INSTALLBAY 3MHST12-1 - Heat Shrink Black 3M - 3M Heat Shrink Tubing 1/2 Inch 100 Foot Roll By Install Bay, a Metra Brand|3M Heat Shrink Tubing|1/2-Inch 100-Foot Roll
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk. Pressure-sensitive rubber based adhesive. Compatible with solid dielectric cable insulation. Compatible with rubber and synthetic splicing compounds, as well as epoxy and polyurethane resins. Tape Type: Electrical; Adhesive Material: Rubber Based; Thickness: 7 mil; Color(s): Black.
|
This non-amplified non-Onstar interface wiring harness for select 2011 and up Ford vehicles is designed to provide a 12 volt 10 amp switched accessory output along with the rest of the wires needed to install an aftermarket radio and retain the Retained Accessory Power function. Includes a direct plug in for the Universal Steering Wheel Control Interface and also provides VSS parking brake and reverse signals to an aftermarket navigation receiver making the installation easier. Feature:
|
2 Channel Adjustable Differential Line Out Converter with Amp Turn On allows you to install line level input products into a vehicles stereo system by converting speaker wire inputs to RCA outputs. Features DC amplifier turn on trigger EIA color coded inputs a compact convenient outer case for easy installation and ABS plastic vinyl and aluminum materials to enhance durability. 80 Watts maximum input. Feature:
|
4 Channel Mini 80 Watt LOC With Signal SensingTurn-On
NOTE: Additional antenna adaptors may be required for use with non-factory installed radios. World's smallest L.O.C.>4 channel input>Adjustable gain for each channel>80 watt max per channel 12 volt signal sense turn on
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
USB adaptor harness to retain the OE USB in select Hyundai/KIA vehicles
- Hyundai/KIA 2009-up
The AX-HYKIAUSB Is Used When You Want To Retain The OE USB Port On Select Hyundai/Kia Vehicles (Radio Utilizes Rear USB Input). In addition, We Included RCAs To Allow the User to Retain Their Factory Installed 3.5mm Jack (Aftermarket Radio Must Have Aux In)
Applications
Hyundai Elantra Touring 2009-2012
Hyundai Elantra 2013
Hyundai Genesis Coupe 2010-2013
Hyundai Sonata 2011-2013
Hyundai Tucson 2010-2013
Hyundai Santa Fe 2009-2013
Hyundai Sonata 2011-2013
Hyundai Tuscon 2010-2013
Hyundai Veracruz 2009-2013
Hyundai Elantra Touring 2009-2012
Hyundai Elantra 2013
Hyundai Genesis Coupe 2010-2013
Hyundai Sonata 2011-2013
Hyundai Tucson 2010-2013
Hyundai Santa Fe 2009-2013
Hyundai Sonata 2011-2013
Hyundai Tuscon 2010-2013
Hyundai Veracruz 2009-2013
Hyundai Elantra Touring 2009-2012
Hyundai Elantra 2013
Hyundai Genesis Coupe 2010-2013
Hyundai Sonata 2011-2013
Hyundai Tucson 2010-2013
Hyundai Santa Fe 2009-2013
Hyundai Sonata 2011-2013
Hyundai Tuscon 2010-2013
Hyundai Veracruz 2009-2013
Kia Amanti 2009
Kia Borrego 2009
Kia Forte 2010-2013
Kia Optima 2011-2013
Kia Optima (Aux Only) 2008-2010
Kia Rio 2009-2013
Kia Sedona 2009-2012
Kia Sorento 2011-2013
Kia Soul 2010-20 Retains OE USB Port On Select Hyundai/Kia Vehicles>Includes RCA>Retain The OE USB Port On Select Hyundai/Kia Vehicles>Harness is used when installing an aftermarket stereo>Standard color coded wires provide a consistent and simplified installation>Made from OEM quality materials
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
Male to female USB
- Extend the inputs on the chassis of your head unit or preamp out to a more convenient place under the dash or inside the glove box with these convenient cables. The female end fits neatly into a plastic mount, ready to screw to the underside of the dash or console. A generous 6' of cable makes connection to almost anywhere in the interior simple. Male to Female USB Extension Cable>Cable length is 6 feet>Female input can be "flush-mounted" into a dash or panel>Includes a mounting bracket for surface mounting>Provides quick, easy access to your stereos USB input>Perfect for decks with rear USB>Provides full data transfer>Allows charging of USB devices
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
Axxess AX-TFR1 Remote Start Install Wiring T-Harness for Select 2010-2014 Ford
Applications
FORD 2010-2014
NOTE:
1) This harness must be used in conjunction with the AX-ADXSVI
Provides accessory (12 volt 10 amp)|Retains R.A.P. (retained accessory power)|Used in non-amplified systems, or when replacing amplified system|Provides NAV outputs (parking brake, reverse, and V.S.S.)|Prewired ASWC-1 harness included (ASWC-1 sold separately)|High level speaker input|USB updatable
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
4 Channel Mini 150 Watt LOC With Signal SensingTurn-On
NOTE: Additional antenna adaptors may be required for use with non-factory installed radios. World's smallest L.O.C.>4 channel input>Adjustable gain for each channel>150 watt max per channel>12 volt signal sense turn on
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
The GMRC-01 is designed for use in select 1999-2005 Cadillac vehicles without OnStar. The GMRC-03 provides plus 12-volt accessory output and retains warning chimes through an on-board speaker.
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
|
Replace the factory receiver in select GM vehicles with this data bus interface and install a line level input into stereo systems for easy connectivity. Feature:
|
|
This 14 in. Mini A to Type A USB Adapter Harness allows you to keep the factory USB port in select 2014 and up Nissan vehicles when you install a new car stereo. This USB adapter harness will work with Apple CarPlay or Android Auto except if your vehicle has multiple USB ports or if your new aftermarket radio does not have a high amperage charging port |1.5A or greater|. Please note new stereo must have a rear USB port to use this harness. Feature:
|
3.5MM MONO PLUG (BULK)
Category: Accessories/Adaptors & Connectors |
|
This heavy duty commercial camera with hood features a high quality metal housing 120 degree viewing angle night vision 1|3 inch CMOS camera and is water resistant. Includes 4 pin Din to RCA connectors. Feature:
|
The spare tire bracket with flush mount backup camera kit includes one adjustable bracket for Jeep Wrangler vehicles 2007 and up that mounts to factory studs of spare wheel and iBeam flush mount backup camera with metal housing. Camera provides reverse guidelines. Feature:
|
Metra TE-AJPKT Rear Camera and Multi-Adjustable Spare Tire Bracket Kit for Jeep Wrangler 2007 through 2018 |
This surface mount back-up camera will make parking easier with a parking sensor that has a detectable range of 1.3- ft. to 6.5-ft. Hide-a-way buzzer provides audible warning for parking sensor helping you to avoid walls and other vehicles. Feature:
|
- Designed to be installed by the license plate under a lip like OEM cameras;- Camera is set at a 45deg angle;- CMOS II sensor;- 656 x 492 resolution;- 420TVL;- Waterproof (IP67);- Parking-assist lines;- Normal image view with the ability to be reversed via wiring;- Includes 22.5mm hole-saw bit, power cord & 20ft video cable;- Black, snap-in style;
|
- Includes oversized, under-radio storage pocket;- High-grade ABS plastic;- Contoured & textured to complement factory dash;- Includes all necessary hardware to install an aftermarket radio;
|
Double DIN Radio Installation Dash Kit for select 2004 to 2008 Acura TL vehicles allows you to install a double DIN |4in tall| aftermarket radio into your vehicles dash opening. Designed and manufactured with precision tolerances for a gapless fit between the dash and the kit. Painted matte black to match factory dash color and factory matched texture style. High grade ABS plastic construction. Feature:
|
|
Double DIN Radio Installation Dash Kit for select 1997 to 2002 Jeep Wrangler vehicles allows you to install a double DIN |4in tall| aftermarket radio or 2 Single DIN aftermarket radios into your vehicles dash opening. Designed and manufactured with precision tolerances for a gapless fit between the dash and the kit. Painted matte black to match factory dash color and factory matched texture style. High grade ABS plastic construction. Feature:
|
Single DIN Radio Dash Install Kit and Climate Control for select 2004 to 2007 Ford Taurus Mercury Sable vehicles allows you to install a single DIN aftermarket radio into your vehicles dash opening. Custom design allows retention of factory climate controls in their original location. The passenger airbag light indicator is integrated into the kit and uses the factory spring clips to allow kit to snap into the dash. Includes wiring harness. Designed and manufactured with precision tolerances fo Feature:
|
Single DIN Radio Installation Dash Kit for select 2003 to 2008 Honda Pilot vehicles allows you to install a Single DIN aftermarket radio into your vehicles dash opening. Kit fits both EX and LX models accommodates a full recessed DIN unit uses patented snap in ISO support system and includes built in under radio pocket. Designed and manufactured with precision tolerances for a gapless fit between the dash and the kit. Painted to match factory dash color and factory matched texture style. H Feature:
|
Built-in 1/2-DIN equalizer opening; Quick conversion from 2-shaft to ; Easy-to-use instructions; High-grade ABS plastic
|
Metra 82-6900 1.5" Universal Speaker Spacers for 6" x 9" Speakers NOTE: Ship only in US; |
DUAL HT SHK 1/2 4FT 3.1BK 10P Feature:
|
World's smallest 2 channel ground loop isolator Mini Ground Loop Isolator> 2-channel RCA connection>Inputs and outputs can be reversed for installation at radio or amplifier>Eliminates engine noise by isolating ground loops>Universal application
This item cannot ship to APO/FPO addresses. Please accept our apologies.
|
Snap-In ISO support system; Painted & contoured to match factory dash; DIN radio provision with pocket; ISO radio unit provision with pocket; Double-DIN radio provision; Stacked ISO head units provision
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |