. At just 2 5/8ať thick, it is one of the lowest profile fans of its kind on the market.
|
For lots of cooling power in a little bit of space, install one of Flex-a-lite's low-profile S-Blade universal electric fans. They're only 2-5/8 in. deep, but the 15 in. wide x 13-1/2 in. high single fans move 1,250 cfm at 11 amps, while the 26-1/4 in. wide x 15-1/2 in. high dual fans move 2,500 cfm. The glass-reinforced nylon S-blades make all of that air move quietly and efficiently, and most fans include rigid brackets and through-core installation kits.
|
This Flex-a-lite #292 Chevy Truck fan is built for the demands of a truck. As a direct bolt-on electric fan kit for many of the 2000-2004 Chevy and GMC trucks with 28ať radiator cores, this fan is the answer to the overheating problems caused by slow, inner city driving, and can solve the cooling problems that occur with body lifts. Up to 17 additional horsepower is transferred to the wheels by removing the mechanical fan, resulting in a gain of as much as 3 mpg in fuel economy.
|
This reversible Flex-a-lite S-blade electric engine cooling fan is designed for quiet operation and efficient air movement. If used as a primary fan, it frees up horsepower that would otherwise have to be used to turn a belt-driven fan. When used as an auxiliary fan, it will provide added cooling to an engine prone to overheating.
|
Fan Electric 15in dual shrouded with VSC, 2004 to 2007 Ford 6.0L Diesel
|
Full Size Truck Electric Fan15 in. Dia.Dual FanCustom Bracket Mountw/Adj. ThermostatA/C RelayVariable Speed ControlFor Use w/34 in. Radiator
|
This Flex-a-lite #270 Ford Truck fan is built for the demands of a truck. As a direct bolt-on electric fan kit for many of the 1997-2005 Ford trucks, this fan is the answer to the overheating problems caused by slow, inner city driving, and can solve the cooling problems that occur with body lifts. Up to 17 additional horsepower is transferred to the wheels by removing the mechanical fan, resulting in a gain of as much as 3 mpg in fuel economy.Installation Pieces are included.
|
Flex-a-lite 15-inch Black Magic S-Blade reversible electric fans can recover engine power and increase fuel economy when used as a primary cooling fan to replace a belt-driven fan. This powerful fan moves 3, 000 cfm of airflow and has a durable injection-molded shroud to draw air through 16x18 inch area. The S-Blade fan design with continuous outer ring provides quiet and efficient operation.
|
The Flex-a-lite Toyota 4x4 fan is a bolt-on electric fan made to eliminate the stock clutch fan in the Toyota 4x4 1984-1996. Pulling 3,000 cubic feet per minute, this fan will help keep your 4x4 cool, while freeing up some extra horsepower at the same time. Comes with an adjustable temperature sensor and A/C relay.
|
This Flex-a-lite Black Magic Xtreme electric fan is the most powerful fan on the market. It covers 45% more radiator surface area than a regular fan. Comes with a one-piece, rugged nylon shroud, creating 45-50% higher heat transfer than a cage fan. This electric fan will keep your engine cool, and improves the horsepower and torque at the wheels by eliminating the parasitic drag of the stock belt-driven fan. It will also allow for quicker warm ups and cool downs, longer water pump life, less fan noise, improve air conditioner performance and improve gas mileage.
|
This Flex-a-lite Black Magic Xtreme electric fan is the most powerful fan on the market. It covers 45% more radiator surface area than a regular fan. Comes with a one-piece, rugged nylon shroud, creating 45-50% higher heat transfer than a cage fan. This electric fan will keep your engine cool, and improves the horsepower and torque at the wheels by eliminating the parasitic drag of the stock belt-driven fan. It will also allow for quicker warm ups and cool downs, longer water pump life, less fan noise, improve air conditioner performance and improve gas mileage.
|
The Flex-a-lite Dodge Hemi fan is a bolt-on electric fan made to eliminate the stock clutch fan in the 2003-2008 Dodge Rams with the Hemi. Pulling 3,300 cubic feet per minute, this fan will help keep your engine cool while at idle, and give you some extra horsepower while driving.
|
2500 CFM,Replaces Clutch Fan Assembly,Increase Gas Mileage,Quicker A/C Response,Quicker Warm-Ups,Quicker Cool-Downs,18.5 Amp Draw
|
This reversible Flex-a-lite S-blade electric engine cooling fan is designed for quiet operation and efficient air movement. If used as a primary fan, it frees up horsepower that would otherwise have to be used to turn a belt-driven fan. When used as an auxiliary fan, it will provide added cooling to an engine prone to overheating.
|
The Flex-a-lite Trimline fan, when used as a primary fan, can free up wasted horsepower and increase gas mileage by eliminating the drag of the stock belt fan. When used as an auxiliary fan or pusher, this unit can provide additional cooling for air conditioning, or in an engine prone to overheating.
|
These Universal Fit, Flex-A-Lite, Belt Driven Fans feature innovative, high-tech construction and designs that are available in a variety of configurations to meet your rig's engine cooling needs. Flex-A-Lite Fans have been proven off and on the racetrack for nearly five decades. Flex-A-Lite Fans will improve gas mileage, gain horsepower, operate more quietly, reduce stress on your water pump, and more. All this equates to better over-all engine performance for your race truck, rock crawler or daily driver.
|
These Flex-a-lite fluid cooler mounting kits are designed for mounting a transmission cooler, engine oil cooler, or electric fan. They include mounting rods, retaining nuts, and all necessary hardware.
Tranny Cooler Remount Kit
Incl. 4 Sets Of Nylon Bolts/Washers/Push-Nuts/Rubber Spacers
|
Better cooling, lighter weight, stronger construction - the new Flex-A-Lite line of transmission coolers raise the bar in performance cooling. The new Flex-A-Lite transmission coolers provide class-leading cooling for the toughest environments, such as racing and towing. Dimpled plate and fin design improves cooling efficiently while minimizing transmission-oil pressure drop. All-aluminum construction makes the coolers lightweight, yet extremely strong and durable. This Flex-A-Lite stacked-plate, 17-row transmission cooler measures 11 x 6 x 3/4 inches and has 3/8 inch barbed fittings. NOTE: Product shown in photo may be a different size and may have different details from what is described/shown on this page. It is from the same product line and is representative.
|
Better cooling, lighter weight, stronger construction - the new Flex-A-Lite line of transmission coolers raise the bar in performance cooling. The new Flex-A-Lite transmission coolers provide class-leading cooling for the toughest environments, such as racing and towing. Dimpled plate and fin design improves cooling efficiently while minimizing transmission-oil pressure drop. All-aluminum construction makes the coolers lightweight, yet extremely strong and durable. This Flex-A-Lite stacked-plate, 23-row transmission cooler measures 11 x 7 7/8 x 3/4 inches and has 3/8 inch barbed fittings. NOTE: Product shown in photo may be a different size and may have different details from what is described/shown on this page. It is from the same product line and is representative.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |