Extend the range of your 12-volt lighter outlet with this 12-foot heavy duty extension cord which includes a male lighter plug power cord on one end and a female lighter outlet on the other end and a 2.4-amp USB port.
|
The Wilson 12-Volt 2+2 power outlet with phone holder powers two 12-Volt devices and two USB devices simultaneously. Features two 12-Volt power sockets 360 degree rotating phone and GPS holder with 12 volt power cord replaceable 10 Amp fuse and blue LED power indicator. This unit fits in most cup holders. Do not exceed 10 Amps maximum capacity for all devices. One 1A USB and one 2.4A USB port with 3.4 Amp total output.
|
Quickly and easily install your twin (co-phase or dual) CB antenna system with this 75 ohm 18-foot coax cable from Wilson. The outside connectors unscrew from the cable so you don't have to cut or solder anything. Just unscrew and install. FME and connector for easy installation and a high-quality super low-loss mini 8 cable. Tinned copper stranded center conductor with clear cover and 97% tinned copper shield provide low loss of performance and attenuation.
|
This coax cable is 18 feet long with hand soldered PL-259 connections and is designed for maximum performance with 97% shielding and 50-ohm impedance. Includes weather boot for outside connector protection.
|
Wilson branded high-quality 18-foot CB radio coax cable with removable connector clear outer jacket for a view into the condition of the cable as it ages and a weather boot for the outside stud connection. Rated at 50-ohms. 97% tinned copper shield. Stranded center conductor.
|
The Wilson 3 foot Silver Load FGT Series fiberglass whip in black features Wilsons Tunable Tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
The Wilson 3 foot Silver Load FGT Series fiberglass whip in white features Wilsons tunable tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
Wilson replacement CB antenna whip for T2000 and T5000 series antennas with a 49-inch stainless steel tapered whip with tip.
|
The aluminum CB antenna mount with gum drop stud is specifically designed for Wilson and heavy shaft coil type antennas. Made of aircraft quality aluminum with stainless steel hardware and an ABS material stud it also has a SO-239 connector for plug to plug hook-up.
|
Compared to the radio internal speaker a good external speaker improves both the tone and volume of what you hear and this speaker by Wilson has both crystal clear sound with superior audio quality. Constructed of 22-gauge steel this speaker includes a heavy-duty matching chrome mounting bracket a 10- foot audio cable with a 3.5mm plug and 10-watts of continuous power with 20-watts of maximum power.
|
Compared to the radio internal speaker a good external speaker improves both the tone and volume of what you hear and this speaker by Wilson has both crystal clear sound with superior audio quality. Constructed of 22-gauge steel this speaker includes a heavy-duty matching black mounting bracket a 10- foot audio cable with a 3.5mm plug and 10-watts of continuous power with 20-watts of maximum power.
|
The Little Wil magnet mount CB antenna kit is the perfect choice for a short antenna with maximum performance. The large 10oz. magnet has 300 watts of power handling capability and is made with high-impact thermoplastic. The heavy-duty coil uses 14-gauge copper wire and is a low-loss coil design. 36-inch 17-7 PH stainless steel whip base load antenna with 15-foot coax cable. With this short antenna you no longer have to remove it when driving into areas with low clearance.
|
The T2000 Series mobile CB trucker antenna with 10-inch shaft in white with an American flag design has a 49-inch stainless steel whip rated at 3500 Watts. Standard 3/8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
The T2000 Series mobile CB trucker antenna with 5-inch shaft in black with 49-inch stainless steel whip rated at 3500 Watts. Standard 3|8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high-impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
The T2000 Series mobile CB trucker antenna with 10-inch shaft in black with 49-inch stainless steel whip rated at 3500 Watts. Standard 3|8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
The T2000 Series mobile CB trucker antenna with 10-inch shaft in white with 49-inch stainless steel whip rated at 3500 Watts. Standard 3|8-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design used 10-gauge silver plated wire. The black coil is made of high impact engineered thermoplastic. Frequency range: 26MHz to 30MHz static reducing weather cap weather-band ready.
|
This Wilson antenna is the most powerful center-loaded mobile CB antenna in the world. With 5 000 AM and 20 000 SSB watts power handling capability a low loss coil design and 49-inch 17-7PH tapered spring stainless-steel whip the T5000 is a truckers dream. High-impact Mobay thermoplastic protects your antenna in all kinds of weather and the removable coil offers safe storage and makes it easier to pull into a garage. Includes 5-inch and 10-inch shafts and is weather band ready.
|
W1000 CB antenna replacement parts.
|
10 .in Replacement Stainless Steel Shaft for Wilson T2000/T5000 Series with a 3/8 x 24 standard threaded shaft.
|
The Wilson 12V 2.4 Amp dual USB adapter powers and charges multiple devices and features one 12-volt port and two 2.4 Amp ports. Fully rubberized unit with blue LED power indicator and 12-Volt Plug with replaceable 10 Amp Smart Fuse Input: DC 12-Volt Output: DC 5-Volt 2.4A Max/ DC 5-Volt 2.4A Max 12-Volt DC Bypass socket
|
12 Volt power outlet with 2 USB ports and 3.4 Amp output. 12 Volt socket with 10 Amp fused 2-wire power cord and blue LED power indicator. Includes self adhesive pad and 2 screws for mounting.
|
12 Volt power plug with positive and negative brass push posts for easy installation. Works with any 12 Volt vehicle socket or accessory outlet and has 12 Volt DC 10 Amp output with fused plug
|
The T2000 Series mobile CB trucker antenna with 5-inch shaft in red with 49-inch stainless steel whip rated at 3500 Watts. Standard .375-inch x 24-inch chromed brass ferrule. Larger coiled housing allows for increased power handling. The patented low loss air wound coil design uses 10-gauge silver plated wire. The red coil is made of high-impact engineered thermoplastic. Frequency range of 26MHz to 30MHz for happy DXing. Includes static-reducing weather cap and is weather-band ready. Set screw and hex key included for fine tuning. The Wilson Trucker will operate excellently in a dual configuration. Ideally this should be mounted so that the coil is above the vehicle body of your truck. (Not for use with a magnetic mount) The Wilson 305-492 T2000 Series CB Trucker Antenna is a popular choice among truck drivers and CB radio enthusiasts. This antenna is designed to provide high-performance communication for those who need it on the go.
|
4' Flexible Silver Load Series CB antenna fiberglass whip with .in Tunable Tip .in allows for fine tuning SWR resonant frequency. The 200 Watt antenna whip with 1/4 .in diameter tapered fiberglass construction has a chromed brass ferrule and standard 3/8 .in x24 threads. In an exclusive dark gray color and 22-gauge silver plated wire to provide higher efficiency the unique ground lead helps to insure reduced static and ignition interference and has a static reducing weather cap.
|
The Wilson 4 foot Silver Load FGT Series fiberglass whip in black features Wilsons tunable tip that allows for fine-tuning SWR and resonant frequency. The 3|8-inch diameter fiberglass rod construction has a standard 3|8-in. x 24-in. chromed brass ferrule and fully linear top-loaded maximum transfer power. It has a unique ground lead to help ensure reduced static ignition interference and a static reducing weather cap. It is weather-band ready and has a black PVC protective weather covering.
|
5 .in replacement stainless steel shaft for Wilson T2000/T500 series with a 3/8 .in x24 threaded shaft.
|
The Wilson 12 Volt dual 2.4 Amp USB adapter has a rubberized housing and a 3' cord with 10 AMP fused plug. It has two 12-Volt ports and two 2.4 Amp USB ports. Input: DC 12-Volt Output: DC 5-Volt 2.4A Max/ DC 5-Volt 2.4A Max 12-Volt DC Bypass sockets x 2
|
This mount specific for magnetic mount antennas provides a mounting base that easily works with a standard 3/8 .in mounting hole. Plated for corrosion protection the flat mount is perfect for trucks RV's and marine applications and can also be used with magnetic style satellite antennas.
|
The gum drop CB antenna stud is made of ABS material and has a SO-239 connector for plug to plug hook-up. Specifically designed for surface or roof mount applications and can be used with Wilson and heavy shaft oil can type antennas.
|
The heavy-duty stainless steel CB antenna spring fits most fiberglass CB antennas up to 5-feet with standard 3|8-inch x 24 thread fitting reducing antenna vibration. Product dimensions (Height and Depth) 3.5-inch x 1-inch.
|
The Wilson 12 Volt High Power CB Cord power cord has a rubberized plug with a replaceable 15 Amp fuse and has a 6-foot heavy-duty 14-gauge copper cord and LED power indicator for heavy-duty strain relief. Suitable for use on most 3-pin CB 10 meter radios.
|
This microphone keeper with 32" retractable cord enables quick access and stowage. Prevents damage to microphone and keeps it secure.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |