The Metris PRG interfaces an aftermarket rear camera and front camera |or aux video| into the 2016 and up Mercedes Metris van. All connections are Plug and Play behind the factory screen. Forcing either camera is available via steering wheel buttons or wire triggers if desired. Please note that if the vehicle has an OEM reverse camera and you are adding an additional video source |front cam or aux video| you must use NTV KIT714 Metris F Cam instead of this kit.
|
This Camera Kit provides a factory license plate light replacement camera with composite video output for select BMW 3 X3 and X5 vehicles.
|
GM Unicam PRG
|
The Video Switcher and uConnect Camera Interface Kit allows for multiple video inputs to the factory 8.4 inch touch screen in compatible 2013 and up Dodge and Jeep vehicles supporting up to 3 video inputs simultaneously each activated through the factory dash controls.
|
JLR-17+ KIT IF BACKUP CAM 2017 RANGE ROV
|
The MyTouch VIM13|F CAM Kit enables viewing of AV input if factory equipped while in motion as well as navigation destination input while in motion and forcing the OEM front and rear cameras for select 2011 and up Ford Raptor trucks. To add extra cameras to the factory 8 inch MyFord Touch screen you need the addition of our DIFF CAM Switcher | NTV KIT437.
|
The My Touch CAM ALT Kit programs the 8 inch My Ford Touch radio for rear view camera and includes a Plug n Play differential video converter for aftermarket |composite| back up cameras for specific 2013 to 2017 Ford|Lincoln vehicles.
|
The RGB v2 Interface adds an aftermarket backup camera to the factory navigation screen in select RGB based navigation equipped vehicles. A secondary video input is included on the RGB module and can be viewed at any time by supplying power to an input wire |optional.| Some vehicle specific T Harnesses are available to combine with this interface.
|
The Streamblue Bluetooth 4.0 Audio Streaming Interface provides a seamless and secure bi directional wireless connection from your tablet or smart phone. Includes selectable analog RCA or digital S|PDIF |electrical coaxial| that allows it to be used by itself directly connected to a factory or aftermarket audio input or aftermarket amplifier or to a third party audio processing unit. StreamBlue supports pairing of up to 8 different devices and provides a 1 AMP output to turn on external devices whenever a paired device is active. Can also be used to support SWC when tablet or smart phone replaces factory radio when coupled with a vehicle compatible SWC interface. Please note StreamBlue cannot work in conjunction with the factory radio for SWC.
|
The UCT 84 Kit for select 2011 to 2018 Chrysler and Dodge vehicles with uConnect 8.4 inch screens allows for an aftermarket rear camera to be installed into the vehicle and converts composite video standard to differential video. Please note that unless the radio is already configured for rear view camera the UCT 84 Kit |NTV KIT297| is required for adding a camera.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |