Mount your Hi-Lift Jack within easy reach on your Jeep Wrangler! Mounts directly to existing hood hinge holes, no drilling required. 6061-T6 structural anodized aluminum for strength, durability, and a clean look.
|
Mount your Hi-Lift(r) Jack horizontally within easy reach on the roll cage of a Jeep Wrangler JLU (4 Door). Mounts directly to the factory roll cage and allows the Hi-Lift(r) Jack to be mounted in multiple positions based on requirements. Provides secure interior storage with easy access when needed.
TrailTrak(r) can easily become a mounting platform for other storage needs with the addition of the TrailTrak(r) Universal Mounting Hub (sold separately and coming soon). Provides secure storage for items such as Rotopax, Cam Cans, Power Tanks, fire extinguishers, etc.
|
Conveniently mount and store your Hi-Lift Jack on the bed rail of a Jeep Gladiator. Installation is simple using the Jeep Gladiator OEM bed rail system.* No drilling required. Constructed of 6061-T6 anodized structural aluminum for strength, durability, and a clean look. Adaptable for use of aquick fistať type clamps for mounting of tools and equipment, such as an axe or shovel. *Note: Bed rails are not standard equipment on all Jeep Gladiator models.
|
Ideal for winching and recovery use with a Hi-Lift Jack. Polyester material for a controlled pull and to reduce dangerous recoil. Designed for slower, more exact extraction requirements. Reflective loops make night recovery easier. With minimal light, the loops reflect and "shine" making it easier to see both connecting points during the night recovery process.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate. Cast and steel jack Black powder coat Overall length: 41" Max lift height: 27" Weight: 25lbs.
|
Although the Hi-Lift 4xRAC was designed with Jeep(r) owners in mind, it may be installed on any flat surface 2-1/2 wide or more. Drilling required. Kit includes: 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts, 1 handle strap.
It may be installed on any flat surface 2-1/2" wide or more
Kit includes 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts and 1 handle strap
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Black powder coat
Overall length: 44"
Max lift height: 32"
Weight: 27lbs.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Red powder coat
Overall length: 46"
Max lift height: 34"
Weight: 28lbs.
|
Introducing the Hi-Lift UTV! Superior to other jacks, the UTV allows you to lift a UTV from many locations instead of being limited to specific lift points. It is rated at a 4,660 lb load limit and is a true multi-purpose tool. Provides the ability to lift, winch, pull, spread and clamp. It works great in all conditions... water, mud, sand and even snow! It features a powder coated finish with zinc coated hardware for great durability. The top of the jack can be used as a winch, clamp and spreader tool also. We recommend using part# TH-700 (sold separately) for mounting it to your vehicle.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Red powder coat
Overall length: 51"
Max lift height: 38.5"
Weight: 29lbs.
|
Mount your Hi-Lift Jack within easy reach on any Jeep Wrangler and CJ. Mounts directly to existing hood hinge holes, no drilling required. 6061-T6 structural anodized aluminum for strength, durability, and a clean look.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Red powder coat
Overall length: 60"
Max lift height: 50"
Weight: 32lbs.
|
Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Cast and steel jack
Black powder coat
Overall length: 60"
Max lift height: 48"
Weight: 31lbs.
|
The Hi-Lift X-TREME is for the serious Hi-Lift user, offering the "top of the line" all-cast version (48" or 60" sizes) with a special top winch-clamp-spreader attachment that provides the ultimate in multi-use functionality. The X-TREME Top Clamp replaces the top clamp-clevis of the standard Hi-Lift models and provides the ability to winch, clamp, and spread up to 5, 000 lbs. X-TREME Top Clamp Features: - 7/8" shackle holes for easy, secure, non-binding attachment - 3/8" chain slot for easy, secure winching and quick slack adjustment. No hook is required. - Attachable at any point on the Jack steel standard bar for more versatility. - Cut-out wedge for gripping when spreading. Tested and certified to meet applicable requirements of ASME B30.1-2015.
|
SLIDE'N'LOCK 93in BLACK
|
Designed for mounting a Hi-Lift(r) jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.
Fits 2"-3" diameter bars
Manufactured of 6061-T6 structural aluminum
Stainless steel hardware
Securely stores your Hi-Lift(r) jack
|
A must-have item for Hi-Lift Jack owners! The rugged polyurethane Hi-Lift Handle Keeper firmly holds the Hi-Lift Jack handle to the upright steel I-beam of the jack, keeping the handle in place when not in use and eliminating rattling during transportation and storage. Hi-Lift's unique design allows the Handle Keeper to be slipped on or off the jack without having to remove the Top Clamp/Clevis! Available in Black and Red.
Black
Rugged polyurethane Hi-Lift handle keeper firmly holds the Hi-Lift Jack handle
|
3,000 lb capacity. Used with Hi-Lift Jack for bumpers that are slotted or have a curved surface. Manufactured of high-quality steel. Makes raising one wheel of average vehicle easy. Designed to be used with Hi-Lift Jacks only.
When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2 (5 cm) above the ground an easy task.
Never attempt to lift more than one wheel at a time.
|
CHAIN AND HOOK F/POST POP
|
EQUIP. AGRICULTURE JACK
|
Extra parts for servicing all Hi-Lift Jack lifting units. Kit includes: 2 climbing pins, 2 climbing pin springs, 2 cross pins, 1 shear bolt and nut and 1 tube of jack lubricant.
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
The locking knob is a "must have" for any hood mount. Adjustable tube mount, 4XRAC, or LOC-RAC owner. The locking knob replaces an existing knob or wing nut provided on Hi-Lift(r) Jack mounting accessories. Once tightened, the locking knob can be locked with the provided key. Once locked, the locking knob spins freely and cannot be removed, securing the Hi-Lift(r) Jack in the mount. There are two size locking knobs available... one model (HM-LK) fits Hood Mounts only. The other model (VERS-LK) fits Adjustable Tube Mounts, 4XRAC's, and Loc-Rac's. The VERS-LK can also be used to secure and lock the Unique Winch-Clamp-Spreader Attachment that comes only with the Hi-Lift(r) X-TREME Jacks.
|
Designed for mounting a Hi-Lift(r) jack to round and square tube bumpers, bull bars, roll cages, and roof racks. Allows for easy and adjustable mounting on round tube from 1" up to 3" in diameter. The large set is designed for round tube from 2-3" in diameter that will work on most vehicle bull bars and roll cages. The small set is designed for round tube from 1-2" in diameter, which works on many roof racks, and also ATV/UTV bars, bumpers and roll cages.
Fits 1"-2" diameter bars
Manufactured of 6061-T6 structural aluminum
Stainless steel hardware
Securely stores your Hi-Lift(r) jack
|
Increase your support surface area and make the original power tool even more versatile. Use the Hi-Lift Off-Road Base to alleviate jack sinkage on soft ground.
|
The Hi-Lift Jack Off-Road Kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Use this kit to turn your Hi-Lift jack into an even more versatile tool.
|
The Hi-Lift X-TREME is for the serious Hi-Lift user, offering the "top of the line" all-cast version (48" or 60" sizes) with a special top winch-clamp-spreader attachment that provides the ultimate in multi-use functionality. The X-TREME Top Clamp replaces the top clamp-clevis of the standard Hi-Lift models and provides the ability to winch, clamp, and spread up to 5, 000 lbs. X-TREME Top Clamp Features: - 7/8ať shackle holes for easy, secure, non-binding attachment - 3/8ať chain slot for easy, secure winching and quick slack adjustment. No hook is required. - Attachable at any point on the Jacka(tm)s steel standard bar for more versatility. - Cut-out wedge for gripping when spreading. Tested and certified to meet applicable requirements of ASME B30.1-2015.
|
Keep your Hi-Lift Jack Running Gear (or lifting assembly) protected from mud, dirt and grime. The Hi-Lift Running Gear Jack Cover is designed to greatly reduce the amount of dirt and mud that can accumulate in the working mechanism of the Hi-Lift Jack. Easy On, Easy Off Zipper Design Made with Marine Grade Vinyl (UV Protected, Mold and Mildew Resistant) Features carbon fiber embossing and PVC Hi-Lift logo patch Fits all Hi-Lift Jack Models The Running Gear Jack Cover (Part# RGJC) is a substantial improvement over, and replaces, the Neoprene Jack Cover (Part# NJC). Improved Features: High quality zipper Stronger material resists fading and tearing Improved fit
|
For agriculture, automotive, offroad, hardware, industrial and DIY uses. Multi purpose, for lifting, winching and clamping. Low pick-up with lifting nose only 4-1/2'' from bottom of base plate. 4-1/2'' lifting nose for safe, positive contact with load. 28
square inch base plate for extra stability. Complete with adjustable top clamp clevis for use in clamping and winching. For speedy disengaging, lifting unit automatically drops away when load is removed. Safety bolt is designed to shear at 7,000 pounds.
Approximate weight 30 pounds.
Hght In=48
This item cannot be shipped to APO/FPO addresses. Please accept our apologies
|
Protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant. Fits 36", 42", 48" and 60" Hi-Lift Jacks. The Jack Protector WILL work with the 4XRAC and the LOC-RAC (user will have to place holes in protector). Soft Case Easily Stores. Drawstring Closure. (Note: All working parts of the 60" jack are protected. However, the foot piece and 5" of steel bar are exposed.)
Protect your Hi-Lift Jack from weather, mud, dirt and sand
Fits 36", 42", 48" and 60" Hi-Lift Jacks
Jack protector willL work with the 4XRAC and the LOC-RAC
|
In recent years, many vehicle changes have been made in body styles, bumper styles, larger tires and/or lift kits added, making it harder to find a place to jack up your vehicle. The Lift-Mate is designed to provide a lifting point from most wheels (instead of the bumper) when used with a Hi-Lift(r), the Lift-Mate makes raising one wheel of most average-sized vehicles a quick an easy lifting task.
|
The Hi-Lift Jack Loc-Rac Truck Bed Jack Mounting System allows convenient, secure mounting of a Hi-Lift jack to the inside of a pick-up bed. The Loc-Rac can be mounted horizontally or vertically and used with or without a Jack Protector. Although designed to fit the bedrails of most pick-ups it can be used wherever a flat mounting surface is available. Lockable to deter theft.
|
A must-have item for Hi-Lift Jack owners! The rugged polyurethane Hi-Lift Handle Keeper firmly holds the Hi-Lift Jack handle to the upright steel I-beam of the jack, keeping the handle in place when not in use and eliminating rattling during transportation and storage. Hi-Lift's unique design allows the Handle Keeper to be slipped on or off the jack without having to remove the Top Clamp/Clevis! Available in Black and Red.
Red
Rugged polyurethane Hi-Lift handle keeper firmly holds the Hi-Lift Jack handle
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |