- Equipment Rack Blank Panel
- Designed to fill open space between system panels - Designed to fit all standard 19ö racks and cabinets - 1 rack mount space (RMS) |
- Equipment Rack Blank Panel
- Designed to fill open space between system panels - Designed to fit all standard 19ö racks and cabinets - 2 rack mount space (RMS) |
- Blank cable management panel
- 5.25" x 19" - Fills 3 RMS open space between system panels - Rack screws not included - Black - 3 RMS |
- Cable Management Interbay Panel, 1 RMS, 6 Pack
- Provides flexibility for front cable management with a neat and clean appearance - Designed with 5 horizontal rings to manage patch cords and cables - Designed to fit all standard 19" racks and cabinets - 1 Rack Mount Space (RMS) - Removable cover included - Used with all ICCMS racks and brackets - ANSI/TIA-568-C and UL 1863 compliant |
- Cable Management Interbay Panel, 2 RMS, 6 Pack
- Provides flexibility for front cable management with a neat and clean appearance - Designed with 5 horizontal rings to manage patch cords and cables - Designed to fit all standard 19" racks and cabinets - 2 Rack Mount Spaces (RMS) - Removable cover included - Used with all ICCMS racks and brackets - ANSI/TIA-568-C and UL 1863 compliant |
- 1 RMS Blank Cable Management Panel
- 12 Pack - Designed to fill open spaces between mounted equipment - Designed to fill standard 19ö racks and cabinets - 1 RMS (Rack Mount Spaces) - Used with all standard network and equipment racks - Material: 16 GA CRS - Surface Finish: Black Powder Coat |
- Blank Cable Management Panel, 2 RMS, 12 pk
- Designed to fill open spaces between mounted equipment - Designed to fill standard 19" racks and cabinets - Available in single and four bulk packs sizes 1, 2, 3, 4 RMS (Rack Mount Spaces) - Used with all ICCMS racks and brackets |
- Cable Management L Brackets
- 25 Pack - Designed to mount to any standard EIA compliant hole spacing for custom vertical and horizontal cable management - Designed to fit all racks, wall mount brackets, and cabinets - Used with ICCMS distribution and cable management racks |
Rear Cable Management Bracket Panel 6 PackNo extra rack mount spaces (RMS) neededRear panel extends out 3" deepProvides cable support in rear of patch panels and other equipmentIntegrated cable anchor pointsFacilitates cable bend radiusDesigned to fit all standard 19ö wide racksUsed with ICCÆs 2-post, 4-post distribution racks, cable management racks, wall mount racks and hinged bracketsIntegrated tie wrap supports along the panel helps maintain cable bundles in order
|
- Rear Cable Management Bracket Panel 6 Pack
- No extra rack mount spaces (RMS) needed - Rear panel extends out 5" deep - Provides cable support in rear of patch panels and other equipment - Integrated cable anchor points - Facilitates cable bend radius - Designed to fit all standard 19ö wide racks - Used with ICCÆs 2-post, 4-post distribution racks, cable management racks, wall mount racks and hinged brackets - Integrated tie wrap supports along the panel helps maintain cable bundles in order |
Horizontal Finger Duct Front Single Sided Panel, 1 RMS, 6 PK
- Provides flexibility for front cable management with a neat and clean appearance - Designed with slotted ducts providing horizontal cable management on the front of a rack - Designed to fit all standard 19" racks and cabinets - Used with all ICCMS racks and brackets - Single-sided, 1.75 H x 19" W x 3.25" D, 1 RMS - UL 1863 compliant |
- Horizontal 24 Slot Finger Duct Cable Management
- Provides flexibility for front cable management with a neat and clean appearance - Designed with slotted ducts providing horizontal cable management on the front of a rack - Designed to fit all standard 19ö racks and cabinets - 1 rack mount space (RMS) - UL listed |
- Horizontal 24 Slot Finger Duct Cable Management
- Provides flexibility for front cable management with a neat and clean appearance - Designed with slotted ducts providing horizontal cable management on the front of a rack - Designed to fit all standard 19ö racks and cabinets - 2 rack mount space (RMS) - UL listed |
- Horizontal 24 Slot Finger Duct Cable Management 6 Pack
- Provides flexibility for front cable management with a neat and clean appearance - Designed with slotted ducts providing horizontal cable management on the front of a rack - Designed to fit all standard 19ö racks and cabinets - Used with all ICCMS racks and brackets - Single-sided, 3.50" H x 19" W x 3.25" D, 2 RMS |
1 RMS 5ö High Capacity Horizontal Finger Duct PanelProvides flexibility for front cable management with a neat and clean appearanceDesigned with slotted ducts providing horizontal cable management on the front of a rackDesigned to fit all standard 19ö racks and cabinetsUsed with all ICCMS racks and bracketsSingle-sided, 1.75 H x 19" W x 5.00" D, 1 RMSUL 1863 compliant5ö Deep horizontal channel with top and bottom slotted flexible break away fingers that can be removed to allow routing large cable bundlesDesigned to organize up to 96 patch cables horizontally on 2-post racks, 4-post racks, wall mount racks, or wall mount bracketsWhen used with the 78ö Vertical Finger Duct Panels (ICCMSCMA73), the result is a complete and professional flush-mounted matching look that meets industry standards for proper installations of cable management
|
- 2 RMS 5ö High Capacity Horizontal Finger Duct Panel
- Provides flexibility for front cable management with a neat and clean appearance - Designed with slotted ducts providing horizontal cable management on the front of a rack - Designed to fit all standard 19ö racks and cabinets - High capacity manages and organizes up to 96 patch cords - Used with all ICCMS racks and brackets - Single-sided, 3.50 H x 19" W x 5.00" D, 2 RMS - UL 1863 compliant |
Provides flexibility for vertical cable management for the front of a rackLarge finger openings accommodate high volume copper and fiber cablesFits on the sides of individual racksEquipped with feed-through holes on the back sideFlat mount, comes with two different mounting brackets for you to choose fromIncludes a covers to conceal routed cables providing a neat and clean appearanceCompatible with ICCMSR1984, ICCMSCMRH7 2-Post and ICCMSR4P844-Post Distribution Racks
|
- 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
- Low Profile boots for high-density applications. - No width wasted on boot. - Backward compatible with all lower rated category components. - Constructed with Ultra Flexible, EZ release, Snag Free Molded Strain relief. - Stranded bare 24 AWG copper wire. - Safety: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated. |
- 6 Port Cat5e Mobile Patch Panel
- Provides a 6 port outlet appropriate for open architectural environments - Suitable for use with either 4-pair or 25-pair cable - Rugged construction allows for long lasting use - Optional mounting on steel surfaces with magnets ICMAGBLOCK (not included) - Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting noise and unwanted signalsExceeds ANSI/TIA/EIA-568-B.2 Category 5e connecting hardware requirements - UL listed |
- Provides a 6-port outlet appropriate for open architectural environments
- Suitable for use with either 4 or 25-pair cable - Rugged construction allows for long lasting use - Optional mounting on steel surfaces with magnets (ICMAGBLOCK) - Enhanced crosstalk cancellation reduces return loss & noise - Exceeds ANSI/TIA/EIA-568-B.2 Cat 6 connecting hardware requirements - Used with ICPCS6 Cat 6 patch cords & ICACSPDT00 110 punch down tool - UL Listed: UL 94V-0 fire retardant |
- 100% factory tested, 50 micro inch gold plated contacts
- Exceeds ANSI/TIA-568.2-D requirements for permanent and channel link performances with ICC connectivity - Ultra slim low profile boots for high density applications, no width wasted on boot - Backwards compatible to all lower rated category components - Constructed with ultra flexible, EZ release, snag free strain relief - Stranded 28 AWG copper wire (No substandard tinned copper materials used) - UL 1863 compliant with 94V-0 rate plug, CSA, CMS, FT4 flame rated |
- 100% factory tested, 50 micro inch gold plated contacts
- Exceeds ANSI/TIA-568.2-D requirements for permanent and channel link performances with ICC connectivity - Ultra slim low profile boots for high density applications, no width wasted on boot - Backwards compatible to all lower rated category components - Constructed with ultra flexible, EZ release, snag free strain relief - Stranded 28 AWG copper wire (No substandard tinned copper materials used) - UL 1863 compliant with 94V-0 rate plug, CSA, CMS, FT4 flame rated |
- 100% factory tested, 50 micro inch gold plated contacts
- Exceeds ANSI/TIA-568-C requirements for permanent, channel link, and component performances - Ultra slim low profile boots for high density applications, no width wasted on boot - Backwards compatible to all lower rated category components - Constructed with Ultra Flexible, EZ release, snag free strain relief - Stranded 24 AWG copper wire (No substandard tinned copper materials used) - Safety: UL 1863 compliant with 94V-0 rate plug, CSA, CMS, FT4 flame rated |
- 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
- Low Profile boots for high-density applications. - No width wasted on boot. - Backward compatible with all lower rated category components. - Constructed with Ultra Flexible, EZ release, Snag Free Strain relief. - Stranded bare 24 AWG copper wire. - Safety: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated. |
- 100% factory tested, 50 micro inch gold plated contacts
- Exceeds ANSI/TIA-568-C requirements for permanent and channel link performances with ICC connectivity - Ultra slim low profile boots for high density applications, no width wasted on boot - Backwards compatible to all lower rated category components - Constructed with ultra flexible, EZ release, snag free strain relief - Stranded 24 AWG copper wire (No substandard tinned copper materials used) - UL 1863 compliant with 94V-0 rate plug, CSA, CMS, FT4 flame rated |
- 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
- Low Profile boots for high-density applications. - No width wasted on boot. - Backward compatible with all lower rated category components. - Constructed with Ultra Flexible, EZ release, Snag Free Strain relief. - Stranded bare 24 AWG copper wire. - Safety: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated. |
-100% Factory Tested, 50 Micro Inch Gold-plated contacts.
-Low Profile boots for high-density applications. -No width wasted on boot. -Backward compatible with all lower rated category components. -Constructed with Ultra Flexible, EZ release, Snag Free Strain relief. -Stranded bare 24 AWG copper wire. -Safely: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated |
- 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
- Low Profile boots for high-density applications. - No width wasted on boot. - Backward compatible with all lower rated category components. - Constructed with Ultra Flexible, EZ release, Snag Free Strain relief. - Stranded bare 24 AWG copper wire. - Safety: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated. |
- 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
- Low Profile boots for high-density applications. - No width wasted on boot. - Backward compatible with all lower rated category components. - Constructed with Ultra Flexible, EZ release, Snag Free Strain relief. - Stranded bare 24 AWG copper wire. - Safety: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated. |
- 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
- Low Profile boots for high-density applications. - No width wasted on boot. - Backward compatible with all lower rated category components. - Constructed with Ultra Flexible, EZ release, Snag Free Strain relief. - Stranded bare 24 AWG copper wire. - Safety: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated. |
-CAT5e Clear Boot Patch Cord
- 14' White - Product is white - Image is representative |
- 100% factory tested, 50 micro inch gold plated contacts
- Exceeds ANSI/TIA-568-C requirements for permanent, channel link, and component performances - Ultra slim low profile boots for high density applications, no width wasted on boot - Backwards compatible to all lower rated category components - Constructed with Ultra Flexible, EZ release, snag free strain relief - Stranded 24 AWG copper wire (No substandard tinned copper materials used) - Safety: UL 1863 compliant with 94V-0 rate plug, CSA, CMS, FT4 flame rated |
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |