Flow-Pur - No 7 FILTER - 99 percentage cyst reduction sediment filter cartridge with flow rate of 3 gallon per minute. Replacement cartridge for Flow-Pur ultimate system and fits most name brand housings. No 7 Filter.
|
|
1/2 IN NPT to 1/2 IN NPS Plastic Cone Seal, Contractor Pack_This 1/2 inch NPT to 1/2 inch NPS AquaLock(TM) plastic cone seal is designed and manufactured for many years of trouble free service. Produced of off-white polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. This cone seal is used with AquaLock(TM) plastic female swivel elbow 3520 and plastic female adapters 3501. Available in bulk quantities as contractor pack._Rotates under pressure after installed for high flexibility during installation_Zero-leak connections_No tools required for installation or removal_Can be used for hot and cold water applications, including behind the wall applications_Works with copper, CPVC, PEX, and CTS rated pipe_25-year limited warranty_Specifications_Brand Watts_Brass Insert No_Buy American Act Compliant NO_EAN 840213002459_Finish Plastic_Fitting Name Does Not Apply To Product_Inlet Connection Size 1/2 IN_Inlet Connection Type Does Not Apply To Product_Inlet Material Polysulfone_Material Polysulfone_Maximum Working Pressure-BAR 17.25_Maximum Working Pressure-PSI 250_Maximum Working Temperature-Celsius 24.00_Maximum Working Temperature-Fahrenheit 75_Minimum Temperature - Celsius 0.56_Minimum Temperature-Fahrenheit 33_Outer Diameter Does Not Apply To Product_Outlet Connection Size 1/2 IN_Outlet Connection Type Male Threaded_Outlet Material Polysulfone_Outlet Thread Type NPT_Part Number 81902634_Series Cone Seal 35161_Suitable for Gas Service No
|
QUICK CONNECT END STOP
Type 45 end stop
For quick, easy connections without tools
For plastic-copper-CPVC or polybutylene piping
Made of polysulfone material
Do not expose to VOCs or caustic chemicals
1 per poly bag
3545-10 1/2 IN. CAP
SIZE:1/2"CTS
|
1/2" x 1/2", Quick Connect Straight Stop, Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
Watts AquaLock Push-To-Connect Valves are designed and manufactured for many years of trouble free service. Produced of off white Polysulfone a high performance thermal plastic material the Watts AquaLock design allows for quick and easy connections without the use of installation tools. Connection shall be made using Watts AquaLock Plastic push-to-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and reuse without the use of disconnection tools. Fitting must not disassemble to disconnect. Ratings: 100 PSI at 180?F (6.8 Bar at 82?C) and 250 PSI at 75?F (17.3 Bar at 24?C). Approvals: NSF-61 NSF-14 CSA B137.5 ASTM F877 UPC ASSE 1061.
|
1/2", Quick Connect Coupling, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
1/2", Quick Connect Elbow, Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
1/2", Quick Connect Tee, Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
1/2" Copper Tube Size, x 1/2" Female Pipe Thread Quick Connect Adapter, Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
1/2" x 1/2" Female, Quick Connect Swivel, Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
1/2" Copper Tube Size x 1/2" Male Pipe Thread, Quick Connect Adapter, Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
1/2" Quick Connect x 1/2" Male Pipe Thread Quick Connect Elbow, Hold Up To 250 PSI, 1 Piece, No Parts To Assemble Or Lose, Quick Connect Design Allows Quick & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing Repair Projects For Pex, Copper, & CPVC Pipe, Just Cut Pipe & Push Pex, Copper Or CPVC Tubing Into Fitting End Until Tubing Seats At Stop, Can Be Disconnected By Pulling Back On Ring & Releasing Pipe, Only Fitting Of Its Type Code Approved For Behind Wall Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & Approved, Excellent Replacement For Qest & Flare It Type Fittings.
|
|
FROM THE MANUFACTURER \n Equipped with garden hose fittings to install outside of RV/Boat to water supply hose. GAC Filter included with housing, bracket and wrench. Cartridge reduces chlorine, sediment, unpleasant taste and odors. Flow rate 2.5 -GPM.
|
|
Sea Tech 35 Series products are designed and manufactured to be trouble free for many years of service life. 35 Series products are designed and manufactured in Polysulfone a high performance thermal plastic material. The majority of 35 Series products are approved and certified to NSF-61 NSF-14 CSA B137.5 ASTM F877 and IAPMO ASSE 1061-2006 and to the Uniform Plumbing Code (U.P. Code). 35 Series products are available in standard imperial Inch sizes and interconnect with all Sea Tech 24 Series fittings. The Sea Tech quick connect design allows for quick and easy connections without installation tools. Simply cut the plastic copper or CPVC piping and snap a Sea Tech fitting in place for a zero-leak connection.
|
|
Sea Tech 35 Series products are designed and manufactured to be trouble free for many years of service life. 35 Series products are designed and manufactured in Polysulfone a high performance thermal plastic material. The majority of 35 Series products are approved and certified to NSF-61 NSF-14 CSA B137.5 ASTM F877 and IAPMO ASSE 1061-2006 and to the Uniform Plumbing Code (U.P. Code). 35 Series products are available in standard imperial Inch sizes and interconnect with all Sea Tech 24 Series fittings. The Sea Tech quick connect design allows for quick and easy connections without installation tools. Simply cut the plastic copper or CPVC piping and snap a Sea Tech fitting in place for a zero-leak connection.
|
Sea Tech 35 Series products are designed and manufactured to be trouble free for many years of service life. 35 Series products are designed and manufactured in Polysulfone, a high performance thermal plastic material. The majority of 35 Series products are approved and certified to NSF-61, NSF-14, CSA B137.5, ASTM F877, and IAPMO ASSE 1061-2006 and to the Uniform Plumbing Code (U.P. Code). 35 Series products are available in standard imperial inch sizes and interconnect with all Sea Tech 24 Series fittings. The Sea Tech quick connect design allows for quick and easy connections without installation tools. Simply cut the plastic, copper or CPVC piping and snap a Sea Tech fitting in place for a zero-leak connection. Fittings Performance Rating Operating Pressure: Vacuum to 250psi Max Temperature: 1800F @ 100psi / 750F @ 250psi Sea Tech connectors utlize a swivel nut with NPS straight threads and a cone seal. This allows the installer to thread onto NPT, NPS, BSP, and
|
|
Watts Exterior Inline Water Filter - Designed for the weekend or occasional camper. Granulated activated carbon filter reduces chlorine, volatile organic chemicals, taste, odor and sediment.
|
3/8 IN CTS x 1/2 IN NPS Plastic Female Adapter, Contractor Pack_This 3/8 inch CTS x 1/2 inch NPS AquaLock(TM) plastic female adapter works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications. Available in bulk quantities as contractor pack._25-year limited warranty_Can be used for hot and cold water applications, including behind the wall applications_Works with copper, CPVC, PEX, and CTS rated pipe_Rotates under pressure after installed for high flexibility during installation_No tools required for installation or removal_Zero-leak connections_Specifications_Brand Watts_Brass Insert No_Buy American Act Compliant NO_EAN 840213002756_Finish Plastic_Fitting Name Adapter_Inlet Connection Size 3/8 IN_Inlet Connection Type Push to connect_Inlet Material Polysulfone_Material Polysulfone_Maximum Working Pressure-BAR 17.25_Maximum Working Pressure-PSI 250_Maximum Working Temperature-Celsius 24.00_Maximum Working Temperature-Fahrenheit 75_Minimum Temperature - Celsius 0.56_Minimum Temperature-Fahrenheit 33_Outer Diameter Does Not Apply To Product_Outlet Connection Size 1/2 IN_Outlet Connection Type Female Threaded_Outlet Material Polysulfone_Outlet Thread Type NPS_Part Number 81902888_Series Female Adapter 3510_Suitable for Gas Service No
|
|
Watts AquaLock Push-To-Connect Elbows are designed and manufactured for many years of trouble free service. Produced of off white Polysulfone, a high performance thermal plastic material, the Watts AquaLock design allows for quick and easy connections without the use of installation tools. Connection shall be made using Watts AquaLock Plastic push-to-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and reuse without the use of disconnection tools. Fitting must not disassemble to disconnect. Ratings: 100 PSI at 180°F (6.8 Bar at 82°C) and 250 PSI at 75°F (17.3 Bar at 24°C). Approvals: NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061.
|
|
This 1/2 inch CTS x 1/2 inch Barb AquaLock plastic hose barb adapter works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications. Lead-free plastic fitting. Sold individually.
|
1/2 IN CTS Plastic Straight Valve, Contractor Pack_This 1/2 inch CTS AquaLock(TM) plastic straight valve works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications. Available in bulk quantities as contractor pack._25-year limited warranty_Rotates under pressure after installed for high flexibility during installation_Can be used for hot and cold water applications, including behind the wall applications_Zero-leak connections_No tools required for installation or removal_Works with copper, CPVC, PEX, and CTS rated pipe_Specifications_Brand Watts_Buy American Act Compliant NO_EAN 840213003340_Inlet Connection Size 1/2 IN_Inlet Connection Type Push to connect_Lead Free YES_Outlet Connection Size 1/2 IN_Outlet Connection Type Push to connect_Outlet Thread Type Does Not Apply To Product_Part Number 81902988_Series Straight Valve 3539
|
1/2 IN CTS x 1/2 IN NPT Plastic Male Adapter, Contractor Pack_This 1/2 inch CTS x 1/2 inch NPT AquaLock™ plastic male adapter works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications. Available in bulk quantities as contractor pack._No tools required for installation or removal_Rotates under pressure after installed for high flexibility during installation_Works with copper, CPVC, PEX, and CTS rated pipe_Zero-leak connections_Can be used for hot and cold water applications, including behind the wall applications_25-year limited warranty_Specifications_Brand Watts_Brass Insert No_Buy American Act Compliant NO_EAN 840213002701_Finish Plastic_Fitting Name Adapter_Inlet Connection Size 1/2 IN_Inlet Connection Type Push to connect_Inlet Material Polysulfone_Material Polysulfone_Maximum Working Pressure-BAR 17.25_Maximum Working Pressure-PSI 250_Maximum Working Temperature-Celsius 24.00_Maximum Working Temperature-Fahrenheit 75_Minimum Temperature - Celsius 0.56_Minimum Temperature-Fahrenheit 33_Outer Diameter Does Not Apply To Product_Outlet Connection Size 1/2 IN_Outlet Connection Type Male Threaded_Outlet Material Polysulfone_Outlet Thread Type NPT_Part Number 81902880_Series Male Adapter 3501_Suitable for Gas Service No
|
3/8 IN CTS x 1/2 IN NPT Plastic Male Adapter, Contractor Pack_This 3/8 inch CTS x 1/2 inch NPT AquaLock™ plastic male adapter works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications. Available in bulk quantities as contractor pack._Zero-leak connections_Can be used for hot and cold water applications, including behind the wall applications_25-year limited warranty_Works with copper, CPVC, PEX, and CTS rated pipe_No tools required for installation or removal_Rotates under pressure after installed for high flexibility during installation_Specifications_Brand Watts_Brass Insert No_Buy American Act Compliant NO_EAN 840213002688_Finish Plastic_Fitting Name Adapter_Inlet Connection Size 3/8 IN_Inlet Connection Type Push to connect_Inlet Material Polysulfone_Material Polysulfone_Maximum Working Pressure-BAR 17.25_Maximum Working Pressure-PSI 250_Maximum Working Temperature-Celsius 24.00_Maximum Working Temperature-Fahrenheit 75_Minimum Temperature - Celsius 0.56_Minimum Temperature-Fahrenheit 33_Outer Diameter Does Not Apply To Product_Outlet Connection Size 3/8 IN_Outlet Connection Type Male Threaded_Outlet Material Polysulfone_Outlet Thread Type NPT_Part Number 81902878_Series Male Adapter 3501_Suitable for Gas Service No
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |