Compact and lightweight, this meter is designed for use on a hose. 3 to 30 GPM, NPT thread, and two totals (accumulative and batch). For use with gas up to E15, diesel up to 20% biodiesel.Inner diameter: 1Design type: turbineFitting: NPTAccuracy: 5.0 %Repeatability: 0.5 %Flow range: 3 to 30 GPM, 10 to 100 LPMOperating temperature: +14 to +130 F, -10 to +54 CDisplay: LCDReads: gallonsElectronic choice: two totals (local)Pressure rating: 300 PSI, 21 barWetted materials: aluminum housing, nylon rotor, ceramic bearings, tungsten carbide shaft, 316 stainless steel ringsTo use with: Biodiesel (B100), Diesel fuel (up to 20% biodiesel blends), Gasoline (up to 15 % alcohol blends), KeroseneDo not use with: water or chemicals.For use with gas up to E15, diesel up to 20% biodiesel.
|
The GPI 01N31GM digital turbine water flowmeter is made from durable nylon and features an LCD display that is accurate to +/-5 percent of reading. This economical turbine meter is designed for flow rates from 3 to 30 GPM and is factory calibrated in gallons for use with water. The lightweight 01N31GM mounts easily to the end of a hose and is ideal for use with free flow gravity systems or combined with an electric transfer pump as part of an irrigation or water management system. The GPI 01N31GM digital flow meter has 1-inch FNPT inlet/outlet and comes with two standard AAA batteries.
|
|
|
GPI carries a full line of spare parts and accessories for our pumps and meters. The GPI 110909-1 Bung adapter kit includes one bung adapter, a fiber union ring gasket, and instruction sheet. This part is compatible with 12V, 24V, and 115V GPI pumps.
|
Dee-Zee's Liquid Transfer Pumps are relable and durable for on the Job use
Liquid Transfer EZ-8 Electric Pump
10 ft. x 5/8 in. Hose
Delivers 8 GPM
12 Volt
15 ft. Power Cord
|
|
FeaturesWater & particulate filterMade of high quality steelSpecificationsMax Pressure: 50 PSIMax Flo Rate: 18 gal/ minuteParticle Retention Size 10 micronDimension: 8.35" H x 3.65" W x 3.7" LWeight: 1.36 lbs- SKU: HRZND2691
|
|
Flowmeter, Mechanical, GPM Max. 20, Max. Pressure (PSI) 50, Connection Size (In.) 1 MNPT, Max. Temp. (F) 125, Length (In.) 5-13/16, Width (In.) 5-1/4, Height (In.) 4-1/2, Housing Material Aluminum, Fitting Aluminum, Chamber Material PBT Polyestester, Seal Material Nitrile, Shaft Material Stainless Steel, Flow Range 4 to 20 gpm, Display Mechancial Register, Resetable Cumulative Totalizer 999.9 Gallons in 1/10 Gallon Increments, Max. Viscosity Diesel fuel, For Pipe Size 1 In.
|
|
|
The GPI Gear Pump Overhaul and Conversion Kit (#110504-1) is designed to help keep GPI 12-volt, 24-volt, and 115-volt gear pumps running as long as possible. It includes two gears, a drive key and replacement seals for the gear cover motor shaft, a poppet, a strainer, and a switch cover plate. Complete overhaul Kit for your GPI gear pump. Whether you have an M-150, M-180 or M-240 this kit will allow your pump to return to the performance it had on the first day it was used.
|
12 Volt fuel transfer pump with proven dependability and efficiency. Overload protection motor for long life. Comes with 12 Ft. of 3/4 In. grounded hose and nozzle, adjustable suction pipe, 18 Ft. x 12/2 AWG power cord, and a convenient spin collar for easy installation. Pump works with diesel fuel (up to 20% biodiesel blends such as B20), gasoline (up to 15% alcohol blends such as E15), and kerosene. UL listed, CSA certified.This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
|
12 Volt economy fuel transfer pump with proven dependability and efficiency. Overload protection motor for long life. Comes with 10 Ft. of 3/4 In. grounded hose and a manual nozzle, 2-Pc. suction pipe, 18 Ft. x 12/2 AWG power cord, and a convenient spin collar for easy installation. Pump works with diesel fuel (up to 20% biodiesel blends such as B20), gasoline (up to 15% alcohol blends such as E15), and kerosene. 18 Ft. power cord. UL listed, CSA certified.This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
|
FeaturesUp to 15 gpm (57 lpm)12 volt dc nickle plated aluminum - gear explosion proof motor (pump only)Specially designed for use with methanolConvenient spin collar for easy installationMotors are u.l.&csa listedSpecificationsVoltage: 12V DCWeight: 29.5 lbs- SKU: MYRD112174
|
|
|
More operating hours means longer pump life and greater value. Convenient spin collar provides for easy installation and versatile pump mounting.Lightweight aluminum body provides corrosion resistance and reduces tank stress. Lockable nozzle cover protects your investment and deters theft.Designed for permanent mounting on vented storage tanks. Low profile design.1-inch manual leaded nozzle, 1-inch x 12-foot static wire hose, 18-foot power cord and two-piece adjustable suction pipe (15-inch to 40-inch). For use with gasoline (gasohol up to E15), diesel fuel (bio-diesel blends up to B20) and kerosene.UL Listed Motor and CSA Certified & 2 year warranty.
|
|
Everything you need in one convenient set, the EZ8 pump Rebuild kit is the perfect addition to any garage or workshop. The handy kit includes a motor shaft key, two gears, & a set of replacement seals.
|
The GPI 110121-8, Automatic Unleaded Shutoff Nozzle with 0.75 in. Inlet and 0.75 in. straight spout is designed to attach to a 0.75 in. fuel hose for safe, reliable dispensing of gasoline (up to 10% alcohol blends such as E10), diesel fuel (up to 20% bio-diesel blends such as B20), and kerosene. One-finger design with hold-open clip lets you quickly set the desired flow rate up to 18 GPM (68 L/min). UL listed.
|
The rugged GPI M-180S-ML/Filter transfer pump and filter combo is an exceptional value, providing longer run times and award-winning performance. The 12-VDC motor delivers flow rates up to 18 GPM. The M-180S-ML/Filter combo unit includes an 18 GPM particulate filter with 10 micron nominal filtration to remove fuel contaminants that can damage your equipment. Comes with manual leaded nozzle, hose, power cord, adjustable suction pipe, filter with adapter and installation kit. U.L. listed to U.S. and Canadian standards & 2 year warranty.
|
|
Rotary style hand fuel transfer pump is designed for portable tanks, drums and barrels. Portable and quick to install. Reduces lifting and messy fluid transfer. Delivers up to 10 gallons per 100 revolutions and has a handle lock for security. For use with kerosene, gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20), medium oil (up to 30W), and hydraulic fluid. Pump has a metal nozzle, an adjustable suction pipe up to 40 In. and a 3/4 In. Dia. x 8 Ft. hose. 2 In. NPT tank fitting. 1 In. inlet, 3/4 In. outlet. UL Listed Subject 124.This product can expose you to carbon black which is known to the State of California to cause cancer. For more information go to
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |