AM/FM Patch Cable for AIS & VHF Antenna Splitter This 2M (6') patch cable has a BNC connector that plugs into the Vesper Marine AIS VHF Antenna Splitter and a Motorola plug to connect to your AM/FM radio. Features:
|
Antenna Cable for Cortex® V1 & M1 Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS. Features:
|
Bulkhead Connector Kit for Cortex H1 Adding a station for your Cortex H1 is as easy as mounting the bulkhead connector kit and connecting it to 12-24 VDC. |
Cellular Low Loss Cable for Cortex - 5M (16') Replacement 5M (16’) coaxial cable for the Cortex GPA680 external cellular antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna pigtail. |
Charging Handset Cradle for Cortex H1P Portable Handset Mount your H1P (portable) handset anywhere on the boat where 12-24vDC can be reached. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. The charging connectors are gold-plated preparing for the elements and suitable for mounting outdoors. |
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Cortex M1- Full Class B SOTDMA SmartAIS Transponder with Remote Vessel Monitoring - Only Works in North America Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone. Features:
The Intelligent Boat
Smart & Connected
The smartAIS Advantage
Collision Prevention
Anchor Watch
Man Overboard (MOB)
Advanced SOTDMA Technology
Connect via WiFi
10Hz GPS Update Rate
Integrated No-Loss Splitter
Low Power Consumption
Cortex Will Get Smarter.
Remote vessel monitoring and control
Easy setup, no fee
Real-time monitoring and control
The world's most advanced VHF radio
|
External Cellular Antenna with 5M (16') Cable & Mounts for Cortex M1 Extend the range of the remote monitoring by adding an external cellular antenna. The M1 Cortex transponder/hub includes a built-in cellular antenna however to increase the cellular range you can add this external antenna giving the antenna a clear view of the sky. The GPA680 comes with an antenna, 5M (16') cable, and mounts. |
External GPS Antenna with 8" Cable for Cortex M1 & 10M Coax Cable External GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision, or XB series of AIS transponders . It is IP67 and UV stable for use in a harsh marine environment. GNSS (Global Navigation Satellite System) includes GPS, GLONASS, Bei Dou and Gallileo positioning networks. Features:
Specifications:
|
External smartAIS Alarm & Mute Switch Kit for WatchMate XB-8000 The WatchMate XB-8000 smartAIS has the ability to trigger an external alarm that can be mounted anywhere onboard. If the XB-8000 detects a risk situation due to a potential collision, anchor drag, or a MOB activation, it alerts you with an alarm on your mobile device. It simultaneously sounds the external alarm which operates even if your mobile device is turned off. The alarm is designed to be easily mounted and can be connected directly to the XB-8000 without the need for external relays or other components. By simply rotating the sound output vane you can control the volume level. It is easily configured to make a steady continuous or pulsing tone like a truck backup alarm. It is heavy-duty and very robust. Its terminals are via screw down or you can use 6.35mm (1/4") quick disconnects. This alarm can be used with both 12 and 24 VDC systems. It also has reverse polarity protection to prevent damage due to incorrect wiring. Mute Switch for XB-8000 The Switch is used to mute the Alarm. Its 304 stainless steel body is durable and waterproof making it ideal for mounting both internally or externally. It is designed to be used with 12 and 24 VDC systems. Alarm Specifications:
Switch Specifications:
|
External Weatherproof Single Speaker for Cortex M1 Vesper’s External Weatherproof Speaker is designed for the marine environment. With IP66 ingress protection, they are suitable for mounting almost anywhere onboard. Compact in size, this speaker features heavy-duty molded plastic housing. Features:
|
GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1 Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck (for the underside of fiberglass decks). External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas. Specifications:
What's In The Box?
|
GPS Low Loss Patch 10M (33') Cable for Cortex Replacement 10M (33’) coaxial cable for the Cortex GPA762 GPS antenna. RG58 coaxial cable with SMA connectors and supplied with heat shrink to seal the connection to the antenna. |
Non-Powered Handset Cradle for Cortex H1 Tethered & H1P Portable Handset Mount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two-piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. Pair with a RAILBLAZA or RAM Mount style adapter to use with your favorite mounting solution. The non-powered handset cradle can be used with either the H1(tethered) or H1P (portable) handsets. |
Power Cable for Cortex - 6' Replacement 6’ Power Cable for the Cortex M1 & V1. |
Protective Cover for Vision AIS Displays Protective cover designed to fit firmly over the Vision AIS display. It will protect your Vision AIS against harsh sunlight, sea spray, and even light knocks. It is a form-fitting cover molded in a way that will hold its shape, unlike some other display protectors. The pull tab is designed as a loop that can also be used as a tether point if you require a lanyard to ensure the cover never gets lost. |
Replacement External WiFi Antenna for Cortex M1 Replacement WiFi antenna for the Cortex V1 & M1. Increase the WiFi range from the M1 (Cortex hub) by installing the external WiFi antenna. The external WiFi antenna comes included with the Cortex M1 or V1. Additionally, the WiFi range can be extended with most third-party 2.4GHz, 802.11b/g/n WiFi boosters. |
Replacement Power & Data Cable for XB & WatchMate Series - 6' Replacement power cable (2M/6.5') for Vesper XB and WatchMate series AIS transponders, receivers, or displays. |
Splitter Patch 2M Cable for Cortex M1 to External VHF 2M RG58 Coaxial Splitter Patch Cable (BNC to PL259) to connect an external VHF radio to the Cortex M1. |
VHF Patch Cable for AIS & VHF Antenna Splitter This 2M (6.5') patch cable has PL259 connectors that connect the Vesper Marine AIS VHF Antenna Splitter and your AIS WatchMate or VHF Radio. Features:
This cable can be used as a patch between the AIS WatchMate and your Vesper Marine antenna splitter. |
Waterproof USB Cable - 5M (16') USB cable for the AISWatchMate 850, AISWatchMate Vision, and XB-8000 transponders 5M (16') USB cable with a waterproof connector that twists locks into the USB socket on a Vesper Marine transponder and has a standard PC USB connector for your laptop. Because it locks into place it won't fall out due to vibration or shock. Features:
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |