G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available. G2 Axle and Gear Jeep JK Rubicon Dana 44 Front 4.11 Ring & Pinion Set; Designed for High Performance Applications; Forged from High Strength 8620 Steel; Heat Treated for Long Service Life; Lapped for Smooth and Quiet Operation; 10 Year Warranty
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
For Use With 4.10 And Down Carrier
Check With Vehicle Manufacture For Proper Fitment
10 Year Warranty
Computer Heat Treated 8620 Steel
Manufactured To O.E. Specifications
Double Shot Peened
Double Lapped
|
G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
For Use On Dana 25/27/30 Front Axles Except KJ
Cast From Lightweight Aluminum To Dissipate Heat
Raw Aluminum Finish
ReinForcing Ribs For Added Rigidity And Strength
Heat Treated And Shot Peened To Help Handle A Direct Impact
Fully Machined Seal Surface For A Leak Free Installation
|
G2 Master kits include all the parts that are needed to properly install a ring and pinion. These G2 kits include hard to find parts like a proper shim kit, replacement pinion nut , crush sleeve, pinion seal, pinion bearings, carrier bearings, ring gear bolts, silicone sealer, locktite and gear marking compound. these are the parts that the auto parts store never seems to have or ever herd of. Pinion Nut
Pinion Seal
Timken Outer Pinion Bearing And Race
Crush Sleeve
Timken Inner Pinion Bearing And Race
Pinion Shims
Carrier Shims
Carrier Bearings And Races
Ring Gear Bolts
Thread Locking Compound
Gear Marking Compound
Silicone Sealer
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
Dana 30
27 Spline
32.312"" Overall Length
Accepts 5-760X U-Joint
Passenger Side
Machined to Accept Full Circle Clips
For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
Dana 30
30 Spline
27.02"" Overall Length
Accepts 5-760X U-Joint
Driver Side
Machined to Accept Full Circle Clips
For use in 72-81 Jeep CJ
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
Dana 30
30 Spline
15.82"" Overall Length
Accepts 5-760X U-Joint
Passenger Side
Machined to Accept Full Circle Clips
For use in 82-86 Jeep CJ
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
Dana 30
27 Spline
16.50"" Overall Length
Accepts 5-760X U-Joint
Driver Side
Machined to Accept Full Circle Clips
For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
|
G2 Axle and Gear chromoly inner axle shaft Dana 30, Dana 30, 30 spline, 32.312 inch overall length. It accepts 5-760X U-joint, passenger side. It is machined to accept full circle clips. It is used in 87-06 jeep XJ/YJ/TJ w/5-760X U-joint.
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
For Use With 3.73 And Up Carrier
10 Year Warranty
Computer Heat Treated 8620 Steel
Manufactured To O.E. Specifications
Double Shot Peened
Double Lapped
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
For Use With 3.73 And Up Carrier
10 Year Warranty
Computer Heat Treated 8620 Steel
Manufactured To O.E. Specifications
Double Shot Peened
Double Lapped
|
Dana 30 short 4.56 G-2 ring and pinion set. It has limited lifetime warranty. It is also computer heat treated 8620 steel. It is manufactured to O.E. specs, double shot peened and double lapped. It is used with 3.73 and up carrier.
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available. For Use In 97-05 Jeep TJ Wrangler Front;For Use In 99 -05 Jeep WJ Grand Cherokee Front;For Use In 00-05 Jeep XJ Cherokee Front;For Use In 96.5-98 Jeep ZJ Grand Cherokee Front;For Use With 3.73 And Up Carrier;10 Year Warranty;Computer Heat Treated 8620 Steel;Manufactured To O.E. Specifications;Double Shot Peened;Double Lapped
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
For Use In 84-99 Jeep XJ Cherokee Front
For Use In 87-96 Jeep YJ Wrangler Front
For Use With 3.73 And Up Carrier
10 Year Warranty
Computer Heat Treated 8620 Steel
Manufactured To O.E. Specifications
Double Shot Peened
Double Lapped
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
For Use In 84-99 Jeep XJ Cherokee Front
For Use In 87-96 Jeep YJ Wrangler Front
For Use With 3.73 And Up Carrier
10 Year Warranty
Computer Heat Treated 8620 Steel
Manufactured To O.E. Specifications
Double Shot Peened
Double Lapped
|
Dana 30 reverse 4.88 G-2 ring and pinion set. It has limited lifetime warranty. It is also computer heat treated 8620 steel. It is manufactured to O.E. specs, double shot peened and double lapped. It is used with 3.73 and up carrier.
|
G2 Axle and Gear Minor Instalationl Kit are designed for the installer that is working on a newer vehicle that has no need to change the bearings. These kits include all the parts that must be changed to properly install a ring and pinion. ZJ FRONT 93-96 FOR OE R&P G2 Axle and Gear Dana 30 TJ Minor Installation Kit; Jeep Grand Cherokee ZJ 93-96; Use ww/factory ring and pinion
|
G2 Axle and Gear Minor Instalationl Kit are designed for the installer that is working on a newer vehicle that has no need to change the bearings. These kits include all the parts that must be changed to properly install a ring and pinion. ZJ FRONT 93-96 NON OE R&P G2 Axle and Gear Dana 30 TJ Minor Installation Kit; Jeep Grand Cherokee ZJ Front 93-96; Use with aftermarket gear set
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Outer Axle Shaft
Dana 30/44
27 Spline
6.15"" Overall Length
Accepts 5-760X U-Joint
Driver and Passenger Side
Machined to Accept Full Circle Clips
For use in Jeep XJ/YJ/TJ w/5-760X U-Joint
|
G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle. BLACK POWDER COAT FINISH Dana 35;Cast From Lighweight Aluminum to Disipate Heat;Reinforcing Ribs for Added Rigidity and Strength;Heat Treated and Shot Peened to Handle Direct Impact;Fully Machined Seal Surface for a Leak Free Installation;Black powder coated
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Dana 35 Replacement Axle Shaft
Dana 35
30 Spline
29 1/8in. Overall Length
5 on 4.5in. & 5 on 5.5in. Bolt Circle
Passenger Side
1/2in. X 20 UNF Wheel Studs
For use in 90-06 Jeep YJ/XJ/TJ (C-Clip) w/30 Spline Upgrade
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Dana 35 Replacement Axle Shaft
Dana 35
30 Spline
30 5/8in.Overall Length
5 on 4.5in. & 5 on 5.5in. Bolt Circle
Driver Side
1/2in. X 20 UNF Wheel Studs
For use in 90-06 Jeep YJ/XJ/TJ (C-Clip) w/30 Spline Upgrade
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
Dana 44
30 Spline
36.13"" Overall Length
Accepts 5-760X U-Joint
Driver Side
Machined to Accept Full Circle Clips
For use in 73-78 GM Dana 44
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
Dana 44
30 Spline
32.91"" Overall Length
Accepts 5-760X U-Joint
Driver Side
Machined to Accept Full Circle Clips
For use in Scout Dana 44
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
Dana44
30 Spline
16.62" Overall Length
Accepts D/S 5-7166 U-Joint
Driver Side
Machined to Accept Full Circle Clips
For use in 03-06 Jeep Dana 44 w/Rubicon Option
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
Dana 44
30 Spline
14.690"" Overall Length
Accepts 5-760X U-Joint
Passenger Side
Machined to Accept Full Circle Clips
For use in 74-79 Jeep Wagoneer
|
G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
G2 Axle and Gear Chromoly Outer Axle Shaft
Dana 44
19 Spline
9.72"" Overall Length
Accepts 5-760X U-Joint
Driver and Passenger Side
Machined to Accept Full Circle Clips
For use in Ford Dana 44
|
G2 Axle and Gear Minor Installation Kit are designed for the installer that is working on a newer vehicle that has no need to change the bearings. These kits include all the parts that are needed to properly install a ring and pinion. These G2 kits include hard to find parts like a proper shim kit, replacement pinion nut , crush sleeve, pinion seal, ring gear bolts, silicone sealer, locktite and gear marking compound. these are the parts that the auto parts store never seems to have or ever herd of.
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Carrier Shims
Ring Gear Bolts
Thread Locking Compound
Gear Marking Compound
Silicone Sealer
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
|
G2 Performance Ring & Pinion sets are engineered with todays most demanding applications in mind. Designed to hold up to oversized tires and high performance engines, these gears use use the latest technology and materials in their manufacturing to give you the strongest and quietest performance gear sets available.
For Use With 3.73 And Down Carrier
10 Year Warranty
Computer Heat Treated 8620 Steel
Manufactured To O.E. Specifications
Double Shot Peened
Double Lapped
|
G2 Axle and Gear Minor Installation Kit are designed for the installer that is working on a newer vehicle that has no need to change the bearings. These kits include all the parts that are needed to properly install a ring and pinion. These G2 kits include hard to find parts like a proper shim kit, replacement pinion nut , crush sleeve, pinion seal, ring gear bolts, silicone sealer, locktite and gear marking compound. these are the parts that the auto parts store never seems to have or ever herd of.
Pinion Nut
Pinion Seal
Crush Sleeve
Pinion Shims
Carrier Shims
Ring Gear Bolts
Thread Locking Compound
Gear Marking Compound
Silicone Sealer
|
G2's new made in the USA Placer Gold Series Axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas. REAR 32 SPLINE LH 07-Current Wrangler JK, 2 & 4 Door;Rubicon models;Driver side;Dana 44 rear axles;For use with 32 spline aftermarket lockers;Forged from 4340 Chromoloy steel;Dual bolt pattern flange 5x5 and 5x5.5;Made in the USA
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |