Works with all CB radios - Cars, trucks, RV's motorcycles, vans, semi's, and more...
Average tuned SWR - 1.5 Works on either single or dual antenna configurations Standard 3/8 x 24in thread All mode operation AM/FM/SSB and NOAA Alert Tunable Tip-Tune by hand, no tools needed! Static reduction cap, eliminates up to 50% of noise Recommend 18ft coax cable 5 Year Manufacturer Warranty 5/8 Wave Antenna Top Loaded Design Power Handling-900 Watts |
Heavy duty Original Series trim-to-tune 5 foot 500 watt top loaded 5/8 wave fiberglass CB antenna with 3/8"x24" threaded base.
|
|
|
3/8 x 24 Threaded Base.
100 % American Made. Double insulated 19 Gauge Copper Wire. Adjustable Tuning Range. 144-148MHZ Range 1.5:1 SWR. |
18IN PL-PL COAXIAL CB
|
|
These are our most popular mounts! The mounting clamp can be positioned horizonatally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a motorhome or the back of a Jeep. The brackets are made from cold rolled steel and are finished with chrome plating. The K-64A model has our world famous K-4A stud mount with screw on coaxial termination. All models come complete with mounting hardware. Use one of the 3-Way Mounting Brackets for single or dual antenna installation on your car, truck, van, motorcycle or motorhome. The actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm) high. With the stud in place, the height is 4.2" (107mm). They protrude outward from the vertical surface 1.9" (48mm). With the standard bolts supplied with the bracket, you can install it on a tube with a diameter up to 0.850" (22mm). If longer bolts are used, the maximum tube diameter is 1.5" (38mm).
|
Heavy duty Original Series trim-to-tune 3 foot 300 watt top loaded 5/8 wave fiberglass CB antenna with 3/8"x24" threaded base.
|
The Original Firestik KW Series CB antennas are a proven high performance antenna. KW's are constructed from a rugged solid fiberglass core and designed to be completely compatible with any Citizen's Band Radio. FireStik KW CB antenna are amazing performing as a single or co-phased antenna providing clear long range communication capability for a wide variety of mobile two-way radio installations. Cars, trucks, RVs, motorcycles, and ATV's have all achieved success with KW antennas. An adequate ground plane is required when installing KW antennas; this is usually easy to accomplish with most installations. When size matters, the KW is available in whip sized up to seven feet tall! FireStik's KW antennas are among the longest available in 5/8-wave design. Today's CB radios are often capable of receiving NOAA Weather channel alerts and the KW will pull in these signals in addition to 27 MHz CB radio traffic. The KW is a wire wound antenna custom blended with a glass fiber reinforced shaft. Standard 3/8x24 threaded ferrule ensures compatibility to the widest selection of antenna mounting solutions. Vibration resistant tapered lug nut style ferrule and static reducing water tight casing ensure that the KW antennas are built to last! FireStik original KW CB antennas are designed to be fine-tuned for lowest Standing wave ratio by trimming the loading coil. For complete information on properly tuning the KW or any CB radio antenna be sure to review CB World's complete guide to antenna tuning. When you're ready to install a new CB antenna be sure to consider the original wire-wound high performance KW antenna from the FireStik Antenna Company, providing reliable on the road communications since 1975! Dimensions: 41.25"L x 1"H x 3.25"W |
Heavy duty 3 foot 650 watt top loaded 5/8 wave CB antenna stick with tuneable tip and 3/8"x24" threaded base.
|
Heavy duty 3 foot 650 watt top loaded 5/8 wave CB antenna stick with tuneable tip and 3/8"x24" threaded base.
|
This tram 1,500W CB antenna has a heavy-duty fiberglass construction and a frequency range of 26-29 MHz and covers the complete CB band. It has a 3/8 inch x 24 thread mounting.
|
4 ft. Black 2 Meter Fiberglass Antenna
Lowest angle of radiation of any mobile VHF antenna Average tuned SWR of 1.5 to 1 over 4 MHz Over all length is 48.2-Inches (122.4 cm) Rated at 400 watts AM, 800 P.E.P. The conductor is double insulated 19 gauge copper wire |
The most popular wire-wound CB antenna in the world. This is the original Firestik design, and a proven performer since 1975. The "KW" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "KW" antennas require fine-tuning (SWR) in their final mounting location. The loading coil on all "KW" antennas is easily accessible for precise SWR adjustments. All "KW" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "KW" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "KW" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty
|
4 ft. Black .63 Wave Cb Antenna
Lightweight, Moderate power handling, Flexible fiberglass whip 5/8 wave Rated at 375 watts Loading coil is easily accessable for precise SWR adjustments 3/8"e;-24 threaded base 100% American made with 100% American materials |
|
The FireStik II FS Series Antennas feature upper coil extension to increase the power handling capability of the antenna. High performance coil maximizes the transmit/receive functions of your CB. These top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. Tunable tip requires fine tuning (SWR) in their final mounting location.
|
4' RED 5/8 WAVE CB ANTENNA
|
Heavy duty 4 foot 900 watt top loaded 5/8 wave CB antenna stick with tuneable tip and 3/8"x24" threaded base.
|
Heavy duty Original Series trim-to-tune 4 foot 400 watt top loaded 5/8 wave fiberglass CB antenna with 3/8"x24" threaded base.
|
Heavy duty 4 foot 900 watt top loaded 5/8 wave CB antenna stick with tuneable tip and 3/8"x24" threaded base.
|
4' WHITE 5/8 WAVE CB ANTENNA
|
The most popular wire-wound CB antenna in the world. This is the original Firestik design, and a proven performer since 1975. The "KW" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "KW" antennas require fine-tuning (SWR) in their final mounting location. The loading coil on all "KW" antennas is easily accessible for precise SWR adjustments. All "KW" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. The "KW" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peak performance we recommend that you use one of our 18-foot Fire-Flex coaxial cables with these antennas #DASTS-8X18. All "KW" series antennas are factory bench tested for resonant frequency and overall quality. Don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices. 5 Year Limited Warranty
|
Heavy duty 5 foot 1,000 watt top loaded 5/8 wave CB antenna stick with tuneable tip and 3/8"x24" threaded base.
|
Heavy duty 5 foot 1,000 watt top loaded 5/8 wave CB antenna stick with tuneable tip and 3/8"x24" threaded base.
|
5' Hand Tune Fiberglass CB Antenna - White
Power Handling-1000 Watts Works with all CB radios-Cars, trucks, RV's motorcycles, vans, semi's, and more... Average tuned SWR-1.5 Works on either single or dual antenna configurations Standard 3/8 x 24in thread All mode operation-AM/FM/SSB and NOAA Alert Tunable Tip-Tune by hand, no tools needed! Static reduction cap, eliminates up to 50% of noise Recommend 18ft coax cable 5 Year Manufacturer Warranty 5/8 Wave Antenna Top Loaded Design |
Original Firestik, Heavy Duty, Top Loaded Fiberglass CB Antenna, Whip Only.
Whip Color: Black Whip Length: 6 feet 5/8 Wave Trim to Tune Rated @ 300 Watts Packing Blister-1. Long description: FEATURES, FUNCTIONS AND SPECIFICATIONS: 92 cm (3 Feet) 5/8 Wave Antenna. Top Loaded Antenna. Works with All CB Radios. Covers all AM, FM and SSB Citizen Band Radio Frequencies. Average tuned SWR: 1.5 to 1. For Single or Dual Installations. Use with 550 cm (18 Feet) or Fire-Flex Coax. 3/8 Inch x 24 Heavy Duty Threaded Base. Fits all Firestik Mounts and Accessories. Cover reduces Static Noise up to 50%. |
FIRESTIK - KW7-W 7 FOOT HEAVY DUTY TRIM TO TUNE 700 WATT TOP LOADED FIBERGLASS 5/8 WAVE CB ANTENNA WITH 3/8"X24" THREADED BASE IN WHITE
|
Heavy duty Original Series trim-to-tune 7 foot 700 watt top loaded 5/8 wave fiberglass CB antenna with 3/8"x24" threaded base.
|
COAX ADAPTER PL-259 TO MOTOROLA
Allows commonly terminated coaxial cable (with PL-259 connector) to be used with an AM/FM radio or scanner |
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |