This original equipment-style air cleaner features a deep-dish and highly polished chrome top accented by a chrome-plated wing nut. It features a classic designed top and comes with a gasket and hardware. A flame retardant, replaceable paper element with a high CFM rating is used in these units for safety. This air cleaner is sold individually.
|
Mr. Gasket Easy-Flow Air Cleaners give you that show-car look for a bargain price. Designed to fit single 2-, 3-, and 4-barrel carburetors with 5-1/8-inch necks, this efficient, high-CFM air cleaner features a 14-inch plated-steel base and a durable chrome-finished top cover that encloses a replaceable flame-retardant paper element and comes complete with a hold-down stud and a wing nut.
|
CARB SPACER 4 HOLE 1 IN
|
COMPETITION WIRE LOOMS
|
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won t shrink deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing. COPPER EXH GSKT-FORD SB These Are Made From .043 Solid Copper They Have A .051 Embossment Around Port End Holes Are Slotted For Ease Of Installation Seals Minor Surface Irregularities Made From Dead Soft Copper In Exhaust Manifold Gas
|
CUSTOM WIRE LOOM KIT
|
Mr. Gasket Aluminum Fan Spacer Kit allows adjustments of the fan-to-radiator clearance. It is designed to move the fan closer to the radiator shroud. This 2" thick spacer is manufactured from aluminum with a natural finish. This kit includes spacer, washer, and bolts.
|
Mr. Gasket Aluminum Fan Spacer Kit allows adjustments of the fan-to-radiator clearance. It is designed to move fan closer to the radiator shroud. This 1/2" thick spacer is manufactured from aluminum with a natural finish. This kit includes spacer, washer, and bolts.
|
Mr. Gasket Aluminum Fan Spacer Kit allows adjustments of the fan-to-radiator clearance. It is designed to move fan closer to the radiator shroud. This 1" thick spacer is manufactured from aluminum with a natural finish. This kit includes spacer, washer, and bolts.
|
For use with standard shift 6 and 8 cylinder engines. Includes set of 6 bolts.
Fits 1972 to 1995 YJ Wrangler and CJ
Standard shift 6 and 8 cylinder engines
Includes set of 6 bolts
|
Mr. Gasket Fuel Pressure Gauge Adapters are ideal for adding a fuel pressure gauge to the fuel system. They are perfect for use in single carburetor stock-type engines or multi-carburetion where Y fuel block and fittings are not used. They allow installation of any gauge with 1/8 NPT port.
|
Adjusts fuel pressure from 1 to 6 lbs. Includes Fittings and Regulator. Recommended to be used with Weber & Interco carburetors for they only require 3.5 lbs. of fuel pressure.
Adjusts fuel pressure from 1 to 6 lbs.
Fits 5/16"3/8"ID. fuel line
Includes fittings
Recommended to be used with the Weber and Interco carburetors as they only require 3.5 lbs. of fuel pressure
|
Mr. Gasket Micro Electric Fuel Pumps eliminates vapor lock and flooding. Micro electric fuel pump works well as a fuel transfer pump and makes a great stand-alone or booster pump. It comes with a self-priming pump with simple two-wire design. Micro electric fuel pumps works on 12 volt negative ground systems only. It also includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. It is a universal design for most domestic 4, 6, and 8 cylinder carburetor applications.
|
Mr. Gasket Headlock Locking Header bolts eliminates the need for lock washers. The serrated teeth grip header flange surface providing a locking action to maintain consistent header bolt clamp-load. Made from high-grade stainless steel Grade 8 bolts with 150,000 PSI tensile strength they are both strong and will resist rust and corrosion. The thread-lock patch prevents header bolt torque loss, provides positive thread seal and locking action in severe duty engine vibration and heat cycle conditions. The combination hex/socket head design makes installation easy and a hex tool is included.
|
The Mr. Gasket Competition Wire Separator Kit is designed for competition and street use, this black competition wire separator minimizes cross firing by keeping the ignition wires separated. It is made of heat resistant plastic and will accommodate 7 and 8mm ignition wires. This kit can be used where extreme high temperatures cause normal materials to sag or melt. It includes two each 2-wire, 3-wire, and 4-wire separators and can be easily installed.
|
Mr.Gasket Pressure Plate Bolts ensure safety and strength with ultra-seal bolts for your pressure plate. They are heat-treated to grade 8 specifications for strength and black plated to resist rust and corrosion. These Borg-Bec/Diaphragm style bolts have the diameter of 3/8"-16 x 1" and are sold six per set. These fasteners play a key role in both the performance and safety of a vehicle. The kit is complete with lock washers.
|
Prevent dangerous gases from entering the passenger compartment of your vehicle with a proper fitting shifter boot from Mr. Gasket.
|
Mr. Gasket Disc Brake Wheel Spacer is constructed from die-cast aluminum and provides the necessary clearance for custom wheel applications. It is 1/4" thick. Sold 2 per kit.
|
Mr. Gasket 5/16" disc brake bolt pattern wheel spacer kits are designed from superior quality die-cast aluminum. Provides necessary clearance for custom wheel applications. Fits 5 lug and 4-1/2 to 5 bolt patterns.
|
Mr. Gasket Disc Brake Wheel Spacer is constructed from die-cast aluminum and provides the necessary clearance for custom wheel applications. It is 7/16" thick. Sold 2 per kit.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |